How to Maintain the Air Filter?

Can the horn be pressed randomly during Subject 3 test?

It is allowed as long as it is not in a no-honking zone. Here are the relevant regulations: Horn volume: When using the horn in non-prohibited areas and sections, the volume must be controlled within 105 decibels, each press should not exceed 0.5 seconds, and continuous presses should not exceed 3 times. The horn should not be used to call people or knock on doors. The distance (generally 50~100 meters) and frequency of honking should be appropriate and reasonable, and the horn should not be used as a command. The horn should be used when starting or overtaking. Starting requirements: Before starting, check whether the doors are completely closed, adjust the seat and mirrors, fasten the seat belt, check the parking brake and gear, and start the engine. Check the instruments, observe the interior and exterior mirrors, turn the head to observe the traffic behind, turn on the turn signal, engage the gear, release the parking brake, and start. The starting process should be smooth, without jerking, rolling back, or stalling. Therefore, generally, there is no need to honk when starting, but the horn can be used reasonably when encountering complex road traffic conditions.

3

Share

Is it troublesome to transfer to another location after passing Subject 1?

It is not troublesome to transfer to another location after passing Subject 1. Here are the details: One-Certificate Nationwide Exam: You must pass Subject 1 before transferring your records to another location. Only after passing one subject will the vehicle management office have your file. Starting from June 1, 2016, the nationwide "One-Certificate Nationwide Exam" policy for small vehicle driver's licenses was implemented. Applicants can apply for a driver's license directly at any location nationwide using their resident ID card. Additionally, small vehicle driver's license exams can be taken in different locations for different subjects, and there is no need for a health check or residence permit registration certificate. Introduction: The driver's exam is a qualification test organized by the vehicle management office of the public security bureau. Only by passing the driver's exam can one obtain a driver's license and legally operate a motor vehicle. Content: The motor vehicle driver's exam consists of the following subjects: the road traffic safety laws, regulations, and related knowledge exam (also known as the "theoretical exam," referred to as "Subject 1"), the field driving skills exam (commonly known as the "parking test," referred to as "Subject 2"), and the road driving skills and safe, civilized driving knowledge exam (commonly known as the "road test," referred to as "Subject 3"). The exam content and passing standards are uniform nationwide, with corresponding exam items specified for different types of vehicles.

8

3

Share

What is the tire pressure for the Nissan Qashqai?

The normal tire pressure for the Nissan Qashqai ranges between 2.4 and 2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. This data complies with the international GBT2978-2008 standard. In the new Nissan Qashqai, the tire pressure can be viewed on the dashboard display. Press the menu button on the left side of the steering wheel to switch to the tire pressure page, but it requires a period of normal driving before the tire pressure is displayed. Generally, a tire pressure above 2.8 bar is considered too high, while a pressure below 2.0 bar is too low. Hazards of overinflated tires: Reduced friction and adhesion of the tires, affecting braking performance; causes steering wheel vibration and deviation, lowering driving comfort; accelerates uneven wear on the central tread pattern, reducing tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overstretches the tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement in various parts of the tire, causing abnormal heat due to excessive rolling; weakens the function of cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, damaging the tire bead and causing abnormal wear; multiplies friction between the tire and the ground, sharply raising tire temperature, softening the tire, and drastically reducing strength. High-speed driving may result in a tire blowout. If the tire pressure monitoring indicator lights up (a yellow symbol with an irregular circle, no stamp on top, four small spikes below, and an exclamation mark inside), it is generally due to one of the following three reasons: Abnormal tire pressure: Typically, an alarm is triggered if the pressure is below 1.8 bar or above 3.0 bar. In this case, the tire should be checked and the pressure adjusted. Tire pressure monitoring not reset: After inflating the tire, if the tire pressure is not reset in time, the system will still record the previous data, causing the indicator to light up. Simply reset the tire pressure to resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, installed inside the tire and connected to the inflation valve, monitors tire pressure. If the sensor is damaged due to impact while driving, the tire pressure warning light will illuminate. For sensor damage, the only solution is to replace it with a new part.

14

4

Share

How to Connect the Ground Wire of a Car?

