How to Make a Left Turn at a T-Junction?

1 Answers
AndersonDella
07/29/25 10:08am
At a T-junction, make a turn according to the traffic signal. You must slow down when passing through the intersection, first observe the oncoming traffic from the left front, then observe the oncoming traffic from the right front. Before making a left turn, check the rearview mirror to confirm safety before turning. Below are specific instructions on how to make a left turn at a T-junction: 1. With traffic lights: If there are traffic lights at the T-junction, you must drive according to the red light. When the light is red, vehicles must wait behind the stop line. 2. With pedestrian crossings: At a T-junction with pedestrian crossing lights, motor vehicles should drive according to the pedestrian crossing lights. When the light is red, passing through the T-junction is not allowed. If a vehicle runs a red light at a T-junction, it is very dangerous. Not only does it hinder normal vehicle turns, but it also faces a penalty of 6 points deducted and a fine of 200 yuan.
Was this review help?
8
0
Share
More Forum Discussions

How to Adjust the Dashboard Clock on Chery Tiggo 3x?

Turn the key to the ACC position or remove it, and the dashboard will turn off. Rotate the light switch to turn on the parking lights. At this point, the dashboard backlight will also illuminate. Press and hold the dashboard button for a while, and the hour section of the clock on the dashboard will start flashing. Release the button and press it again; each press increases the hour by one. After adjusting the hour, if no button is pressed, the hour will blink five times and then automatically switch to the minute adjustment. Each press of the button increases the minute by one, and holding the button down will continuously increase the minutes.
6
0
Share

How many differential locks does the Pajero V73 have?

The Pajero V73 has 1 differential lock, which can be activated via a dedicated button. Function of automotive differential lock: The purpose of a differential lock is to enhance a vehicle's off-road capability on rough terrain. When one driving axle loses traction, the differential lock quickly locks the differential, turning both axles into a rigid connection. This allows most of the torque to be transferred to the non-slipping axle, fully utilizing its traction to generate sufficient driving force and enabling the vehicle to continue moving. Types of differential locks: High-friction self-locking types (including friction plate type and sliding cam type), forced locking type (a differential lock installed on ordinary symmetrical bevel gear differentials), and viscous coupling type (used as differentials in some four-wheel-drive vehicles with viscous coupling shafts).
11
5
Share

What Causes Normal Idle Water Temperature to Rise When Driving?

The reasons for normal idle water temperature rising when driving: 1. Insufficient coolant: Coolant leakage or low coolant level can cause the engine water temperature to rise. If the level is low, first top it up to the appropriate level, then check after a few days to see if the level has dropped significantly. If it has, locate the source of the leak. 2. Faulty radiator fan: When the vehicle is running at high speed, the heat generated cannot be transferred to the coolant in time, affecting heat dissipation. This leads to an increase in coolant temperature, potentially causing overheating. 3. Faulty water pump: Water pump issues include seized bearings and damaged impellers. Seized bearings are relatively rare, while impeller damage, such as cracks or detachment from the pump shaft, is more common. This slows down the coolant circulation, making it easier for the engine to overheat.
17
0
Share

Why is there no warm air blowing from the van?

There are several main reasons why the vehicle's warm air is not heating up: 1. Hot water is not reaching the heater core. This includes clogged heater hoses or a faulty heater valve. For such issues, you can simply check by touching the two heater hoses entering the cabin in the engine compartment. If one is hot and the other is cold, it indicates a problem with the heater core or the heater hose system. 2. Warm air is not being delivered to the vents. This could be due to a clogged cabin air filter, a stuck heater air flap, a disconnected control cable, or a faulty control motor. 3. The blower fan is delivering insufficient airflow. For this issue, you need to inspect whether the cabin air filter is dirty or clogged, or if the blower fan is not providing enough airflow. If these are not the problems, then the issue might be with the control of the air duct flaps.
15
1
Share

What Causes Insufficient Brightness of Headlights?

Excluding the possibility of an aging battery, it may also be related to the headlight cover. The details are as follows: 1. Water vapor: If the owner replaces the bulb with a brighter one, it may affect the headlight cover, as a brighter bulb generates more heat. If the seal is not tight and water enters, the resulting water vapor will adhere to the inside of the headlight cover. After being exposed to high temperatures, the water vapor will evaporate completely onto the cover, making it appear yellow. 2. Automotive lighting: The water vapor produced will adhere to the inside of the headlight cover and, after high-temperature baking, will evaporate completely onto the cover, making it appear yellow and less bright. Automotive lighting can be divided into two categories based on purpose: illumination and auxiliary. Among these, only the headlights and some fog lights equipped on certain vehicles serve an illumination function, while the rest are auxiliary lights.
19
0
Share

Can the Corolla Hybrid run on highways?

Toyota Corolla Hybrid has no problem running on highways, although it is not very powerful in terms of performance, but it is not too bad either. Highway fuel consumption of Corolla: The highway fuel consumption of Toyota Corolla Hybrid can basically be maintained at about 4.2 liters per 100 kilometers, which is a very obvious fuel-saving performance. The highway fuel consumption of the non-hybrid version is generally 4.9-5.4 liters, which is the advantage of hybrid power, with higher fuel economy. Highway driving precautions: Do not change lanes casually. When driving on the highway, you must abide by traffic rules and drive correctly according to the lane of the vehicle. In addition, when changing lanes, you must observe the road conditions, turn on the turn signal in advance, choose the correct road, and only change lanes after ensuring safety, and you cannot change more than two lanes at a time.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.