How to Maintain a Car?

What are the differences between BYD's Qin, Han, Tang, Song, Yuan, Ming, and Qing models?

BYD's Tang, Song, and Yuan represent different models under the BYD brand. Currently, there are no Ming or Qing models. These vehicles (Tang, Song, Yuan) differ in appearance, configurations, and powertrains. In terms of body size, the BYD Tang is the largest, the BYD Song is mid-sized, and the BYD Yuan is the smallest. Below are the specific details: 1. BYD Tang: This is a mid-size SUV launched in July 2019. It is powered by a 2.0T engine with a maximum power output of 141 kW and a maximum torque of 320 Nm, paired with a 6-speed automatic transmission. The vehicle dimensions are 4870/1940/1720 mm. 2. BYD Song: This is a compact SUV launched in August 2018. It is equipped with a 1.5T engine delivering a maximum power of 113 kW and a maximum torque of 240 Nm, mated to a 6-speed dual-clutch transmission. The vehicle dimensions are 4600/1830/1700 mm. 3. BYD Yuan: This is a small SUV launched in April 2017. It features a 1.5L engine with a maximum power of 80 kW and a maximum torque of 145 Nm, paired with a 6-speed dual-clutch transmission. The vehicle dimensions are 4360/1785/1650 mm.

18

5

Share

How Many Cylinders Does the Honda Lingpai 1.8L Engine Have?

The Honda Lingpai 1.8L engine is a four-cylinder engine, produced by Dongfeng Honda's engine factory and is classified as a domestically manufactured engine. The Honda Lingpai 1.8L engine model is P10A3, with a maximum power output of 100 kilowatts, a maximum horsepower of 136, and a maximum torque of 169 Newton-meters. For daily maintenance of the Honda Lingpai 1.8L engine, the following methods can be employed: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions. For diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard being no lower than the manufacturer's specified requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will deteriorate during use. After a certain mileage, its performance will degrade, leading to various engine issues. To prevent malfunctions, change the oil periodically according to usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through the filter element, it may rupture the filter or open the safety valve, bypassing the filter and carrying contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Periodically use a radiator cleaner to flush the radiator. Removing rust and scale deposits not only ensures proper engine operation but also extends the overall lifespan of the radiator and engine.

7

5

Share

What is the fuel consumption of the Buick GL8 2.0T?

The fuel consumption of the new 2.0T Buick GL8 is 11.5 liters per 100 kilometers. Here are the relevant details: 1. Engine: The new GL8 is equipped with General Motors' latest LSY engine, a 2.0-liter turbocharged engine. 2. Dimensions: The Buick GL8 measures 5238 mm in length, 1878 mm in width, and 1776 mm in height, with a wheelbase of 3088 mm. 3. Configuration: The new GL8's 2.0-liter turbocharged engine delivers a maximum power of 174 kW and a maximum torque of 350 Nm. The engine's maximum power is achieved at 5000 rpm, and the maximum torque is available between 1500 to 4000 rpm. This engine features TRIPOWER variable valve management technology, direct fuel injection, and an aluminum alloy cylinder head and block. It is paired with a 9-speed automatic transmission.

15

4

Share

Can You Drive When Water Submerges the Car Tires?

Water submerging the car tires is drivable. When driving on waterlogged roads, pay attention to the following: 1. Tip 1: Shift to a low gear and pass slowly. Although the water surface appears flat, the underwater environment is unknown. Driving through water may create waves that could splash into the air intake, damaging the car. 2. Tip 2: If the engine stalls while wading through water, never attempt to restart it. Water may flow back into the engine through the exhaust pipe, causing stalling or even engine damage. It's best to call a tow truck for assistance. 3. Tip 3: Never let off the accelerator, as doing so can create a strong suction in the exhaust pipe, which would otherwise expel gases, drawing water back into the engine. 4. Tip 4: If the vehicle takes in water, first call your insurance company to file a report. Be sure to report the incident within 24 hours, follow the insurance company's procedures, and contact a repair service as soon as possible.

7

5

Share

What are the reversing skills for parking?

