How to Lock the Doors of the Envision?

Can a smart car go on the highway?

smart cars can go on the highway. The specific details are as follows: 1. Power: The Mercedes-Benz smart is equipped with a three-cylinder engine, delivering a maximum power of 109 horsepower (80 kW) and a maximum torque of 170 Nm. The official data states a top speed of 155 km/h. Although there are no issues with going on the highway if all documents are complete, due to its lightweight and small size, it is not recommended to drive this car at high speeds on the highway as it can easily become unstable. Even if driving on the highway is unavoidable, it is advised to keep the speed below 100 km/h. 2. Body dimensions: The dimensions are 2695 mm in length, 1663 mm in width, and 1542 mm in height, with a wheelbase of only 1873 mm. It is positioned as a micro commuter car, and there is also a convertible version available for consumers. However, there have been real cases where, after going on the highway, the panoramic roof suddenly blew off, nearly hitting a small Polo behind it. This can be considered a global first and is an important reason why it is not recommended to drive a smart car on the highway.

5

0

Share

How to Reset the Maintenance Light on a Corolla 1.2t?

Steps to reset the maintenance light on a Corolla 1.2t: 1. Press the Corolla's one-touch start button to ignite and start the vehicle; 2. Press the trip meter reset button to switch to trip meter A; 3. Turn off the engine switch; 4. While pressing the trip meter reset button, switch the engine to ON mode, and hold the button until the trip meter displays 000000. The maintenance light will then be reset. The Corolla 1.2t has a maximum power output of 116 horsepower, a maximum torque of 185 Nm, and a top speed of 180 km/h.

11

3

Share

Does Water Entering the Exhaust Pipe Affect the Car?

Water entering the exhaust pipe can affect the car. Here are the detailed impacts: 1. It can cause serious consequences such as water entering the engine: If only the exhaust pipe has water, the accumulated water should be removed as soon as possible to prevent impurities in the water from clogging the three-way catalytic converter or damaging the oxygen sensor. 2. It may lead to exhaust pipe blockage: Poor exhaust can cause the engine to stall, but the engine may not necessarily take in water at this time. 3. Piston damage: Since water is far less compressible than oil, if a certain amount of water enters the cylinder under high pressure, it can easily break the engine's connecting rod or even damage the piston.

13

3

Share

How to Renew a Driver's License After Six Years?

Renewing an expired driver's license requires attention to the regulations, locations, and procedures for renewal. Regulations for Driver's License Renewal: If the driver's license has expired for less than one year, promptly visit the vehicle management office for renewal. If it has expired between one to three years, you must apply for the subject one exam at the vehicle management office, and only after passing the exam can you obtain a new license. If the license has expired for more than three years, it will be canceled, and you will need to retake the driving test. Required documents include the original ID card, the driver's license, and three one-inch white-background photos. Locations for Driver's License Renewal: There are many locations for renewing a driver's license. The vehicle management office is a common choice for many people. Additionally, the mobile app "Traffic Management 12123" and police-post convenience service stations are also available for license renewal. Procedures for Driver's License Renewal: Before renewal, check online for any traffic violation records and handle them accordingly. You must apply for renewal 90 days in advance; even one day overdue means the license is invalid, and driving with it constitutes "driving without a license." The renewal process is straightforward: first, handle any violations, then undergo a physical examination. After passing the exam, apply through the vehicle management office or the mobile app.

16

5

Share

How to Close the Front Hood of a Toyota Corolla?

Toyota Corolla front hood closing method: Pull down the hood, place both hands on the front edge of the hood, corresponding to the positions of the headlights on both sides, and press down gently. No excessive force is needed; a click sound indicates successful closure. Another method is to first lower the hood support rod, support the hood with the other hand, move it downward, and when the hood is about 30 centimeters from closing, release it to allow free fall. A clunk sound confirms closure. In terms of powertrain, this vehicle is equipped with two engines: a 1.8-liter naturally aspirated engine and a 1.2-liter turbocharged engine, paired with an ECVT transmission and a CVT transmission, respectively.

5

4

Share

What does it mean when the TRC OFF light is on in a Corolla?

When the TRC OFF light is on in a Corolla, it indicates that the vehicle's traction control system is currently turned off. The traction control system is designed to help the car achieve optimal traction under various driving conditions. The Corolla features a 4-door, 5-seat sedan body structure, with exterior dimensions of 4635mm in length, 1780mm in width, 1455mm and 1435mm in height, and a wheelbase of 2700mm. The Corolla is equipped with either a 1.2T turbocharged engine or a 1.8L naturally aspirated engine, with an L-type cylinder arrangement, and is paired with either a 10-speed continuously variable transmission or an electronic continuously variable transmission.

6

2

Share

How to Lock the Doors of the Envision?

Can a smart car go on the highway?

How to Reset the Maintenance Light on a Corolla 1.2t?

Does Water Entering the Exhaust Pipe Affect the Car?

How to Renew a Driver's License After Six Years?

How to Close the Front Hood of a Toyota Corolla?

What does it mean when the TRC OFF light is on in a Corolla?

Why Does Tesla Charge Extra for Colors?

Which company's motors does Tesla use?

How many months of production time qualifies a new car as inventory stock?

Where is the location of the car's drainage holes?