How to Manually Change the Transmission Oil for a Buick Excelle?

[VonRichard]

Buick Excelle manual transmission oil change method is: 1. Unscrew the drain nut at the bottom of the transmission oil pan; 2. Use a container to catch the draining transmission oil, and after it is completely drained, make sure to tighten the drain nut on the transmission oil pan; 3. Pull the hood release lever and use the support rod to prop it up; 4. Unscrew the transmission oil filler cap and add new oil. Relevant information about the Buick Excelle is as follows: 1. The Buick Excelle's dimensions are 4468mm in length, 1765mm in width, and 1469mm in height, with a wheelbase of 2611mm. 2. The vehicle's powertrain is equipped with a 1.3L Ecotec dual-injection engine, paired with a CVT intelligent continuously variable transmission, delivering a maximum power of 79kW and a maximum torque of 133Nm.

[DelMaci]

I've changed the transmission fluid for my Buick Excelle several times by myself, and it's quite interesting. The car needs to be parked on level ground, ensuring the engine has cooled for at least half an hour—burn hazards are serious. Use a jack to lift the front wheels, safety first. Crawl under the car to locate the transmission drain plug, usually a 17mm hex type. Use an empty bucket to catch the old fluid, unscrew it slowly, and be careful of splashing on yourself or the ground. After draining completely, check if the plug washer is damaged or worn. The fill hole is located on top of the transmission; it's recommended to use new Dexron VI fluid, slowly pouring it in with a funnel or hand pump. After refilling, start the engine and check if the fluid level is within the proper range. It's best to wear gloves and goggles during the whole process to avoid skin contact with the oil. Once done, take it for a test drive—the shifting will feel much smoother, and you'll save money, hundreds of dollars each time. Remember to properly recycle the old fluid and avoid polluting the environment.

[LaMia]

I believe that manually changing the transmission fluid requires extra caution, especially for cars like the Excelle. First, the car must be parked on a level surface with the engine completely cooled, as hot fluid can easily cause burns. Then locate the drain plug at the bottom, prepare a container to catch the fluid before loosening it with a wrench, and avoid letting the old fluid spill everywhere. After draining completely, clean the area and re-tighten the plug. When refilling, use the correct type of automatic transmission fluid, such as Dexron VI, and slowly pour it in through the fill hole on top. If you encounter any fluid level issues during the process, consult the manual or reference videos first. After finishing, take a short test drive to check for any unusual noises or leaks. Honestly, beginners are not advised to attempt this alone, as mistakes could damage the transmission or contaminate the ground. For regular maintenance, I often consult experienced friends or take it directly to a professional shop, as they provide more thorough inspections to ensure safety.

[McKingston]

Manually changing transmission oil is not difficult, with clear steps. Park the car on a level surface and wait for the engine to cool completely. Use a jack to lift the front, then crawl underneath to locate the transmission drain bolt. Unscrew it to fully drain the old oil while inspecting the bolt's seal. After cleaning, pour in new Dexron VI oil, ensuring the level stays within the standard range. The Excelle owner's manual provides a reference diagram for the filling location. Wear protective gear throughout the process and dispose of the old oil properly. After completion, start the engine to test for any abnormalities. Regular oil changes prevent excessive transmission wear and extend its lifespan.