How to Make a U-Turn at Traffic Lights Without Violating Traffic Rules?

2 Answers
MacLeila
07/29/25 12:10am
Car owners should first understand how to make a U-turn properly to avoid violations. The following introduces relevant regulations regarding illegal U-turns: 1. Situations where U-turns are prohibited: Motor vehicles are not allowed to make U-turns at locations with no U-turn or no left-turn signs/markings, railway crossings, pedestrian crosswalks, bridges, sharp curves, steep slopes, tunnels, or other hazardous road sections. 2. Permitted U-turn situations: U-turns are allowed at locations without no U-turn or no left-turn signs/markings, but must not obstruct the normal passage of other vehicles and pedestrians.
Was this review help?
8
4
Share
Esther
08/12/25 4:26am
That day I was driving through an intersection wanting to make a U-turn, so I specifically checked the traffic rules. The most important thing is to watch the traffic lights and signs! If there's a dedicated U-turn light, obediently wait for the green light; if there's no dedicated light, you can only make a U-turn when the left turn signal is green. Also, observe the road markings: double solid yellow lines absolutely prohibit U-turns, only dashed lines allow it. If there's a crosswalk within 50 meters of the intersection, you must go past the zebra crossing before turning, otherwise getting caught means 3 penalty points and a 200 yuan fine. Last time at a development zone intersection, I saw a driver making a U-turn over double solid yellow lines and got caught by a drone.
Was this review help?
3
5
Share
Expand All
More Forum Discussions

What Parameters Should Be Considered When Buying a Car?

When buying a car, consider the following parameters: 1. Wheelbase: Wheelbase is related to the car's length, but two cars with the same length may not necessarily have the same wheelbase. Generally, a longer wheelbase means more interior space, better comfort, and higher driving stability. 2. Maximum Engine Power: Maximum engine power is one of the engine's performance parameters. Higher power usually means better vehicle performance, but this isn't always accurate because another crucial parameter is engine RPM. As RPM increases, engine power also rises, but after a certain point, power starts to decline. 3. Maximum Engine Torque: Torque determines acceleration, while power determines top speed. 4. Fuel Consumption: Fuel consumption is very important for car owners.
7
3
Share

How long has the Phaeton been discontinued?

The Phaeton has been discontinued for about five years. The last model was the 2015 version, which was not produced in domestic factories but sold through imports. Relevant information about the Phaeton is as follows: 1. Dimensions: Width 1903mm, height 1475mm, wheelbase 3001mm, vehicle weight 2260kg. 2. Badge: The English name of the Phaeton is spelled: PHAETON, located below the badge on the trunk lid. 3. Configuration: The vehicle is equipped with a 3.0L naturally aspirated engine, a 3.6L naturally aspirated engine, and a 4.2L naturally aspirated engine.
11
1
Share

How to Turn On Bluetooth in a Chevrolet?

Chevrolet's in-car Bluetooth can be activated through the central control screen. Access the main interface menu on the central control screen, locate and select the phone option in the menu. Within the secondary menu of the phone settings, you will find the Bluetooth option. Simply click on it to turn it on. Relevant information about Bluetooth is as follows: 1. Introduction: Bluetooth technology is a global standard for wireless data and voice communication. It is based on low-cost, short-range wireless connections, providing a unique short-range wireless technology link to establish communication environments for both fixed and mobile devices. 2. Principle: Bluetooth is a wireless technology standard that enables short-range data exchange between fixed devices, mobile devices, and personal area networks (using UHF radio waves in the ISM band from 2.4 to 2.485 GHz). Bluetooth can connect multiple devices, overcoming the challenges of data synchronization.
9
1
Share

Is the Lavida's dual-clutch transmission dry-type?

Lavida's dual-clutch transmission is dry-type. Generally, only models equipped with 2.0-liter turbocharged engines in the Volkswagen lineup use wet-type dual-clutch transmissions. The Lavida measures 4670 mm in length, 1806 mm in width, and 1474 mm in height, with a wheelbase of 2688 mm and a fuel tank capacity of 51 liters. This car is powered by a 1.5L naturally aspirated engine, delivering a maximum power of 83 kW at 5000 rpm and a maximum torque of 250 Nm between 1750 and 3000 rpm. It is paired with a 7-speed dual-clutch transmission. The front suspension employs a MacPherson strut independent suspension, while the rear suspension uses a torsion beam non-independent suspension.
19
3
Share

What is the use of ETC Bluetooth mode?