Here is a detailed introduction to the reversing skills for parking: 1. Reverse from the left side: When reversing, try to choose to reverse from the left side, as it is easier for the driver to observe. During the reversing process, first look behind, and then pay attention to the side rearview mirrors. 2. Observe the situation behind the car: Before reversing, you should first clearly see the situation behind the car, estimate the reversing route, and determine whether the front of the car will hit obstacles during the reversing process. Especially when the steering wheel is turned significantly, the turning radius of the car's steering wheels is larger than that of the rear wheels, and the front of the car swings outward more during reversing. At this time, you must pay attention to avoid scraping the front of the car.

4

3

Share

Is Gasoline Additive Useful?

Fuel additive, commonly referred to as fuel booster, is not entirely useless, but its effectiveness is far less than what is advertised. In most cases, using fuel additives serves more as a psychological comfort. Below is relevant information about fuel additives: Fuel additives were developed to remove carbon deposits. There are numerous brands of fuel boosters on the market, with various types available, including cleaning-type fuel boosters, performance-enhancing fuel boosters, maintenance-type fuel boosters, and vehicle-specific fuel boosters. Here are introductions to several types of fuel additives: 1. Cleaning-type fuel booster. For fuel-injected vehicles, the key component of fuel boosters is polyetheramine (PEA). PEA is highly resistant to carbonization under high temperatures and has strong cleaning capabilities, which can partially remove surface carbon deposits from areas such as pistons, cylinder walls, valve ports, and fuel injectors. However, long-term accumulated carbon deposits may not be completely removed. Since fuel boosters are added to the fuel tank, they theoretically have a certain cleaning effect on areas where the fuel passes through. Areas not in contact with the fuel, such as the intake manifold and throttle valve, will not benefit from the cleaning effect. 2. Performance-enhancing fuel booster. The claim of performance enhancement is largely exaggerated by merchants. Its primary function is to suppress engine knock, which causes the engine to automatically delay ignition, leading to reduced power and increased fuel consumption. Adding such fuel boosters increases the octane rating, suppresses knock, and allows the engine to ignite normally, restoring its power rather than enhancing it. This type of fuel additive is designed for low-quality gasoline. 3. Maintenance-type fuel booster. Similar to dietary supplements, no matter how good they are, they cannot cure diseases. As soon as the engine starts running, carbon deposits will inevitably form. Moreover, maintenance-type fuel boosters are low-cost but high-priced, causing many car owners to spend money unnecessarily with uncertain results. They are not as effective as performing an internal engine carbon cleaning or using an IV drip method every 40,000 kilometers. 4. Vehicle-specific fuel additives. These are fuel boosters specifically developed for certain vehicle models. For example, Honda recommends adding its dedicated fuel cleaner regularly during maintenance at 4S shops for its new models. This is because Honda engines generally use the VTEC system, which stands for Variable Valve Timing and Lift Electronic Control. This system provides good power, high torque, and fuel efficiency, but it has a significant weakness: high sensitivity to carbon deposits. Due to the presence of low-speed and high-speed camshafts, the intake valve opening is relatively small at low speeds, meaning the intake cross-sectional area is small. If carbon deposits contaminate this area, they can significantly affect airflow. The vehicle's ECU may misjudge the situation, leading to unstable fuel injection regulation. Given this characteristic of Honda engines, the company recommends that car owners add Honda's dedicated fuel additive twice a year.

15

5

Share

How to Maintain a Car?

What are the differences between BYD's Qin, Han, Tang, Song, Yuan, Ming, and Qing models?

How Many Cylinders Does the Honda Lingpai 1.8L Engine Have?

What is the fuel consumption of the Buick GL8 2.0T?

Can You Drive When Water Submerges the Car Tires?

What are the reversing skills for parking?

Is Gasoline Additive Useful?

What needs to be replaced if the camber angle cannot be adjusted?

Can ordinary people buy Hongqi cars?

Does the 2012 Audi A4 have Bluetooth?

How to Adjust When the Right Side is Too Wide During Reverse Parking?