How to Lock Tesla Doors When People Are Inside the Car

1 Answers
OJace
07/29/25 1:22pm
Tesla's method for locking doors when people are inside the car is: The doors will automatically lock as long as the key leaves the vehicle. Tesla features an automatic locking function. After exiting the car, once the vehicle detects that the key has moved sufficiently far away, it will automatically lock without requiring any additional operation. Taking the Model Y 2021 Long Range All-Wheel Drive version as an example: Its dimensions are 4750mm in length, 1921mm in width, and 1624mm in height, with a wheelbase of 2890mm. It is equipped with an electric single-speed transmission, achieving a top speed of 217 kilometers per hour. The body type is a 5-door, 5-seat SUV.
Was this review help?
7
4
Share
More Forum Discussions

What level does LLumar Enjoy belong to?

LLumar Enjoy belongs to the mid-range level. Brief introduction of LLumar: AVS70 is a metallic film with a heat insulation rate of up to 58%, even higher than V-KOOL V70, delivering excellent performance. AIR80 has high light transmission with a sky-blue color and good heat insulation. Commonly used side window films: LATI35/15 features a diamond-like ceramic structure, ensuring stability and comes with a lifetime warranty. PP35 has a natural color with slight reflective effects, providing clear outward visibility and heat insulation. CTX30/40/50 from the Enjoy series utilizes advanced coated film technology with low visible light reflectivity, ensuring safe and enjoyable driving.
20
2
Share

What does the AC button in the car mean?

The AC button in the car is the abbreviation of the air conditioning device. Pressing the AC button will start the air conditioning to adjust the temperature according to the set temperature, while turning it off will only activate the air blower part, adjusting the mechanism. When the AC button in the car is turned on, the compressor inside the car will start working. The AC button in the car also has a small function, which is to defog the windows. When the air humidity is relatively high, entering the car will make you feel very damp. At this time, pressing the button and blowing air for a while will remove a lot of the moisture, thereby achieving the function of defogging the windows. In AC mode, since the car's air conditioning compressor is always in working condition, it will inevitably lead to an increase in fuel consumption and engine load. When using the heater, the AC switch should be turned off to prevent the compressor from running while using the heater, causing additional fuel consumption during heating.
20
2
Share

What is the Principle of a Pull-Back Car?

The principle of a pull-back car is that the axle transmits force to the pull-back gear to perform work, and the gear drives the pull-back gear. Design of the pull-back car: Through the axle transmitting force to the pull-back gear to perform work, the gear-driven pull-back gear structure converts the kinetic energy from hand motion into potential energy. The pull-back car is designed for rear-wheel forward drive, and the pull-back gear is designed for backward rotation to store energy. Due to the fixed direction of the axle, as long as the energy stored in the pull-back gear is sufficient or the static friction between the car and the ground is small enough, the pull-back car can move forward by the energy output from the pull-back gear, which acts as its heart. Difference between an inertia car and a pull-back car: An inertia car can move both forward and backward because it has a flywheel device, while a pull-back car can only move in a fixed, single direction.
6
4
Share

What does the OBD light indicate?

OBD light indicates there is an issue with the vehicle's electronic control system or exhaust emissions. The specific condition needs to be checked by professionals at a repair shop or 4S dealership. OBD refers to On-Board Diagnostics system, which consists of a scanner, oscilloscope, and interface. It automatically diagnoses vehicle conditions and sends fault codes to maintenance personnel, enabling them to quickly locate the fault. If the vehicle's OBD interface is occupied, it is generally only used as a power source and will not affect the vehicle itself, as peripheral devices only read the data from the vehicle's computer via the OBD interface without writing programs. Moreover, OBD systems have self-protection functions; writing programs requires entering the correct password. Generally, for safety reasons, it is advisable not to arbitrarily occupy the vehicle's OBD interface.
7
2
Share

What is the difference between automatic transmission and dual-clutch?

The differences between automatic transmission and dual-clutch: 1. Different principles: Automatic transmission uses a computer to control hydraulic oil to push pistons for gear shifting based on throttle size, vehicle speed, and throttle opening; dual-clutch sets two clutches, one controlling odd-numbered gears and the other controlling even-numbered gears. 2. Different operation methods: Automatic transmission vehicles automatically select the appropriate gear based on driving speed; dual-clutch combines two automatic transmission clutches together, eliminating the need to press the clutch pedal. 3. Different effects: Automatic transmission is more practical, allowing drivers to manually control gears to better match engine speed with gear position, which can also make the car more fuel-efficient; dual-clutch eliminates power transmission stagnation during gear shifting, ensuring that engine power is transmitted to the wheels without delay, commonly used in sports cars.
11
1
Share

Where is the location to add windshield washer fluid in the Sagitar?

The location to add windshield washer fluid in the Sagitar is inside the engine compartment. On the left side, there are two white reservoirs. The one with a blue cap and a narrow bottle opening below is for the windshield washer fluid. Simply open this cap and directly pour in the windshield washer fluid. After filling, securely close the cap and shut the engine compartment. The Sagitar is a joint venture A+ class sedan brand under FAW-Volkswagen. The Sagitar has a length, width, and height of 4753mm, 1800mm, and 1462mm respectively, with a wheelbase of 2731mm. The front of the Sagitar features a six-ridge-line diving-style hood that aligns with the grille facade, paired with new LED headlights and exterior ambient lighting on the front grille. The side profile of the Sagitar incorporates a comet-style encircling waistline and elastic surface design, complemented by a coupe-style C-pillar and 18-inch two-tone alloy wheels.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.