How to Make the Steering Wheel Lighter When It's Too Heavy?

1 Answers
AaronLynn
07/30/25 2:23am
Methods to make a heavy steering wheel lighter: First, check the car's power steering fluid. A common reason for a heavier steering wheel is dirty power steering fluid. Like other automotive fluids, power steering fluid needs to be replaced. Another possible cause is low tire pressure, which can also make the steering wheel feel heavier. If these issues are ruled out, it's necessary to use diagnostic equipment for a comprehensive inspection of the steering system. Most vehicle models use a hydraulic power steering system, which is further divided into mechanical hydraulic steering and electro-hydraulic steering. Both work on a similar principle: the hydraulic pump (driven by the engine belt) provides oil pressure to push the piston, thereby generating auxiliary force to move the steering linkage and assist in wheel steering.
Was this review help?
3
0
Share
More Forum Discussions

Does idling with the air conditioning on harm a diesel vehicle?

Idling with the air conditioning on can indeed harm a diesel vehicle. The following are the hazards of idling with the AC on: Reduced battery lifespan: In principle, the air conditioning compressor is driven by the engine, while the blower fan is powered by the battery. During idling, the vehicle may not necessarily charge the battery. Excessive power consumption by the blower fan can lead to battery depletion, thereby affecting the battery's lifespan. Carbon buildup: Keeping the AC on while idling requires continuous engine operation. Prolonged idling can also impact the engine. When idling for extended periods, the gasoline entering the combustion chamber may not burn completely. Incomplete combustion produces large amounts of carbon monoxide, and some carbon deposits may accumulate. Since the airflow into the engine during idling is low, the flushing effect on carbon deposits is minimal. This increases the risk of carbon buildup in the engine.
3
4
Share

How to Apply for ETC for Cars?

ETC can be applied for at bank branches, highway service areas, and other authorized institutions. The application requires the original and photocopies of the vehicle owner's valid ID card and vehicle license. If the application is not made by the owner, the agent's valid ID card is also required. The photocopy of the vehicle license should include the page with the most recent annual inspection stamp. A postal credit card application form is needed, which will be used to bind the ETC card. After obtaining the credit card, swipe it twice and present the POS receipt at a designated postal outlet to receive and install the ETC onboard device for free, with no additional charges. Applicants must be between 18 and 60 years old and own the vehicle in their name. ETC stands for Electronic-Toll-Collection, meaning electronic toll collection system. The application requires the original and photocopies of the vehicle owner's valid ID card and vehicle license. If the application is not made by the owner, the agent's valid ID card is also required. The photocopy of the vehicle license should include the page with the most recent annual inspection stamp. A bank card for deducting highway toll fees is also needed. Applicants must be between 18 and 60 years old and own the vehicle in their name. Here are some precautions for installing ETC: Do not obstruct the view; it is best to install it behind the rearview mirror: Many car models have a steeply inclined windshield, which can reduce the driver's field of vision. Installing ETC without considering this may increase blind spots. Install it on the right side behind the rearview mirror to avoid obstructing the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement, as it has a solar panel on the back for self-charging. Therefore, avoid installing it on the blackened areas of the windshield or where the solar panel might be blocked. Do not remove it arbitrarily once installed: The button in the middle of the adhesive is an anti-removal lever connected to a switch. After installation, the windshield will press the anti-removal lever in. If removed arbitrarily, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. You will need to visit an ETC service point to unlock it. This is designed to prevent multiple vehicles from sharing one device. When using ETC, note: The ETC transaction sensing range is 8 meters. To avoid paying for the vehicle in front due to its faulty ETC device, maintain a distance of at least 10 meters from the vehicle ahead. The ETC lane recognition speed is 20 km/h; driving too fast may result in failure to read the vehicle's device information and toll deduction failure. If using a debit card to bind ETC, insufficient balance may also cause toll deduction failure.
19
1
Share

What does DPF regeneration mean in diesel vehicles?