Wires connected to the metal body of a car can generally be referred to as ground wires. These include the main ground wire between the battery and the car body, the ground wire between the engine and the body or battery, the CPU ground wire, and the dashboard ground wire. Below are the methods for connecting ground wires: 1. Main Ground Wire Between the Battery and the Car Body: This is a thick power ground wire, usually connected to the car's frame. This wire carries the current from various parts of the car. If one end of this wire is connected to the battery terminal and the other end is connected to the car frame (sometimes via a master switch, though some cars do not have this switch), poor contact can occur due to corrosion or sulfation of the battery terminal. Poor grounding acts like adding a large resistor to the car's circuit, which can make the engine hard to start, cause dim lights, or even prevent the engine from starting, leaving the entire car without power. The connection point on the body is also prone to rust and loose bolts, leading to poor contact and the aforementioned issues. When suspecting poor grounding due to insufficient power, checking this wire first often yields quick results. 2. Ground Wire Between the Engine and the Body or Battery: The engine is the heart of the car and the most critical and concentrated area for electrical components, including the alternator, starter, ignition system, fuel supply system, and various sensors. The engine is not directly connected to the metal body; it is mounted on rubber pads to reduce vibration. Poor engine grounding can prevent the starter from working, the alternator from generating electricity, or the sensors from providing accurate signals. Weak spark plug sparks can directly affect engine performance. In severe cases, poor grounding can cause electrical sparks between moving parts inside the engine due to delayed current return, potentially burning components and causing significant damage. Engine grounding must not be overlooked. 3. CPU Ground Wire: Modern cars mostly use electronic fuel injection systems, and carburetor-type cars are gradually being phased out. Even high-end diesel vehicles now come equipped with a central control CPU, such as Sinotruk's HOWO. The CPU is the electronic heart of the car, receiving and processing various signals to issue commands to actuators. However, poor or broken CPU ground wires can cause signal errors, leading to abnormal car operation or even partial burnout of the CPU module, resulting in significant losses. The CPU has dedicated ground wires connected to the body, which can suffer from loose plugs or rusted contact points. These ground wires must not be ignored. 4. Dashboard Ground Wire: Modern car dashboards are highly integrated and play a crucial role in displaying the car's status. The precision resistors inside the dashboard instruments are carefully calculated by designers. Faulty dashboard ground wires can lead to inaccurate readings or false alarms. These ground wires must also not be overlooked.

16

3

Share

Which foot controls the accelerator and which controls the brake?

Both the brake and accelerator are controlled by the right foot. The brake pedal is on the left side, and the accelerator pedal is on the right. Both are operated by the right foot. In manual transmission vehicles, there are three pedals from left to right: clutch pedal, brake pedal, and accelerator pedal. Automatic transmission vehicles have only two pedals: brake pedal and accelerator pedal. This means manual cars require both feet to operate, while automatic cars only need the right foot. The brake system, also known as the braking system, is a mechanical device that slows down the vehicle and is one of the important components of a car. Braking is achieved through intense friction between the brake pads and brake drum. Braking performance significantly decreases in water, so maintaining distance and braking early is crucial when driving in rainy conditions. During long drives, both feet can become very tired and may unconsciously press down. If the left foot is on the brake pedal at this time and presses it, it can easily cause accidents and danger. Most people have more agile right feet with faster reaction times. In case of emergencies, the right foot can quickly respond by lifting off the accelerator and pressing the brake pedal. Typically, the brake pedal and accelerator pedal are not at the same height to prevent accidentally pressing the accelerator when intending to brake. In automatic cars, the brake pedal is slightly higher than the accelerator pedal, and the brake pedal is wider while the accelerator is narrower. This design helps drivers react quickly. The correct operation method is to pivot the right heel and use the sole to press the brake or accelerator. Whether it's an automatic or manual car, sudden braking during daily driving is not recommended as it harms tire wear and affects the transmission system, potentially putting the vehicle in a passive or out-of-control state. More information about car brakes and accelerators: The brake is a mechanical braking device that slows down the vehicle, also known as a decelerator. The car brake pedal is located under the steering wheel. Pressing it activates the brake lever, which transmits pressure to the brake pads on the brake drum, clamping the brake disc to slow or stop the car. The accelerator is a device on internal combustion engines that controls fuel supply. In cars, the engine's accelerator is usually controlled by a pedal, also called the throttle, which regulates fuel supply to the engine. When pressing the brake or accelerator, the body needs support to maintain balance. While the right foot operates the pedal, the left foot can stabilize the body on the floor. If both feet are placed on the brake and accelerator, they remain semi-suspended without a stable support point, making it easy to press the pedals unsteadily. In emergencies, if both feet are on the brake and accelerator, misjudgment may occur, such as pressing the accelerator instead of the brake. Assigning both pedals to one foot greatly reduces this possibility and lowers the vehicle's skid coefficient when braking while accidentally pressing the accelerator. If the brake in an automatic car were placed where the clutch is in manual cars, with the right foot on the accelerator and left foot on the brake, safety would improve.

19

2

Share

Where is the engine number located on the Mazda6?

The engine number of the Mazda6 is located on the engine block, while the chassis number is positioned below the left side of the windshield. Additional information about the vehicle's engine number is as follows: 1. Both the engine number and chassis number serve as identification codes that help car owners understand their vehicles, hence they are typically placed in highly visible locations. 2. The fourth digit of the engine number identification represents information about the vehicle's chassis series.

4

1

Share

How to Maintain the Air Filter?

Can the horn be pressed randomly during Subject 3 test?

Is it troublesome to transfer to another location after passing Subject 1?

What is the tire pressure for the Nissan Qashqai?

How to Connect the Ground Wire of a Car?

Which foot controls the accelerator and which controls the brake?

Where is the engine number located on the Mazda6?

What Should You Pay Attention to When Driving a New Car?

How Often Should Electric Vehicles Be Serviced?

Can a new key be made if the electric car key is lost without a spare?

Adjustment Method for Clutch Free Play