How to Lock the Car Door with a BMW Key?

What are the reasons for inaccurate fuel gauge display?

The following are the reasons for inaccurate fuel gauge display: 1. The fuel level sensor inside the vehicle's fuel tank is damaged. 2. The vehicle's dashboard is damaged. 3. The float inside the fuel tank is damaged, and it must be repaired or replaced in time, otherwise it will be impossible to determine the fuel usage of the motor vehicle. Extended content: The fuel gauge of a motor vehicle can display the remaining fuel level in the fuel tank. When the fuel gauge of a motor vehicle shows inaccuracies, the fuel float inside the fuel tank can be inspected to identify the specific cause of the fault, and then targeted repairs can be carried out. After repairs, the vehicle's fuel gauge display will return to normal, and the repaired vehicle can be used normally.

13

3

Share

How to Replace the Battery in a Chery Key?

Here is the method for replacing the battery in a Chery car key: 1. Prepare the tools: a battery (the model may vary depending on the car model) and a flathead screwdriver. 2. Use the flathead screwdriver to insert it into the edge seam (or bottom) of the key and pry open the plastic cover. 3. Once opened, you can see the battery. Remove the old battery and insert the new one. 4. Reset the key. When resetting, pay attention to the position of the inner edge of the cover to avoid catching the battery sleeve. 5. It should be noted that Chery has multiple car models, and the operation method may vary depending on the model. For example, for the QQ model, hold the key head with one hand and the key base with the other, then simply pull them apart. For specific instructions, it is recommended to refer to the vehicle's user manual, which will provide detailed explanations.

15

3

Share

What to Do If the ETC Device Is Lost?

ETC device replacement method: The vehicle owner should bring their ID card, the original and a copy of the vehicle registration certificate to the bank counter to handle the change, replacement, or reissuance of the card. The installation process of the ETC device is as follows: Upon receiving the device, first check if the ETC card and the electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU; the red light will briefly turn on, and the OLED screen will display "Tag Invalid" or "Please Insert Card," indicating the device is functioning normally. Clean the front windshield to ensure the glass surface is smooth, clean, and dry. Then, peel off the adhesive backing of the OBU and stick it to the installation position. Press firmly with your hand for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front facing the driver and the back facing the windshield, ensuring the chip is properly inserted into the OBU device. ETC device activation method: Insert and remove the ETC card twice in succession until the electronic tag screen displays "Bluetooth On." If "Tag Invalid" appears when inserting and removing the card twice without attaching the electronic tag, this is normal and does not affect activation. Alternatively, press the button on the top of the electronic tag directly to enable Bluetooth. Turn on the phone's Bluetooth, open the corresponding mobile app (usually with a download QR code on the electronic tag), and enter the device activation interface. Click on "Device Connection" and wait patiently for the "Connection Successful" prompt. Once connected successfully, upload a photo of the vehicle's front to complete the activation.

13

5

Share

How long does it take to check traffic violations?

Traffic violations can generally be checked within 2 to 5 working days, with a maximum of 13 working days. The relevant regulations are as follows: 1. Verbally inform the violator of the basic facts of the violation; 2. Listen to the violator's statements and defenses, and if the facts, reasons, or evidence provided by the violator are valid, they should be adopted; 3. Prepare a violation notice and notify the party to accept processing within fifteen days; 4. The violation notice must be signed by the violator and the traffic police officer or stamped, and bear the seal of the traffic management department of the public security authority. If the party refuses to sign, the traffic police officer shall note this on the violation notice; 5. The violation notice shall be delivered to the party on the spot. If the party refuses to accept it, the traffic police officer shall note this on the violation notice, which shall then be considered as served.

16

2

Share

How is horsepower calculated?

1 imperial horsepower = 0.746 kilowatts (kW), 1 metric horsepower = 0.735 kilowatts (kW); Power (W) = 2π × Torque (N-m) × Speed (rpm)/60; Simplified calculation becomes: Power (kW) = Torque (N-m) × Speed (rpm)/9549. Horsepower is a unit of engine power, representing the engine's working capacity per unit of time. More details are as follows: 1. Horsepower is a commonly used unit of power measurement in engineering. It generally refers to metric horsepower rather than imperial horsepower. The definition of metric horsepower is entirely artificial, taking a value very close to imperial horsepower. 2. It is defined that 1 metric horsepower is the work done to lift 75 kilogram-meters in 1 second. That is: 1 metric horsepower = 75 kilogram-force meters/second = 735 watts. Countries like the United Kingdom and the United States use imperial horsepower. 1 imperial horsepower equals 550 foot-pounds/second, equivalent to 745.7 watts. 3. In the late 18th century, British physicist James Watt (1736–1819), to measure the power of newly manufactured steam engines, defined horsepower as the work required to lift a 1000-pound weight by 33 feet in 1 minute. This is imperial horsepower, denoted by the letter HP. 4. 1 imperial horsepower = 1.0139 metric horsepower. There is no specific letter for metric horsepower, and the value of 1 metric horsepower differs from that of 1 imperial horsepower. Horsepower has been abolished in China's legal measurement units.

2

1

Share

What Level of Car is the DS4S?

According to the official introduction from Changan PSA Peugeot Citroën, the DS4S is a compact car, so it belongs to the A+ class. In terms of body dimensions, the DS4S measures 4435*1843*1510mm in length, width, and height, which also meets the standards for this class of vehicles. Here are some details about the model: 1. The DS4S is equipped with a 30THP turbocharged engine across the entire lineup, paired with an Aisin third-generation 6-speed automatic transmission. 2. It features a newly upgraded intelligent connectivity system, an 8-inch LCD display, and higher-end models also come with the ADAS intelligent driving assistance system. 3. The exterior continues the DS brand's family-style front grille design. The C-shaped LED daytime running lights give the DS4S a sharp and dynamic look, while the dual chrome exhaust pipes at the rear add a sporty touch.

19

4

Share

How to Lock the Car Door with a BMW Key?

What are the reasons for inaccurate fuel gauge display?

How to Replace the Battery in a Chery Key?

What to Do If the ETC Device Is Lost?

How long does it take to check traffic violations?

How is horsepower calculated?

What Level of Car is the DS4S?

What does gasoline via mean?

Where is the ABS master cylinder located in a car?

Which country is Ford from?

How long does it take to get a replacement after losing a driver's license?