···
Log in / Register

How to Maintain a Steady Speed in an Automatic Transmission Car?

3 Answers
OMason
09/01/25 7:08am
Methods to maintain a steady speed in an automatic transmission car include: 1. Correcting idle speed in case of gear shifting errors; 2. Using the D (Drive) position for mild slopes; 3. Depressing the accelerator pedal deeply for overtaking; 4. Using lower gears on snowy or rainy roads. Automatic transmission vehicles do not require manual gear shifting by the driver; the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. The gears in an automatic transmission are: 1. P (Park) for parking and starting; 2. R (Reverse) for reversing; 3. N (Neutral) for neutral position; 4. D (Drive) for forward movement, also known as the driving gear; 5. L (Low) for low-speed driving; 6. S (Sport) for sport mode.
Was this review help?
10
2
Share
LaAbel
09/14/25 2:56am
Maintaining a steady speed in an automatic car is actually quite simple. When I first started driving, I also found it challenging, but it gets easier with more practice. The key is to press the accelerator gently—don’t use too much force—and keep your foot steady. Once you feel the car accelerating to your desired speed, ease off slightly to hold the throttle in a constant position. Practicing on flat roads is most effective. For example, find an empty stretch of road, shift to D (Drive), gradually accelerate to 60 km/h, and then try to keep the throttle steady while watching the speedometer. If the speed drops, gently add a bit more throttle; if it exceeds, ease off slightly. Avoid sudden acceleration or braking, as it disrupts the rhythm. Remember, maintaining a steady speed saves fuel and makes the ride more comfortable. Beginners should dedicate a few minutes each drive to practice this—over time, it’ll become second nature.
Was this review help?
12
0
Share
Expand All
MaxLee
10/28/25 3:40am
Maintaining a steady speed is something I've mastered after over a decade of driving, and I believe the key lies in anticipating road conditions. When driving, don't just focus on what's immediately ahead; scan the distance. For example, gently press the accelerator before reaching an uphill slope, and ease off the throttle or use a lower gear when going downhill to prevent the car from gaining too much speed. Throttle control should be precise—on flat roads, keep your foot steady with constant pressure, allowing speed to fluctuate within 5 km/h. Cruise control is a great aid; activate it on highways, set your desired speed, and let the car maintain it automatically, saving both effort and fuel. However, don't rely on it too much—in city traffic, manual fine-tuning is necessary to avoid tailgating. Experience has taught me that steady driving enhances safety, reduces accident risks, and extends brake pad lifespan.
Was this review help?
1
1
Share
Expand All
More Forum Discussions

Can Pine Resin Dropped from Pine Trees on Cars Be Washed Off?

Pine resin dropped from pine trees on cars can be washed off. Basic Information about Pine Resin: Pine resin is a pale yellow or dark brown liquid with a distinctive odor of pine root oil. It has strong emulsifying properties, good wetting, penetrating, and leveling abilities, making it suitable for washing, fabric dyeing, and as a solvent for coatings, varnishes, and oils. It is also used as a mineral flotation agent, alcohol denaturant, antifoaming agent, and wetting agent. Storage Methods for Pine Resin: Store in containers made of iron, mild steel, copper, or aluminum. For long-term storage, keep in a cool, ventilated place away from light and sealed to avoid exposure to air and light, which can lead to the formation of resinous substances. Avoid skin contact.
9
5
Share

What is the general standard for four-wheel tire pressure?

The general standard for four-wheel tire pressure is 2.5kg for the front wheels and 2.7kg for the rear wheels. In summer, it is 2.3kg for the front wheels and 2.5kg for the rear wheels. Before traveling, observe the tire condition: Radial tires—commonly known as low-pressure tires—are normal as long as the flatness is not too low. If you feel strong elasticity when stepping on them with your foot and they are not too soft, they are normal. High-pressure tires—bias-ply tires with inner tubes—are normal if the shoulder area does not protrude when viewed from the front (commonly referred to as 'not bulging') and the contact area with the ground appears similar to usual when viewed from the side. Pay attention to the sound of tire friction with the ground: While driving, listen to the sound of tire friction with the ground, feel the cushioning force when passing over uneven roads, and notice if there are any changes in acceleration when accelerating compared to usual. These are all experiences accumulated over time.
17
5
Share

Can the wiper handle be replaced if it breaks?

The wiper handle can be replaced if it breaks. You can purchase the corresponding parts and replace it yourself, or you can go to a 4S shop for replacement. Replacement method: Use the controls in the car to lift the wiper upright, locate the position of the buckle on the wiper, release the buckle to remove the wiper; After removing the wiper, install the new wiper in the reverse order; When installing the new wiper, pay attention to the different lengths of the wipers. The longer one is generally in front of the driver's seat, and the shorter one is in front of the passenger seat. Be careful not to install them incorrectly. Daily maintenance methods for wipers: Regularly use cleaning agents to remove stains on the wipers and clean residual grease on the windshield to prevent friction noise during operation; Replace the wiper when necessary to prevent aging due to weather conditions, which may cause the wiper to malfunction.
18
2
Share

Is New Energy a Type of Car?

New energy is a type of car. New Energy Vehicles (NEVs): Refer to vehicles that utilize unconventional vehicle fuels as power sources (or use conventional vehicle fuels with new types of on-board power devices), integrating advanced technologies in vehicle power control and driving, resulting in vehicles with advanced technical principles, new technologies, and new structures. Classification of New Energy Vehicles: New energy vehicles include pure electric vehicles, extended-range electric vehicles, hybrid electric vehicles, fuel cell electric vehicles, hydrogen engine vehicles, extended-range electric vehicles, methanol vehicles, pneumatic vehicles, flywheel energy storage vehicles, etc.
11
0
Share

Where is the VIN located on a four-wheeled vehicle?

Four-wheeled vehicle VINs are generally located at the lower left corner of the windshield, on the right side of the front passenger seat, and some are located in the engine compartment. Vehicle Identification Number: (or frame number), abbreviated as VIN, is a unique set of seventeen letters or numbers used on automobiles to identify the manufacturer, engine, chassis serial number, and other specifications. Two formats of Vehicle Identification Numbers: There are mainly two formats of VINs. The first is the ISO3779 standard adopted by the European Union, and the second standard is primarily used in North America, which is more stringent than the first but still compatible with it.
11
5
Share

Can Increasing the Throttle Voltage Improve Electric Speed?

Increasing the throttle voltage cannot improve electric speed. Removing the speed limit wire: Many electric vehicles owned by shop owners use a speed limit wire to restrict speed. If the speed is limited by such a wire, it is very easy to resolve. Simply open the internal structure on the side or rear of the electric vehicle, locate the speed limit wire, and then remove it. Adding an additional battery: This method is also particularly practical. The speed of an electric vehicle is maintained at its optimal level under a certain working voltage. Adding an extra battery to the electric vehicle can increase its working voltage, thereby increasing the speed of the electric vehicle.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.