···
Log in / Register

How to Make a U-turn at an Intersection Ahead When Driving a Motor Vehicle?

4 Answers
SanJayla
09/08/2025, 02:52 AM

When there is a U-turn sign ahead, pay attention to the road markings. If there are dashed and solid lines indicating a one-way crossing is allowed, you can make a U-turn directly at the dashed line. If there are no dashed and solid lines, you need to make a U-turn when the traffic light is green. Additionally, you cannot cross the stop line when the signal is red, as making a U-turn at the dashed and solid lines is not controlled by the traffic signal.

Was this review help?
17
5
Share
VanReagan
09/20/2025, 01:21 AM

When making a U-turn at an intersection, I first slow down to observe the traffic conditions and ensure the traffic signal permits a U-turn—usually when the green light is on. I turn on the left turn signal to alert other drivers of my intention to turn. Then, I move into the left-turn lane or a dedicated lane, check that there are no oncoming vehicles or pedestrians crossing, and steadily turn the steering wheel to complete the U-turn. Some intersections have no U-turn signs, so never take the risk. I always remind myself not to rush during the last few seconds of a green light, as it can easily lead to accidents. Extra caution is needed during rain or at night, and turning on the headlights helps to see the surroundings better. With a few more practices, it becomes a habit, ensuring smooth and safe driving.

Was this review help?
14
3
Share
Expand All
KeiraRose
11/03/2025, 12:44 AM

Having driven for years, making U-turns depends on the specific intersection setup. When the light turns green, I shift to a lower gear and steadily approach the turning point, signaling my intention with the turn indicator. If there's heavy oncoming traffic, I patiently wait for a gap instead of forcing my way through. Some intersections have central zones designed for U-turns, allowing me to use that space to turn slowly. The key is to stay focused and pay full attention to road conditions. I always make a habit of observing different intersection markings, like arrow signals or no-U-turn signs. Simply put, go with the flow, prioritize safety, and avoid making passengers carsick.

Was this review help?
18
4
Share
Expand All
StPeyton
12/17/2025, 12:44 AM

Safety first when making a U-turn. Check if the signal is green, use your turn signal, and observe pedestrian movements and oncoming traffic. Avoid sharp curves where you might get stuck or scrape. Slow down at narrow intersections and ensure no obstructions before turning the wheel. I recommend beginners practice in open intersections to get familiar with the vehicle's turning radius. Also, consider weather conditions—use fog lights in foggy weather for better visibility. Remember, avoid distractions like music and stay focused on driving. Following these simple steps builds cautious habits and reduces accident risks.

Was this review help?
13
0
Share
Expand All
More Forum Discussions

What is the gauge next to the fuel gauge in a car?

The gauge displaying C and H next to the fuel gauge is the coolant temperature gauge. Structure of the coolant temperature gauge: Its sensor is a thermistor-type sensor, fixed with threads on the engine cooling water passage. The thermistor determines the current flowing through the coil winding of the temperature gauge, thereby driving the pointer to swing. Introduction to the coolant temperature gauge: The coolant temperature gauge displays the temperature of the cooling water, measured in ℃ (Celsius). In the past, tap water was used as the cooling water for car engines, but now many car engine cooling systems use specialized coolant, hence it is also called the coolant temperature gauge. Some coolant temperature gauges use indicator lights; when the coolant temperature light is on, it indicates that the temperature is too high.
17
0
Share

Can Engine Oil Catch Fire?

Under normal circumstances, engine oil will not catch fire when exposed to an open flame if there are no attached substances. Here are the detailed explanations: 1. Engine oil itself is flammable. If combined with other flammable substances, it can easily ignite. Therefore, for safety reasons, it is best to avoid exposing engine oil to open flames. 2. The boiling point of engine oil is generally around 150°C, and the flash point should be 20-30°C higher than the operating temperature of the oil. The choice should be based on the oil's working temperature, as not all vehicle models operate under the same conditions. 3. For oils with the same viscosity, a higher flash point indicates lower volatility, meaning the oil is less likely to catch fire even at higher temperatures. Conversely, if the flash point is too low, it could pose a potential safety hazard.
11
1
Share

What Causes Brake Noise in Winter?

