How to Make Side Mirrors Fold Automatically When Locking the Car?

How to Solve Front-Wheel Drive Car Skidding During Start?

Solutions for front-wheel drive car skidding during start are as follows: 1. Start with less throttle input; for manual transmission cars, you can use the clutch half-engagement method to start. 2. If the car still skids after step 1, you can start in 2nd gear because the torque in 2nd gear is lower than in 1st gear, resulting in less power during start and reducing the likelihood of skidding. Tips to prevent car skidding are as follows: 1. Slow down when turning and accelerate by pressing the throttle after exiting the turn. 2. Regularly check the tires or replace them with tires that have greater friction. 3. Regularly inspect the brake pads and replace them when the wear is below 6mm. 4. Keep the ESP (Electronic Stability Program) and ABS (Anti-lock Braking System) turned on while driving.

13

1

Share

Is the Driver Fully Liable for Hitting Someone While Reversing?

In cases where a driver hits and injures someone while reversing the vehicle, the driver is generally held fully liable. According to Article 50 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China": When reversing a motor vehicle, the driver must observe the situation behind the vehicle and ensure it is safe before reversing. Reversing is prohibited at railway crossings, intersections, one-way roads, bridges, sharp curves, steep slopes, or tunnels. More details about reversing accidents are as follows: Exercise caution while reversing: Due to blind spots, the driver may fail to notice pedestrians in these areas or may directly collide with vehicles behind because of obstructed visibility caused by blind spots. Additionally, many modern vehicles are equipped with reversing radar or rearview cameras to assist drivers, but these should not be solely relied upon. Drivers should still carefully observe their surroundings. Insurance compensation: In cases where the driver is fully liable for hitting someone while reversing, the insurance company will compensate for the actual losses caused by the accident within the policy limits.

12

3

Share

Can Tire Pressure Monitoring Prevent Tire Blowouts?

Tire pressure monitoring cannot prevent tire blowouts. To prevent high-speed tire blowouts, pay attention to the following points: 1. Regularly maintain your tires, checking for punctures, cuts, or bulges caused by broken cords. 2. Monitor tire lifespan; replace tires based on mileage, road conditions, and wear. 3. Develop a habit of checking tire pressure—measure it monthly and top up as needed. Always check tire pressure before highway driving to ensure it's within the normal range. 4. Prevent excessive tire temperature on highways by avoiding prolonged high-speed driving. Take breaks in rest areas to cool tires. 5. Maintain good driving habits, control speed, and avoid sudden acceleration, hard braking, and sharp turns.

17

0

Share

What to Do When the Sponge in Car Seats Gets Wet?

Here are the solutions when the sponge in car seats gets wet: 1. Before the liquid completely soaks in, use items like tissues or towels to quickly wipe away excess water, then avoid squeezing to prevent the liquid from seeping further down. 2. If the liquid hasn't soaked in too much, you can consider using a hairdryer to dry it after heating, then place desiccants on the seat surface when the car is unoccupied. However, avoid using quicklime as a desiccant to prevent unnecessary trouble caused by heat generation when it comes into contact with water. 3. If it's summer, you can consider parking the car under the sun, then laying black canvas on the seats. The absorbed heat will raise the seat temperature, speeding up water evaporation, and open the car windows to let the moisture out. 4. If too much liquid has soaked in and you can't handle it yourself, you can take it to a repair shop for professional treatment.

20

3

Share

What are the consequences of receiving penalty points on an A1 driver's license?

a1 driver's license holders must attend a 3-hour theoretical study session at the vehicle management office within 15 days after the registration date ends if they receive penalty points. Driver's licenses are categorized into Class A, Class B, and Class C licenses. The cumulative penalty point cycle for road traffic safety violations (i.e., the penalty point cycle) is 12 months, with a maximum of 12 points. If all 12 points are deducted within this cycle, a Class C license will be suspended, requiring the holder to retake the test. For Class A and Class B licenses, the holder must attend a study session. Specific details are as follows: Class A and Class B Licenses: If a Class A or Class B license holder receives any penalty points, even just 1 point, within the penalty point cycle, they must attend a 3-hour theoretical study session at the vehicle management office within 15 days after the registration date ends and provide a physical examination certificate, i.e., annual review, otherwise the driver's license will become invalid and will be revoked after three cycles. This does not apply to receiving 12 points during the probationary period. If 6 points are received during the probationary period, the probationary period will be extended by one year. If 6 points are received consecutively for two years, the license will be directly downgraded. Regardless of the penalty point cycle, receiving 12 points will result in an immediate downgrade. Class C Licenses: If less than 12 points are received within a cycle, the points for a Class C license will be reset to zero, and no study session is required. If all 12 points are deducted within a cycle, the Class C license will be suspended, and the holder must retake the test.

3

1

Share

What is the working principle of Exhaust Gas Recirculation?

Exhaust Gas Recirculation (EGR) system works to reduce the emission of nitrogen oxides (NOX) in the exhaust gases. Below is an introduction to the EGR system: 1. The EGR valve controls the amount of exhaust gas flowing back from the exhaust manifold to the intake manifold through three metering orifices of increasing diameters, creating seven different flow combinations. Each metering orifice consists of a solenoid valve and a needle valve. When the solenoid is energized, the armature is pulled upward by the magnet, opening the metering orifice. The rotary needle valve ensures good sealing when the EGR valve is closed. 2. The EGR valve typically opens under the following conditions: (1) When the engine is warm and running. (2) When the engine speed exceeds idle. 3. The ECM controls the EGR system based on inputs from the engine coolant temperature sensor, throttle position sensor, and air flow sensor.

16

3

Share

How to Make Side Mirrors Fold Automatically When Locking the Car?

How to Solve Front-Wheel Drive Car Skidding During Start?

Is the Driver Fully Liable for Hitting Someone While Reversing?

Can Tire Pressure Monitoring Prevent Tire Blowouts?

What to Do When the Sponge in Car Seats Gets Wet?

What are the consequences of receiving penalty points on an A1 driver's license?

What is the working principle of Exhaust Gas Recirculation?

Can I renew my driver's license if it has been expired for less than a year?

Should I Shift to N Gear When Parking an AT Transmission?

Can an SUV tow a trailer?

Is Pengcheng Motorcycle Worth Buying?