How to Lower a Jack?

1 Answers
SanRebecca
07/25/25 8:11am
Actually, lowering a jack is quite similar to raising it. Connect the provided wrench and socket to the rear of the jack. Then simply rotate it counterclockwise to decrease the jack's height. However, be careful not to apply excessive force when operating the jack.
Was this review help?
7
0
Share
More Forum Discussions

How many kilometers does a car typically run in a year?

20,000 to 30,000 kilometers per year. Below are common driving issues and their solutions: 1. Stalling on complex road sections: This is often caused by improper coordination between the brake pedal and clutch pedal. Stay focused while driving, control speed appropriately, and coordinate braking with clutch operation. 2. Stalling during uphill following: After stalling, promptly engage the handbrake to prevent rolling back. When restarting, apply slight throttle to avoid stalling again. 3. Hand-over-hand steering: Some drivers tend to reach inside the steering wheel when making turns or U-turns, known as "hand-over-hand" steering. This dangerous practice can prevent quick emergency responses if hands get trapped during sudden wheel movements, potentially causing arm injuries or serious accidents.
14
3
Share

What causes the electric current noise when stepping on the accelerator?

The causes of electric current noise when stepping on the accelerator are as follows: 1. Fuel pump motor noise: When there is internal wear or impurities in the fuel pump motor, it will produce abnormal noise when the accelerator is pressed. This issue requires replacing the fuel pump. 2. Throttle body noise: Modern throttle bodies use electronic throttle control, where the motor naturally controls the opening and closing of the valve. When the motor gears wear out, insufficient engagement causes abnormal noise. Excessive carbon deposits or sludge in the throttle body can also lead to noise. The throttle body can be cleaned, and if the motor is damaged, the throttle body needs to be disassembled to replace the appropriate motor.
13
1
Share

When is the best time for the first maintenance of a new car?

New cars should have their first maintenance at 3 months or 5,000 kilometers, whichever comes first. Here are the items that need to be serviced during the first maintenance: 1. Replacement: Replace the three filters and engine oil. 2. Inspection: Check whether the brake fluid, transmission oil, and power steering fluid should be replaced. 3. Testing: Test the brake pads, tires, shock absorbers, and suspension. 4. Inspection: Check the spark plugs, throttle valve, and fuel supply system. 5. Rotation: Rotate the front and rear wheels and perform a routine inspection. Here are some additional tips for the first maintenance of a car: 1. Appointment: Make an appointment in advance. 2. Essentials: Bring necessary items such as the maintenance manual and vehicle registration. 3. Records: Keep a record of any faults or questions encountered while driving and inform the staff during the first maintenance registration.
6
1
Share

Is there traffic restriction in Shenzhen on weekends?

Shenzhen does not impose traffic restrictions on weekends. For non-local vehicles, the restriction period is from 7:00 AM to 9:00 AM and from 5:30 PM to 7:30 PM on weekdays, with no restrictions on weekends and statutory holidays. Below are relevant details: 1. Temporary Pass: Non-local passenger vehicles with license plates issued outside the city that need to travel on restricted roads during restricted hours due to national or provincial large-scale conferences, exhibitions, etc., must apply for a temporary vehicle pass in advance at the city traffic police department and can only travel as per regulations upon approval. 2. Exempt Vehicles: Military vehicles, police cars, fire trucks, ambulances, engineering rescue vehicles performing tasks, as well as passenger transport vehicles (excluding rental cars) and medium-sized or above passenger vehicles with road transport certificates.
12
5
Share

Do You Need to Turn on the Width Indicator Lights When Driving at Night?

When driving at night, not only do you need to turn on the width indicator lights, but you should also turn on the car's headlights. Here is some relevant information about width indicator lights: 1. Definition: When the light switch is turned to the first position, the small lights that illuminate at the front and rear are the width indicator lights (also known as evening running lights, which are turned on when it is not completely dark; the next position after width indicator lights is the low beam, while the high beam refers to the main headlights). 2. Purpose: They indicate the width of the car to alert other vehicles in front and behind. Width indicator lights are used during evening driving to make the car visible to other vehicles. Their primary function is to signal the presence and approximate width of the car to other drivers, both ahead and behind.
20
1
Share

Can a 5-seater car accommodate 4 adults and 2 children?

A 5-seater car cannot accommodate 4 adults and 2 children as this would constitute overloading. Here is some information about overloading: 1. Legal Basis: According to the "Road Traffic Safety Law of the People's Republic of China," if a passenger vehicle carries more passengers than its rated capacity, a fine ranging from 200 to 500 yuan will be imposed, and 3 penalty points will be deducted. If the number of passengers exceeds 20% of the rated capacity or if the vehicle carries cargo in violation of regulations, a fine ranging from 500 to 2,000 yuan will be imposed, and 6 penalty points will be deducted. 2. Explanation: Both adults and children are considered independent individuals, so they are all counted as part of the overloading. Overloading can easily lead to traffic accidents. In the event of an accident, if overloading is involved, the driver will not only be held responsible but may also face issues with subsequent insurance claims.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.