···
Log in / Register

How to Make Black Car Paint Look Darker and Shinier?

1 Answers
Barros
07/23/25 6:12pm

Repainting is a common method to restore the gloss of car paint. Through grinding and polishing, removing the oxidized paint surface can make the car regain its luster, temporarily restoring the color to its original state when the car was new. Forming a wax film on the car paint surface can inhibit the oxidation effect of harmful external components on the paint. Applying a protective film over the car paint can prevent it from being oxidized by external factors.

Was this review help?
14
2
Share
More Forum Discussions

Does the Tiguan X have a particulate filter?

Tiguan X is equipped with a particulate filter, as all China VI standard vehicles come with particulate filters. A particulate filter is a ceramic filter installed in the diesel engine's emission system, designed to capture particulate emissions before they enter the atmosphere. It can reduce the soot produced by diesel engines by more than 90%, and the captured particulate matter is subsequently burned off during vehicle operation. How the particulate filter works: The diesel particulate filter is coated with metals such as platinum, rhodium, and palladium. The black smoke containing carbon particles emitted by the diesel engine enters the engine's exhaust particulate trap through a dedicated pipe. Inside, a densely arranged bag-type filter captures the carbon particles on a filter made of metal fiber felt. When the accumulated particles reach a certain level, the burner at the end automatically ignites, burning off the captured carbon particles and converting them into harmless carbon dioxide. To check if the Tiguan X has a particulate filter, you can use the following three methods: 1. Refer to the and to see if there is a particulate filter function. Additionally, carefully check the fault codes in the manual to see if there is a "particulate filter" warning light indicator. 2. Check the label on the oil cap. If the oil cap clearly indicates the use of 0W-20 grade oil, it means the vehicle is equipped with a particulate filter. 3. Look at the exhaust pipe behind the three-way catalytic converter to see if there is an additional cylindrical section. If present, that is the particulate filter.
14
0
Share

No Response When Pressing the One-Button Start?

Here is the relevant information about the one-button start not responding: 1. Frequently placing the car key near electronic devices such as mobile phones, computers, or TVs can cause interference with the low-intensity radio waves in the key, or if there are strong radio waves nearby, such as from TV towers, airports, or power plants, the one-button start may experience a "failure" phenomenon. 2. The car key battery is dead. If the remote control distance shortens or the key becomes less responsive, these are signs that the car key battery is running low. In a dead battery state, the one-button start function will not work properly, and the battery should be replaced as soon as possible. 3. Vehicle malfunction. For example, in extreme cases such as fuel system issues, a dead battery, or short circuits in electronic components.
4
4
Share

How to deal with stickers on the car?

If your car has been stickered, it should be removed promptly. Here are some tips for sticker removal: 1. First, evenly apply adhesive remover on the sticker on the car window; 2. After applying the adhesive remover, let it sit for about twenty minutes to fully soften and dissolve the adhesive residue; 3. Use a plastic scraper to gently lift a part of the sticker from the edge; 4. Apply an appropriate amount of adhesive remover on the lifted edge of the sticker; 5. Peel off the entire sticker by hand; 6. Apply more adhesive remover on any remaining adhesive residue on the window; 7. After letting it sit for ten minutes, use the plastic scraper to clean off the remaining adhesive residue; 8. Finally, wipe the window with a cloth to completely remove the sticker.
4
1
Share

How to Turn Off the Daytime Running Lights on the 2020 Tiida?

Here are the steps to turn off the daytime running lights on the 2020 Tiida: 1. First, press the brake pedal to prepare for starting the engine. 2. Then, turn the key to start the engine. 3. The dashboard lights up, indicating that the vehicle's power is on. 4. Press the daytime running light switch once to turn them off. Below is some relevant information about daytime running lights: 1. Early versions of daytime running lights mostly used halogen bulbs, which consumed relatively little power. However, with advancements in technology, most manufacturers now use higher-brightness LED configurations for daytime running lights. 2. This can significantly reduce power consumption by up to 35%, extend battery life, and offer a lifespan of up to 8,000 hours, which is almost equivalent to the vehicle's usage period.
1
5
Share

Under What Circumstances Should Fog Lights Be Turned On?

Here is an introduction to the conditions for turning on fog lights: 1. According to traffic regulations, when visibility is between 100-200 meters, fog lights, low beams, width markers, and taillights must be turned on, the speed must not exceed 60 km/h, and the distance from the vehicle in front must be more than 100 meters. 2. When visibility is between 50-100 meters, fog lights, low beams, width markers, and taillights should be turned on, the speed must not exceed 40 km/h, and the distance from the vehicle in front should be more than 50 meters. Additionally, improper use of fog lights may result in a minimum fine of 50 yuan and a deduction of 1 point. 3. Under good visibility conditions, the use of fog lights is absolutely not allowed. This is because the red light from fog lights can cause real harm to human eyes when directly shining on them without the attenuation caused by obstacles such as fog, rain, or snow.
6
5
Share

What is the method to reset the maintenance light on the BYD Song?

BYD Song maintenance light reset method is: Turn the vehicle's ignition switch to the off position, then press the reset button on the instrument panel, adjust the ignition switch to on, wait for about 15 seconds, when the mileage value on the instrument panel resets it means the maintenance light reset is completed, then restart the vehicle. The BYD Song has a length, width, and height of 4600mm, 1830mm, and 1700mm respectively, with a wheelbase of 2660mm and a fuel tank capacity of 63 liters. In terms of power, this car is equipped with a 1.5T turbocharged engine, with a maximum power of 118kW and a maximum torque of 245Nm, matched with a 6-speed manual transmission.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.