The Bluetooth function of ETC can only be used when activating the ETC device or recharging the ETC. When using ETC on the highway, there is no need to turn on the car Bluetooth or mobile phone Bluetooth. The ETC junction box installed in our car has a short-range communication response system inside, which will automatically communicate with the sensors on the road, and our car and mobile phone do not need to turn on Bluetooth. ETC is the abbreviation of Electronic-Toll-Collection, which means electronic toll collection system. To apply for ETC, you need to provide the original and photocopy of the owner's valid ID card and driving license. If it is not the owner himself who handles it, you also need to bring the agent's valid ID card. The copy of the driving license needs to photocopy the page with the seal of the latest annual inspection; a bank card used to deduct highway tolls; aged 18 to 60; a car under personal name. The working principle of ETC: Through the on-board electronic tag installed on the windshield of the vehicle, it communicates with the microwave antenna in the ETC lane of the toll station, and uses computer networking technology to settle accounts with the bank in the background, so that the vehicle can pay the highway or bridge toll without stopping when passing through the highway or bridge toll station. Benefits of installing ETC: Save time: avoid the trouble of queuing and waiting; Green and environmental protection: green and low-carbon, vehicles pass through the toll station without stopping, which can reduce noise and exhaust emissions and pollution; Save loss: save costs, reduce the frequency of vehicle starting and braking, and reduce wear and fuel consumption; Improve efficiency: The traffic efficiency of ETC lanes can theoretically be increased by more than 2-3 times, making traditional ETC updated, faster and more high-tech. Compared with license plate payment, ETC technology is more mature and has more advantages.
10
1
Share

What Causes the Engine Malfunction Light to Flash Yellow?

When the engine malfunction light flashes, it indicates a fault in the engine, and the issue is relatively severe, requiring immediate inspection. The specific reasons may include the following seven: Sensor malfunction: The sensors referred to here include those for coolant temperature, crankshaft position, air flow, intake temperature, oxygen sensors, etc. When these sensors are damaged, have poor contact, or experience signal interruption, the vehicle's ECU cannot accurately obtain engine data, which will trigger the engine malfunction light. Fuel quality issues: If fuel and engine oil are not added according to the manufacturer's requirements, it may cause engine wear and trigger the malfunction light. Poor combustion of the air-fuel mixture: Poor combustion can lead to engine carbon deposits or knocking. When detected by the oxygen sensor and reported to the ECU, the malfunction light will illuminate as a warning. Issues such as spark plug failure, ignition coil failure, fuel pump failure, or fuel line blockage can all cause poor combustion of the air-fuel mixture. Turbocharging issues: The intake turbocharging pipeline and turbocharger can also trigger the engine malfunction light. The most common issue is turbocharger damage, accompanied by symptoms such as oil leakage, high oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake issues: If there is a problem with the vehicle's intake, it may lead to engine pipeline blockage, and in severe cases, trigger the engine malfunction light. A dirty or uncleaned air filter can cause intake problems. Exhaust issues: Exhaust faults can also trigger the engine malfunction light. Common causes include rear oxygen sensor failure, catalytic converter issues, exhaust camshaft and bearing faults, with the catalytic converter being the most frequent. Using leaded gasoline, lead or silicon-containing lubricant additives, physical damage to the catalytic converter, or fuel system faults can easily cause catalytic converter failure. Anti-theft system malfunction: If the vehicle's electronic anti-theft system fails or the anti-theft controller does not match the engine electronic controller, the anti-theft system can prevent the engine from operating normally, and the malfunction light will illuminate. Generally, the engine malfunction light can display four states: steady yellow, flashing yellow, steady red, and flashing red. The severity of the fault increases from steady to flashing and from yellow to red. In order of severity: flashing red > flashing yellow > steady red > steady yellow. If the engine malfunction light illuminates, follow these steps: First, check whether the engine is running normally and if there are issues such as shaking or black smoke. If so, avoid restarting the engine. Particularly, do not restart the engine if the red light is on. If the engine can be started, turn it off for 5-10 minutes, then press the start button without pressing the brake, or turn the key halfway to the 'on' position without pressing the clutch. The vehicle will perform a self-check after powering on. Observe whether the malfunction light turns off after 5-10 seconds. If the light remains on, visit a service center as soon as possible. The service center can use a portable diagnostic tool to read the fault code, identify the issue, and perform targeted repairs.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.