How to manually remove a tire?
3 Answers
Clear any tools and debris around the tire removal machine that may obstruct the operation. Before removing the tire, completely deflate all the air inside the tire and remove all the lead weights on the wheel rim. Place the tire in the tire compression position, and use the rim separation shoe to press the tire to create a gap between the tire and the rim, ensuring complete separation of the tire from the rim. Step on the rotation pedal to make the tire removal machine's worktable rotate clockwise, and remove the outer side of the tire. Use the same method to remove the inner side and extract the tire from the rim.
Last time I changed my tires myself, it was quite interesting. First, I had to find a flat spot to park the car, pull the handbrake tight, and put it in P gear to prevent the wheels from rolling. I used a wrench to loosen the lug nuts a bit, but didn't take them all the way off. Then, I jacked up the car, making sure to position the jack at the designated points on the frame to avoid slipping. After lifting, I made sure the tire was well off the ground before removing the nuts, then pulled the tire off with both hands and set it aside. The first time I tried, I was all over the place—the jack almost slipped, so I’d recommend getting a friend to help or practicing a few times in a parking lot first to make it easier and safer. Also, tires are heavy, so lift steadily to avoid hurting your back.
I often DIY car repairs and am quite skilled at removing tires. The key tools are a wrench and a hydraulic jack. Park the car on a hard surface and engage the parking brake. Loosen the nuts about halfway and stop, don't remove them completely. Use the jack to lift the car—the lifting points vary by model, with SUVs usually under the frame. Once lifted, remove the nuts and take off the tire. Sometimes it's stuck tight, so a rubber mallet can help loosen it with a few gentle taps. Take your time during the process; lifting the car must be stable. If the ground is uneven, use wheel chocks to prevent the car from sliding. Place the removed tire against a wall to avoid it falling and causing injury. Having all the tools ready saves a lot of effort—after a few tries like me, it becomes much easier.