Possible reasons for brake noise in winter are as follows: 1. The car is new. Since the brake pads and brake discs are still in the break-in period, squeaking or other abnormal noises may occur during braking. This is a normal phenomenon and can be ignored; it usually disappears automatically after driving a few hundred kilometers. 2. Water in the brake discs on rainy days. In wet conditions, the brake pads and discs are damp, making it easier for noise to occur during low-speed braking. The noise will stop once the moisture dries up. 3. Rust on the brake discs or pads. If the car has been unused for too long, dust or rust may accumulate on the brake discs and pads, leading to abnormal noise during braking. This is also normal. 4. Worn-out brake pads needing replacement. If the brake noise persists for several days and becomes louder and more frequent, it may indicate that the brake pads need to be replaced.
19
2
Share

What is the horsepower of the Mercedes-Benz GLS?

The horsepower of the Mercedes-Benz GLS is 367 PS. The entire GLS lineup is equipped with a 3.0-liter turbocharged engine, delivering a maximum torque of 500 Nm. The engine reaches its peak power at 6,400 rpm, while the maximum torque is available between 1,600 and 4,500 rpm. It is paired with a 9-speed automatic transmission (9AT). Below are some relevant details: 1. The Mercedes-Benz GLS is a crossover SUV from Mercedes-Benz, with body dimensions of 5,214 mm in length, 1,956 mm in width, and 1,823 mm in height, and a wheelbase of 3,135 mm, offering a spacious interior. 2. In terms of appearance, the Mercedes-Benz GLS features AMG styling, giving it a very sporty look. Its overall proportions remain largely unchanged, maintaining its robust and imposing style.
9
3
Share

Is the car fuel pump covered under the three-guarantee policy?

Car fuel pumps are covered under the three-guarantee policy. Function of fuel pump: The fuel pump's function is to draw gasoline from the fuel tank and deliver it through pipelines and fuel filters to the float chamber of the carburetor, providing the car engine with the power needed to start and operate the vehicle. It is precisely because of the fuel pump that the gasoline tank can be placed at the rear of the car, away from the engine and below it. Purpose of fuel pump: The purpose of the fuel pump is to supply the required fuel to various fuel injectors and cold-start injectors. In electronically controlled fuel injection systems, there are generally two types of electric fuel pumps used: roller-type electric fuel pumps and vane-type electric fuel pumps. The roller-type electric fuel pump has an inlet on one end of the pump housing and an outlet on the other. The roller pump on the inlet side is driven at high speed by a drive motor located in the middle of the pump housing. The rotor is eccentrically installed inside the pump body, with rollers placed in the grooves of the rotor.
20
1
Share

How to Open the Hood of an Older Model Ford Focus?

Rotate the Ford emblem on the front of the car counterclockwise by 90 degrees, insert the key into the knob, and simultaneously lift the hood with your right hand. The following are the functions of the hood: 1. The vehicle's exterior design is a visual representation of its value, and the hood, as a crucial component of the overall appearance, plays a vital role in enhancing aesthetics and embodying the concept of the entire car. 2. The engine operates in a high-temperature, high-pressure, and flammable environment, where accidents such as explosions, fires, or leaks may occur due to overheating or unexpected damage to original parts. The hood can effectively block damage caused by explosions and serve as a protective cover. It effectively blocks air, prevents the spread of flames, and reduces the risk and extent of fire damage. 3. It protects the engine and surrounding pipeline accessories. Beneath the hood lie essential components of the car, including the engine, electrical circuits, oil circuits, braking system, and transmission system, all of which are critical to the vehicle. By improving the strength and construction of the hood, adverse effects such as impacts, corrosion, rain, and electrical interference can be effectively prevented, ensuring the normal operation of the vehicle.
12
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.