How to Maintain Car Tires?

2 Answers
JasperMarie
07/24/25 12:38am
Tire maintenance methods are as follows: 1. Regularly clean stones from tire treads to extend tire lifespan. 2. Avoid prolonged exposure to sunlight, as it can shorten tire life and cause cracking. 3. Tire pressure directly affects tire lifespan. Regularly check tire pressure and inflate according to the manufacturer's specifications—neither too high nor too low. 4. Pay attention to suspension maintenance, as it significantly impacts tire longevity. 5. Purchase daily tire care products and perform regular tire maintenance. 6. In hot weather, never release air to reduce pressure or splash water to cool down. 7. Try to avoid sudden braking and overly aggressive acceleration.
Was this review help?
17
4
Share
DeCody
08/10/25 8:24pm
I've been driving for twenty years, and tire maintenance is a fundamental skill. First and foremost, regularly checking tire pressure is crucial; measure it monthly using a home tire pressure gauge or get it checked at a shop, maintaining the recommended value. Too high pressure accelerates center wear and increases the risk of a blowout, while too low pressure wastes fuel and damages the rims. Tread depth should also be monitored—insert a coin into the tread; if the exposed part exceeds the mark, it indicates the tread is too shallow, and new tires are needed. Otherwise, hydroplaning in the rain and longer braking distances become dangerous. Don’t overlook tire balancing and alignment; get them done every 10,000 kilometers. Imbalance can cause vibrations and uneven wear. Driving habits matter too—avoid sudden braking, sharp turns, speeding, and overloading, as these shorten tire lifespan. When storing spare tires, keep them in a cool, dry place away from direct sunlight to prevent rubber aging. Clean tires with plain water to rinse off dust, avoiding strong acidic or alkaline cleaners that can corrode the surface. These small habits combined can extend tire life by two to three years and make driving more stable.
Was this review help?
15
5
Share
Expand All
More Forum Discussions

What are the engine specifications of the A4L?

A4L engine specifications: The 1.4T engine of the A4L has a maximum power of 110 kW and a maximum torque of 250 Nm; the low-power 2.0T engine has a maximum power of 110 kW and a maximum torque of 270 Nm; the medium-power 2.0T engine has a maximum power of 140 kW and a maximum torque of 320 Nm; the high-power 2.0T engine has a maximum power of 185 kW and a maximum torque of 370 Nm. The four-wheel-drive version of the Audi A4L is equipped with an on-demand all-wheel-drive system, and both the front and rear suspensions of this car use a five-link independent suspension. The dimensions of the Audi A4 are 4763mm in length, 1826mm in width, and 1426mm in height, with a wheelbase of 2869mm.
19
5
Share

What is the displacement of Audi 55tfsi?

Audi 55tfsi has a displacement of 3.0 liters. All Audi models with the 55tfsi designation are equipped with a 3.0-liter turbocharged engine. This engine delivers a maximum power of 250 kilowatts and a maximum torque of 500 Newton-meters. The engine can output its maximum torque starting from 1,370 rpm and maintains it up to 4,500 rpm. The domestic version of the Audi A6L includes a 55tfsi model. The 3.0T engine in the Audi A6L features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 7-speed dual-clutch transmission. Models equipped with the 3.0T engine are four-wheel drive. The four-wheel-drive version of the Audi A6L comes with an on-demand all-wheel-drive system and uses a multi-plate clutch-type center differential.
6
1
Share

What is the length of the Odyssey?

The length of the Odyssey is 4847 mm. The Odyssey is an MPV produced by GAC Honda, with body dimensions of 4847mm in length, 1820mm in width, and 1702mm in height, and a wheelbase of 2900mm. The Odyssey is equipped with a CVT continuously variable transmission across all models, and features front-wheel drive. In terms of suspension, the Odyssey has a MacPherson strut front suspension and a torsion beam rear suspension. The Odyssey comes with a satellite navigation system, an 8-inch large display screen, and voice guidance functionality, powered by a high-performance 2.4L i-VTEC engine with variable valve timing and lift. The air intakes on both sides below the front bumper of the Odyssey also adopt a new design, offering a more striking visual effect, and the headlight covers are changed to a light blue color, highlighting the identity of the hybrid model.
6
5
Share

Where is the engine number of Audi A4 located?

Audi A4's engine number is located at the rear end of the engine, near the connection point between the engine and the transmission. The dimensions of the Audi A4 are 4763mm in length, 1826mm in width, and 1426mm in height, with a wheelbase of 2869mm. The Audi A4 has abandoned the teardrop headlight design, added quattro all-wheel drive mode, and features a more stylish and sporty exterior, along with outstanding power and handling. The Audi A4 inherits Audi's tradition of emphasizing safety, with multiple standard safety equipment creating an ideal safety environment for passengers, meeting various international passive safety standards. The side head protection airbags cover almost the entire side from the A-pillar to the rear of the cabin. The new intelligent collision sensor designed for the front airbags can detect the severity of an accident, ensuring the airbags deploy in a timely manner.
14
4
Share

Which model is the entry-level Mercedes-Benz C-Class?

Currently, the most entry-level model among domestically produced Mercedes-Benz vehicles is the Mercedes-Benz C180K Classic. Engine performance of this model: 1.6L supercharged engine with a maximum power output of 115 kW and peak torque of 230 N·m, achieving 0-100 km/h acceleration in 9.1 seconds. Vehicle features: Equipped with Mercedes-Benz's latest cutting-edge technologies, including the latest AGILITY CONTROL suspension system (with automatic adjustment capability based on road conditions) and the new-generation PRE-SAFE preventive safety system also featured in S-Class and E-Class sedans.
9
2
Share

What does 'rear' mean in BMW 3 Series?

BMW 3 Series rear light is the switch for the rear reading light. If it stays on, it indicates that the reading light is activated or there is a malfunction with the reading light. Introduction to reading light: The reading light provides sufficient brightness for passengers when the interior light is insufficient, facilitating reading inside the car without affecting the driver's normal driving. Interior lighting: Includes instrument lights, ambient lights, and dome lights. Most of these lights have two types of switches: one is a manual switch, with the button usually located next to the light, allowing direct pressing to turn the light on or off; the other is an automatic switch.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.