How to Lock the Car Doors from Inside So Others Can't Open Them?

2 Answers
McLincoln
07/24/25 2:14pm
First, ensure the environment is safe and the temperature is suitable. Before locking the doors, remember to open the windows or sunroof to leave a ventilation gap. Next, locate the lock button on the driver's side door and press it. If there is no lock button, you can use the car key to lock the doors.
Was this review help?
3
2
Share
FinnMarie
08/11/25 8:06am
Every time before driving, I make sure to lock the car doors. The most common method is pressing that small button on the driver's side door, which looks like a little lock icon. A gentle press locks all doors, making it impossible for anyone outside to open them. For extra safety in the rear seats, especially when children are sitting there, the child safety lock must be used: most cars have a small switch on the rear door edge that requires opening the door and turning it with a small key or coin to activate. This prevents the door from being opened from both inside and outside. Developing this habit is extremely important—it prevents children from accidentally opening doors while the car is moving and also deters carjackings. My routine is to press the lock button once before starting the vehicle, and I’m especially prompt about it at night or in less crowded areas. Remember to check the user manual, as the location varies by model—SUVs might have it at the bottom of the rear door, while sedans may place it on the door side. This avoids forgetting to check when distracted. Safety first—start with the small details.
Was this review help?
19
3
Share
Expand All
More Forum Discussions

How to Remove and Install the Door Panel of a BMW 5 Series?

The method for removing and installing the door panel of a BMW 5 Series is as follows: 1. There is a screw mounting point (covered by a small plastic panel) inside the door handle. First, remove this screw. 2. Then, find a flat piece of wood or steel and insert it into the gap between the door panel and the door sheet metal. 3. Move to the location of the clips and gently pry them to release the clips. 4. Proceed along the lifted edge to pry all the clips, and then install the new door panel. Below is an introduction to the BMW 5 Series: 1. The new 5 Series has made slight adjustments to the configurations of the long-wheelbase version: Among them, the mid- and low-end models have added an electric trunk lid (optional for the standard-wheelbase models) and an electric sunroof as standard features; the 525Li/530Li M Sport Package models have removed the adaptive high/low beam and headlight steering functions. 2. At the same time, the new car still offers the Innovation Package, Entertainment Package, Comfort Package, and Winter Package for users to choose from, providing features such as LED adaptive headlights, automatic high/low beam switching, Harman Kardon sound system, wireless charging, Wi-Fi hotspot with built-in data package, comfort access, auto-dimming rearview mirror, front/rear seat heating, and four-zone air conditioning, among many other comfort features.
6
0
Share

What Causes the Abnormal Noise from the Left Front Wheel of the 8th Generation Accord?

The abnormal noise from the left front wheel of the 8th Generation Accord may be caused by increased play in the left front wheel suspension or a malfunction in the left front wheel shock absorber. Generally, the causes of abnormal noise are related to faults in the front wheel bearings or suspension springs. It is recommended to check for wear in the tire brake pads and bearings, and replace them if damaged. Below are some details about the 8th Generation Accord: 1. Increased dimensions and space are among the key features of the 8th Generation Accord. Its length, width, and height are 4945mm, 1845mm, and 1480mm respectively, with a wheelbase of 2800mm. In terms of classification, the 8th Generation Accord moved from the 'midsize' category under the U.S. Environmental Protection Agency (EPA) standards to the 'large' category, surpassing previous models in both size and space. 2. Interior features: The 8-inch embedded color LCD screen includes GPS navigation, trip computer functions, and more. It can be operated conveniently and intuitively via a one-touch multifunction button, offering a better human-machine interface compared to similar systems in European luxury cars, ensuring active driving safety.
2
1
Share

What are the causes of the high temperature issues in the Besturn B50?

The following are the reasons for the high temperature in the Besturn B50: 1. Electrical circuit failure: The electronic cooling fan does not rotate, reducing the radiator's heat dissipation capacity. At this time, check the operation of the electronic fan. Unplug the electronic fan's wire connector and directly power it with a power line. If the electronic fan rotates, it indicates that it is working properly; if it does not rotate, it indicates damage. 2. Mechanical failure: The fan coupling lacks oil, is damaged, or stuck, causing the cooling fan not to rotate. When the engine runs for a long time, the water temperature is high or even boils. This is generally caused by the thermostat failing, resulting in poor water circulation. After the water temperature rises, the thermostat valve does not open, and the cooling water does not circulate in a large loop, thus failing to dissipate heat and regulate the water temperature. In tropical regions of southern China or in emergencies, the thermostat valve can be removed. 3. Improper assembly: For engines that have undergone major repairs or are newly assembled, during the installation process, high water temperature often occurs due to mismatched dimensions or fitting clearances. For a newly overhauled and assembled engine, running at medium speed for about half an hour may result in high water temperature. This is generally due to the gap between the piston or piston ring and the cylinder being too small. Prolonged operation can also cause issues such as stuck rings, broken rings, and cylinder scoring.
19
1
Share

How to Reset the Maintenance Light on Great Wall Fengjun 5 Diesel?

Great Wall Fengjun 5 maintenance light reset method is as follows: 1. Turn off the car's engine. After the engine is off, press and hold the reset button. 2. While holding the reset button, insert the key and start the engine. 3. After the vehicle starts, release the reset button and briefly press the clock adjustment button once. 4. At this point, the maintenance cycle light will display in reset mode, and it will return to normal after a few seconds. 5. After the reset is complete, you can check the interval mileage until the next maintenance by pressing the clock adjustment button 4 times. The multifunction display will show the interval mileage until the next maintenance.
12
2
Share

When will the China VI emission standard be implemented in Shanxi?

According to the relevant plan, the implementation of the China VI emission standard in Shanxi will be divided into two phases: "China VI a" and "China VI b", corresponding to July 1, 2020 and July 1, 2023, respectively. It can be said that China VI a is like a transitional stage from China V to China VI. Here is an introduction to vehicle emissions: 1. In order to protect the environment and reduce vehicle emission pollution, the country has successively introduced a series of policies: "China IV", "China V", "China VI" and other emission standards. These standards are like mobile phones, with a new version released every certain period. However, there is a certain difference: once a new emission standard is introduced, the old standard will be phased out, and vehicle models that do not meet the new standard can only be "disposed of". 2. Introduction to China VI: The strictness of the "China VI" standard is completely different from previous levels. It is understood that "China VI" is one of the most stringent emission standards in the world. "China VI" is an upgraded version of "China V". Under the exclusion of working conditions and test influences, the carbon monoxide emissions of gasoline vehicles are reduced by 50%, the emission limits of total hydrocarbons and non-methane hydrocarbons are reduced by 50%, and the nitrogen oxide emission limits are tightened by 42%. It can be seen that the country is quite strict on emission standards. On one hand, this can encourage automobile manufacturers to produce more standard vehicles, and on the other hand, it is also to protect the environment on which we depend and improve the quality of life.
16
4
Share

What is the sports car with a logo similar to Wuling?

The sports car with a logo similar to Wuling is the Chevrolet Corvette. The Corvette is a sports car under the Chevrolet brand. Taking the 2009 Corvette Coupe as an example, its body dimensions are: length 4435mm, width 1844mm, height 1244mm, with a wheelbase of 2685mm and a fuel tank capacity of 68.1 liters. The 2009 Corvette Coupe is equipped with a 6.2L naturally aspirated engine, paired with a 6-speed automatic transmission, delivering a maximum power of 325kW at 5900 rpm and maximum torque at 4600 rpm.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.