How to Manually Fold the Rearview Mirror?

1 Answers
LaKiara
07/24/25 8:36pm
Correct method for manually folding the rearview mirror: Hold the base of the rearview mirror with one hand and push the mirror backward with the other hand. Apply force backward to fold the manual rearview mirror, but avoid using excessive force; lift it slightly upward. If you are unable to do it yourself, it is recommended that the owner seek assistance from someone with the proper technique to avoid unnecessary damage. Adjusting the left rearview mirror: When adjusting the left rearview mirror vertically, position the distant horizon at the center, and adjust the left and right positions so that the car body occupies one-fourth of the mirror's surface. The central rearview mirror is effective for controlling the distance between vehicles; adjust the left and right positions so that the left edge of the mirror just cuts to the right ear of your reflection in the mirror.
Was this review help?
2
2
Share
More Forum Discussions

What does China 5 and China 6 mean for vehicles?

China 5 and China 6 refer to vehicle emission standards. The differences between China 5 and China 6 are as follows: 1. The China 6 emission standard is an upgraded version of the current China 5 standard, imposing stricter limits on emissions of CO (carbon monoxide), THC (total hydrocarbons), NMHC (non-methane hydrocarbons), NOX (nitrogen oxides), and PM (particulate matter) compared to China 5. 2. China 6 also introduces new regulations on PN (particulate number) emissions. According to estimates, under the China 6 standard, light gasoline vehicles will see a reduction of approximately 50% in emissions of carbon monoxide, hydrocarbons, non-methane total hydrocarbons, and nitrogen oxides compared to the China 5 phase, with particulate emissions reduced by about 40%. For heavy-duty diesel vehicles, nitrogen oxides and particulate matter will be reduced by more than 60% compared to the China 5 phase. 3. In addition to stricter emission requirements, the cold-start test cycle has been adjusted from the NEDC cycle in China 5 to the WLTC cycle in China 6, resulting in an increase in actual emissions. The dual-idle test will be changed to an actual driving emissions (RDE) test starting from July 1, 2023, leading to higher tailpipe emissions. Given that vehicle emissions account for 20% to 40% of air pollution in major cities, implementing China 6 can significantly improve urban air quality by more than 10%.
11
2
Share

How to Start the Mazda 3 When the Key Fob Battery is Dead?

You can pull out the mechanical key by releasing the safety latch on the back of the key fob to start the car. The Mazda 3 key fob mainly consists of a transmitter and a receiver. To replace the battery in the Mazda 3 key fob, follow these steps: 1. Locate the button on the back of the key fob and pull out the mechanical key. 2. Use a flat-head screwdriver to separate the key fob cover along the middle seam. 3. Replace with a new battery, ensuring the positive side faces upwards, then reattach the protective cover. 4. Press the outer cover back into place by squeezing the top and bottom parts together.
4
5
Share

How to Check Gasoline Quality?

Gasoline quality can be checked using the following methods: 1. Observe engine performance and compare mileage changes. High-quality gasoline contains fewer impurities, resulting in smoother and more complete combustion after filtration. The engine runs quietly and smoothly without jerking. Since high-quality gasoline burns more completely than low-quality gasoline, vehicles using the same amount of high-quality gasoline will achieve longer mileage. 2. Listen to the engine sound. Poor-quality gasoline, due to impurities, makes the engine sound dull and causes noticeable vibrations, especially during uphill driving or acceleration. In contrast, good gasoline produces almost no vibration and very little noise. 3. Check the color and smell the odor. Visually, inferior gasoline appears cloudy and unclear, with suspended particles in the middle and sediment at the bottom. Observe the exhaust color; if it appears black or unusually white, it indicates low-quality gasoline. If these signs are hard to identify, try smelling the gasoline. Gently wave your hand over it; a pungent and unpleasant odor indicates poor-quality gasoline.
18
4
Share

Which brand of tires does the Levin car use?

The 2019 Levin model uses three brands of tires: Dunlop, with specifications of 205/55R16; Bridgestone, with specifications of 225/45R17; and Yokohama, with specifications of 205/55R16. Additional information: 1. Levin tires are circular elastic rubber products assembled on various vehicles or machinery for ground rolling. They are typically mounted on metal rims, supporting the vehicle body, cushioning external impacts, ensuring contact with the road surface, and maintaining the vehicle's driving performance. Tires are often used under complex and demanding conditions. 2. While driving, tires endure various deformations, loads, forces, and high and low temperatures. Therefore, they must possess high load-bearing, traction, and cushioning performance. Additionally, they are required to have high wear resistance and flex resistance, as well as low rolling resistance and heat generation. Half of the world's rubber consumption is used for tire production, highlighting the significant demand for rubber in tire manufacturing.
17
0
Share

What is the displacement of the Bluebird?

The Bluebird is equipped with a 1.6-liter naturally aspirated engine codenamed HR16 across all models, so the displacement of the Bluebird is 1.6 liters. Here is more information about the Bluebird: 1. The 1.6-liter naturally aspirated four-cylinder engine of the Bluebird produces 126 horsepower and a maximum torque of 168 Nm. This engine reaches its maximum power at 5,600 rpm and its maximum torque at 4,000 rpm. It features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. 2. The engine is paired with either a 5-speed manual transmission or a CVT transmission. The CVT transmission is particularly suitable for family cars due to its simple internal structure, which consists of only two pulleys and a steel belt. The steel belt can move along the pulleys, allowing the transmission to vary speed and torque smoothly. The CVT transmission provides a very comfortable driving experience with almost no noticeable shifts during operation.
4
3
Share

Does a 48V Hybrid Vehicle Need to Be Charged?

48V mild hybrid systems do not require charging. The differences between plug-in hybrid and regular hybrid vehicles are as follows: 1. Plug-in hybrid vehicles have better acceleration performance compared to regular hybrid vehicles. 2. Regular hybrid vehicles have smaller motor power and battery capacity. Plug-in hybrid vehicles, due to their larger battery packs, require the use of a charger to charge the battery pack. 3. Only plug-in hybrid vehicles and pure electric vehicles can be registered with green license plates, while regular hybrid vehicles cannot.
12
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.