How to Make a Right Turn?

Can lane changing be performed on triple dashed lines?

Dashed lines allow lane changing. Here is the relevant information: 1. Specific requirements: It is not allowed to cross solid white lines to change lanes into the main lane. At white dashed lines ahead, lane changing across the line is permitted only when safety is ensured. Violations incur a fine of 200 yuan and 3 penalty points. At some highway exits where solid white lines are present, crossing them to change lanes into the auxiliary lane to exit the highway is prohibited. Lane changes to exit the highway must be made in advance at white dashed lines. 2. White dashed lines: When painted on road sections, they are used to separate traffic flows in the same direction or serve as safe driving distance markers; when painted at intersections, they guide vehicle movement.

10

4

Share

What Does Three-Year Value Retention Buyback Mean?

It refers to the option to repurchase the car at the used car market price after three years or at a pre-agreed discounted rate, ensuring a minimum value retention for the vehicle. Below is relevant information: 1. Value Retention: Value retention refers to the foreign exchange traders' practice of using spot and forward foreign exchange transactions to hedge against or eliminate exchange rate fluctuation risks. 2. Automobile: According to the latest national standard "Terms and Definitions of Types of Motor Vehicles and Trailers" in China, an automobile is defined as a non-track vehicle powered by an engine, with four or more wheels, primarily used for: transporting people and/or goods; towing vehicles carrying people and/or goods; and for special purposes.

14

1

Share

What does 0-100 acceleration refer to?

0-100 km/h acceleration refers to the time it takes for a car to accelerate from 0 to 100 kilometers per hour, which is the most intuitive reflection of a car's power. Among vehicles with the same displacement, models equipped with turbocharged engines have obvious advantages in the 0-100 km/h acceleration test because they output more power, and their maximum torque output range is very wide, allowing the vehicle to maximize acceleration at very low speeds. Here is some relevant information: 1. Relevant information: Manufacturers usually indicate the official 0-100 km/h acceleration time in the vehicle's promotional materials, but the results obtained in actual tests will differ from the official figures. Different environmental temperatures, road conditions, vehicle wear conditions, and even the amount of fuel remaining in the tank will affect the test results, so there are no two identical acceleration test results. 2. Extended information: Moreover, the "gold content" of the 0-100 km/h acceleration results marked by different manufacturers varies, so the reference value is somewhat different. Generally, the 0-100 km/h acceleration time of a 1.6L compact car is between 11 and 13 seconds, that of a 2.0T mid-size car is between 7 and 8 seconds, and that of a supercar is mostly less than 3.8 seconds.

18

4

Share

What is the difference between 15w-40 and 20w-50?

Here are the differences between 15w-40 and 20w-50: 1. Different properties: For the 20w50 specification, 20 represents the minimum applicable temperature of the oil at -15 degrees Celsius, while the 15 in 15w-40 represents the minimum applicable temperature of the oil at -10 degrees Celsius. 2. Different viscosity: 20w50 oil belongs to multi-grade viscosity oil, while 15w-40 does not. 3. Different values: The W in the label represents Winter, and the number before it indicates the low-temperature fluidity of the oil. The smaller the number, the better the low-temperature fluidity. The number after W represents the viscosity grade of the oil at 100°C. The larger this number, the better the protection the oil provides to the engine at high temperatures.

17

1

Share

What is the plastic shell under the front of the car called?

The plastic shell under the front of the car is called the plastic bumper. Below are the specific details about the bumper: 1. Composition: The front and rear bumpers of a car are made of plastic. Generally, the plastic bumper of a car consists of three parts: the outer panel, the buffer material, and the crossbeam. The outer panel and buffer material are made of plastic, while the crossbeam is formed by stamping cold-rolled thin sheets into a U-shaped channel; the outer panel and buffer material are attached to the crossbeam. 2. Function: The car bumper is a safety device that absorbs and mitigates external impacts, protecting the front and rear parts of the car body. In addition to maintaining its original protective function, it also pursues harmony and unity with the car body design and strives for lightweight itself.

3

4

Share

What Are the Causes of Intermittent Brake Failure?

During daily driving, a lack of awareness about brake system maintenance may lead to temporary brake failure due to excessive impurities in the brake master cylinder or poor sealing. Additionally, vacuum booster pump failure or excessively dirty brake fluid can result in poor braking performance. Furthermore, oil leakage from the brake master cylinder or wheel cylinders during driving can also cause temporary brake system failure. Below is relevant information: 1. Brake Pads: Brake pads are components that require frequent replacement during daily driving. Generally, they should be replaced every 30,000 kilometers, although this is not a fixed mileage. The replacement interval depends on the driver's habits and driving conditions. Frequent overtaking or heavy brake usage can shorten the replacement cycle. Drivers should regularly inspect their brake pads and replace them promptly if abnormal wear is detected. 2. Brake Discs: Brake discs have a relatively long service life. Many well-maintained vehicles may not require brake disc replacement, but proper maintenance methods are essential. For instance, after high-speed driving, the brake discs will be in a high-temperature state, and washing the car immediately should be avoided, as this can shorten the lifespan of the brake discs or even render them unusable.

15

5

Share

How to Make a Right Turn?

Can lane changing be performed on triple dashed lines?

What Does Three-Year Value Retention Buyback Mean?

What does 0-100 acceleration refer to?

What is the difference between 15w-40 and 20w-50?

What is the plastic shell under the front of the car called?

What Are the Causes of Intermittent Brake Failure?

Should You Press the Brake Once or Continuously?

What is the emission standard for 2009 cars?

What are the criteria for obtaining a blue license plate?

What Causes the Abnormal Noise in the Rear Wheels When Braking?