How to Make the Windshield Wiper Spray Water?

1 Answers
DelNolan
07/30/25 4:26am
Method to make the windshield wiper spray water: The spray switch is located on the wiper control lever on the right side of the steering wheel. Pull the control lever toward the driver to activate the spray. Regularly check the windshield washer fluid level and refill it promptly if it is too low to prevent dry wiping. Reasons why the windshield wiper does not spray water in winter: 1. Insufficient windshield washer fluid, preventing the pump from drawing it up; 2. Inappropriate windshield washer fluid selection, causing it to freeze in cold weather and potentially crack the washer fluid reservoir; 3. Malfunction of the wiper spray motor; 4. Faults in the wiper spray tubing or nozzles.
Was this review help?
12
3
Share
More Forum Discussions

How to Replace the Key Battery for the New Mercedes-Benz S350L 4MATIC?

Here is how to replace the key battery for the new Mercedes-Benz S350L 4MATIC: 1. There is a button on the back of the key. Press this button and slide the back cover forward to open the key. 2. The battery is located in a slot nearby. Remove the old battery by opening the slot and replace it with a new one. 3. Reattach the back cover of the key. Once installed, the battery replacement is complete. Related information about the Mercedes-Benz S350L: The Mercedes-Benz S350L is a full-size luxury sedan under the Mercedes-Benz brand. The dimensions of this vehicle are 5259 mm in length, 1899 mm in width, 1497 mm in height, with a wheelbase of 3165 mm.
19
1
Share

What Causes Difficulty in Cold Engine Start?

Difficulty in cold engine start is caused by: 1. Malfunctioning cold start injector; 2. Fuel injector leakage; 3. Incorrect ignition timing; 4. Open circuit in wiring from start switch to ECU; 5. Too low cylinder compression pressure; 6. Air leakage in intake system; 7. Too low fuel pressure; 8. Clogged air filter; 9. Faulty coolant temperature sensor; 10. Malfunctioning mass air flow sensor; 11. Faulty idle control valve or auxiliary air valve. Solutions for cold start difficulty include: 1. Check battery condition; 2. Replace with appropriate engine oil; 3. Replace spark plugs promptly. Methods for warming up the engine: 1. Drive after 30 seconds to 1 minute of idling; 2. Maintain low-speed driving; 3. Normal driving can commence after engine temperature reaches optimal operating range.
6
3
Share

What is the voltage of the cigarette lighter in Nissan Qashqai?

Nissan Qashqai's cigarette lighter is 12V. The cigarette lighter draws power from the car's electrical system to heat a metal heating element or wire, providing a flame source for lighting cigarettes. The Nissan Qashqai has body dimensions of 4401mm in length, 1837mm in width, and 1593mm in height, with a wheelbase of 2646mm and a fuel tank capacity of 57 liters. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 151PS and a maximum power output of 111kW. The transmission is a CVT (Continuously Variable Transmission). The front suspension is a MacPherson strut independent suspension, and the rear suspension is a multi-link independent suspension.
4
0
Share

How Long Can Car Paint Last?

Car paint can last for 5 to 6 years, and the maintenance methods are: 1. Wash the car after the engine has cooled down; 2. Reduce exposure to direct sunlight; 3. Clean stains on the car body promptly; 4. Rinse with clean water after rain to prevent acid rain corrosion; 5. Apply wax or glaze. The method for car painting is: 1. Remove oil stains and rust from the car body surface, degrease plastic surfaces, and keep the surface clean; 2. Use zinc phosphate solution to phosphorate the car body surface, rinse with clean water, and wait for the body to dry before painting; 3. Pay attention to air pressure and nozzle size during spraying, ensuring the paint is applied evenly and smoothly; 4. After painting, drive the car into a paint baking room to dry quickly and solidify the paint.
7
1
Share

Why Did the Battery Suddenly Lose Power?

There are generally the following reasons for a car battery losing power: 1. The car has been parked for a long time, causing the battery to discharge. Even when the car is idle, the battery naturally discharges due to its inherent characteristics, meaning it loses power even when not in use. Most modern cars are equipped with anti-theft systems that continue to operate while the vehicle is parked, requiring a certain amount of power. Additionally, alarm systems consume even more power when triggered by external forces that meet the sensitivity threshold. 2. The battery has reached the end of its lifespan. Most private vehicles today use maintenance-free batteries. To check the battery's condition, clean the inspection window on the battery and observe the color inside: green indicates the battery is functioning normally; black means the battery voltage is low and needs charging; white signifies the battery has reached the end of its life, and the only solution is to replace it with a new one.
5
1
Share

How to reset the maintenance light on Great Wall M4?

Great Wall M4 manual maintenance light reset method is as follows: (1) Manual reset method: 1. Press and hold the reset button "A", while stepping on the brake, turn the ignition switch to "on" position (do not start the engine). 2. When the "INSP" message flashes or the display screen blinks, continue holding the reset button "A" until "..." appears on the display. 3. Release the reset button "A" and the brake pedal, then turn the ignition switch back to "Off" position to complete the reset process. (2) Alternatively, you can visit a 4S dealership to perform the reset using specialized equipment.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.