How to Maintain an Audi A6L?

1 Answers
DeKylie
07/24/25 8:08am
Audi A6L's first maintenance for a new car is recommended at 5,000 kilometers, followed by maintenance every 7,500 kilometers. Below is an introduction to the Audi A6L: 1. Overview: The Audi A6L is the first Audi model introduced to the Chinese market, with its predecessor being the third-generation Audi 100 (code-named C3) introduced in 1988. The Audi A6L is a vehicle series developed by FAW-Volkswagen Audi based on the German new A6, serving as the successor to the A6. In June 2012, the new-generation Audi A6L was launched, equipped with a 35-TFSI powertrain, and its exterior design somewhat resembles the new version of the A4L. 2. Design: The new Audi A6L features a five-link front suspension design, balancing the necessary rigid connection for sportiness and comfort with low static stiffness. Among these, the hydraulic frame damping support significantly enhances driving comfort and effectively reduces the impact and jolt when passing over speed bumps and uneven roads, thereby minimizing the impact on the lumbar spine.
Was this review help?
9
4
Share
More Forum Discussions

Can a replaced car trunk be detected?

Specific observations can be made from the following aspects: 1. Color difference: If the trunk has been replaced, there may be a certain color difference between it and the body. It's quite simple—compare the color of the trunk with the nearby ABC pillars. If the difference is too significant, there's likely an issue. There's no need to compare it with the entire body. 2. Fit: Sometimes, even after replacing these parts, they may still fit perfectly. 3. Car windows: In more severe accidents, the car windows may have cracked or at least been damaged, requiring replacement. Therefore, clues can also be found through the car windows. However, this is not 100% accurate, as sometimes replacing the trunk may not involve replacing the windows.
17
3
Share

What is the status of ETC activation?

The status of ETC activation is a successful connection, and the bound electronic device will receive an SMS notification. This allows the vehicle to use the ETC-exclusive lanes when entering and exiting highways without the need to stop for toll payment. The ETC system requires the use of a rechargeable card, which must be inserted when using the system. If the ETC system is not needed, the card can be removed. ETC, which stands for Electronic Toll Collection, is a specialized road tolling method typically used on highways, toll bridges or tunnels, and certain urban road sections to alleviate traffic congestion. ETC works through dedicated short-range microwave communication between the onboard electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at toll stations. It utilizes computer networking technology to process backend settlements with banks, enabling vehicles to pass through toll stations without stopping to pay tolls.
3
2
Share

What does it mean when the car displays 'nokey'?

When the car dashboard displays 'nokey', it could be due to the following situations: 1. Low battery in the key. 2. Interference from in-car devices: Heads-up display, navigation, tire pressure monitoring, etc., these devices may interfere with the sensor receiving signals from the key. 3. Sensor malfunction: There are key sensors located in the vehicle's dashboard, under the center console, and under the rear seats, etc. If these sensors malfunction or the connectors become loose, the vehicle may fail to detect the key. 4. Low vehicle battery: If the vehicle's battery is low, it cannot power the vehicle's electrical devices, and naturally, it won't be able to detect the remote key.
16
2
Share

Does Not Pressing the Unlock Button While Shifting Gears in a BMW Damage the Car?

Not pressing the unlock button while shifting gears in a BMW does not damage the car. Below is an introduction to the BMW X3: 1. Powertrain: The BMW X3 is equipped with a 2.0T turbocharged engine. BMW offers three powertrain variants for the X3, all featuring the 2.0T turbocharged engine but with different power outputs: 25i, 28i, and 30i. 2. Engine Specifications: The 25i model's engine delivers a maximum power of 135 kW and a maximum torque of 290 Nm. The 28i model's engine produces a maximum power of 165 kW and a maximum torque of 310 Nm. The 30i model's engine generates a maximum power of 185 kW and a maximum torque of 350 Nm.
2
5
Share

Where is the rearview mirror heating switch on the Envision?

The rearview mirror heating button on the Envision is located in the air conditioning control area of the center console. The button is positioned above the AC button and features an icon of a rectangle with three wavy lines. Note that the Envision's rearview mirror heating button is the same as the rear window defogging/heating button. The rearview mirror heating function is particularly useful during rainy or snowy weather. When activated, the heater behind the mirror quickly warms the surface, gradually removing rainwater or fog, eliminating the need for frequent manual wiping by the driver and thereby reducing driving hazards. The rearview mirror heating function can generally be activated in two ways: one is combined with the power-adjustable rearview mirror control knob—simply rotate the knob to turn it on; the other is located on the air conditioning control panel—press the heating button to activate it. No manual angle adjustment is required, as there is a control button on the driver's side. When the button is pressed, the electric heater behind the rearview mirror glass rapidly heats up to a fixed temperature (usually between 35-60°C) within minutes, distributing heat to both left and right mirrors. Simultaneously, due to the rising temperature and evaporation, water droplets on the mirror surface will shrink, and fog will gradually disappear, effectively defogging and deicing the mirror. However, in heavy rain, the effect may diminish and become less noticeable. The principle of rearview mirror heating involves the addition of electric heating wires to the mirrors. These wires consume a significant amount of power. Therefore, when using the rearview mirror heating function, ensure the vehicle is running. Avoid activating this function while the car is stationary to prevent draining the battery, which could lead to insufficient power for starting the vehicle. Other methods for defogging rearview mirrors include: 1. Opening windows slightly to create airflow between the inside and outside of the car, reducing the temperature difference and allowing fog to dissipate gradually. 2. Adjusting the car's air conditioning to the appropriate setting to blow warm air for defogging.
6
2
Share

Why Are There Few Buyers for Wey Cars?

Because the Wey brand is positioned as a luxury SUV, but its own product strength is insufficient. Here is the extended information: 1. Establishment time: The brand was established on November 16, 2016, as China's first brand named after the founder's surname. The brand belongs to Great Wall Motors Co., Ltd. and pioneered the era of luxury SUVs. 2. Off-road performance: The off-road performance is relatively good. The 2.0-liter turbocharged engine can generate 387 Nm of torque, and the part-time four-wheel-drive system with front-mounted four-wheel drive gives the vehicle better off-road capability. It adopts a body-on-frame structure, which provides better performance on unpaved roads. The front suspension type is double-wishbone independent suspension, and the rear suspension type is multi-link non-independent suspension, offering good modification potential.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.