DPF stands for "Diesel Particulate Filter," which directly translates to "diesel particulate trap," also known as a diesel particulate filter regenerator. It is a device designed to reduce particulate matter (PM) emissions in exhaust gases. Additional information: Wall-flow filter: DPF typically employs a wall-flow filter, which forces the exhaust gas to pass through porous walls by alternately blocking the inlet and outlet of the carrier channels, thereby capturing particles. Upstream DOC catalyst oxidation: The DOC (Diesel Oxidation Catalyst) oxidizes NO generated during combustion in the diesel engine to form NO2. Effective PM removal: Once inside the DPF, the NO2 molecular bonds break at relatively low temperatures (around 250°C), releasing oxygen that reacts with the captured carbon particles to form CO2. Most normal driving conditions of diesel engines can meet the DPF regeneration temperature range (250°C~500°C), thus effectively removing PM.
4
3
Share

Can Diesel Engine Oil Replace Gasoline Engine Oil?

Diesel engine oil cannot replace gasoline engine oil. Below is an introduction to the relevant content: Explanation: Although gasoline engines and diesel engines operate on similar principles, their fuel types, operating temperatures, rotational speeds, loads, and other factors differ significantly, leading to considerable differences in the formulations of gasoline engine oil and diesel engine oil. Function: Gasoline engines operate at relatively higher speeds, so gasoline engine oil emphasizes anti-wear performance. In addition to the primary functions of gasoline engine oil—such as cleaning, lubrication, cooling, rust prevention, and shock absorption—diesel engine oil also requires higher alkalinity to neutralize the acidic sulfur-containing substances produced during diesel combustion, a feature generally absent in gasoline engine oil. Furthermore, gasoline engines are smaller in size and generate a large amount of sludge due to oxidation during combustion, requiring the lubricating oil to have strong dispersing properties to break the sludge into smaller particles and prevent clogging the oil filter. Diesel engines, being larger in size, produce significant carbon deposits during combustion, necessitating lubricating oil with strong cleaning properties.
12
1
Share

Does a diesel car with excessive exhaust require a major overhaul?

No. Excessive car exhaust is mostly caused by engine issues. Below are the reasons for excessive engine exhaust and the corresponding solutions: Reason 1: The main cause is severe wear between the piston rings and cylinder liners. Solution 1: To prevent excessive exhaust, it is recommended to replace the piston rings and cylinder liners. Reason 2: Incomplete combustion in the engine or mechanical engine failure, such as severe wear of the cylinder liners and pistons, excessive clearance between the cylinder and piston, etc. Excessive clearance between the cylinder and piston allows too much engine oil to enter the cylinder, and excessive oil in the oil pan. During splash lubrication, a large amount of oil enters the cylinder. High-temperature gases in the cylinder enter the oil pan, contaminating and thinning the oil, which affects lubrication and leads to excessive exhaust. The fuel system, intake system, and fuel injectors not being regularly maintained can result in carbon deposits and sludge buildup. Solution 2: The remedy is to have the vehicle inspected and repaired at a maintenance shop.
14
5
Share

What is the highest grade model for diesel engine oil?

The highest grade for diesel engine oil is CJ-4. The grades of diesel engine oil are roughly categorized as: CA, CB, CC, CD, CE, CF, CF-4, CG-4, CH-4, CI-4, CJ-4. Different models of diesel engine oil grades indicate varying oil grade levels and corresponding applicable vehicle types, meaning the further the letters are in the sequence, the higher the oil quality grade, and so on. API engine oils are divided into two categories: "S" series: The "S" series represents oils for gasoline engines, with specifications including: API SA, SB, SC, SD, SE, SF, SG, SH, SJ, SL, SM, SN. "C" series: The "C" series represents oils for diesel engines. When both "S" and "C" letters are present, it indicates that the oil is suitable for both gasoline and diesel engines. The SN grade is currently the highest grade of oil. SJ was the standard in the 1990s, SL was the standard in 2001, SM was the standard in 2004, and SN was the standard in 2010.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.