How to Lock a Toyota Crown?

1 Answers
Palacios
07/30/25 4:18am
Toyota Crown locking methods: 1. Press the lock button on the car key to lock the doors; 2. Use the mechanical key to lock the doors; 3. Touch the sensor on the door handle to lock (mirrors will automatically retract when locked). When opening, the sensor detects driver's touch on the handle and the vehicle computer unlocks the door. The vehicle uses a card-type key - when the owner approaches with the card key, preset radio signals are exchanged between the card and vehicle, activating the locking system, security system and engine control system. The Toyota Crown is a mid-to-large luxury sedan with dimensions of 5020mm(length)×1805mm(width)×1480mm(height).
Was this review help?
10
4
Share
More Forum Discussions

How many kilometers are required for the Subject 3 check-in?

The kilometer requirement for Subject 3 check-in does not have a unified national standard. It varies depending on the type of driver's license. Subject 3 is one of the test subjects for the automobile driver's license examination. Below is a detailed introduction about the automobile driver's license examination: Overview: The motor vehicle driver's license examination is an official driving skills test conducted within the territory of the People's Republic of China to obtain the legal right to drive motor vehicles. Upon passing the examination, the corresponding registered license is obtained. Others: The Ministry of Public Security of China has published the revised "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" on its official website. According to these regulations, the content and passing standards of the driver's license examination subjects will be unified nationwide. On May 10, 2021, the Ministry of Public Security held a press conference to announce 12 convenience measures, including deepening the reform of "simplifying administration, delegating power, and improving regulation and services" in public security traffic management.
13
1
Share

How to Connect Bluetooth to Listen to Music in Volkswagen Passat?

Turn on both the mobile phone Bluetooth and the car Bluetooth, and ensure they are in discoverable mode. On the Bluetooth interface of the mobile phone, click "Search for Devices". Select the car Bluetooth displayed on the mobile phone, click on the car Bluetooth - Bluetooth Settings - Pair. If the pairing code is entered correctly, "Connected" will be displayed on the car Bluetooth shortly.
7
3
Share

How many points are deducted for stopping for more than 2 seconds during the reverse parking in Subject 2?

Stopping for more than 2 seconds during the reverse parking in Subject 2 deducts 5 points. Below is a detailed introduction about reverse parking in driving tests: Overview: Reverse parking has been a mandatory test item for obtaining a small car driver's license since 2013, mainly assessing the driver's ability to maneuver the vehicle in a confined space. Reverse parking is a key assessment point in the driver's test. It involves correctly reversing the vehicle into a parking space from both sides while in motion. Other details: The test area is 16 meters long and 6.83 meters wide. The parking space is 5.25 meters long and 2.31 meters wide. Failure to follow the designated route or sequence results in disqualification. Running over the lines or failing to park properly also leads to disqualification. Exceeding the 210-second time limit for completing the reverse parking results in disqualification. Stopping midway deducts 5 points each time.
13
0
Share

How to Adjust the Tightness of a Motorcycle Rear Brake?

First, tighten the fine-tuning screw on the brake lever, pull the cable tight from the end, and gently push the cable at the caliper connection towards the direction of tightening the caliper. Adjust the free travel distance of the brake pedal, which involves adjusting the length of the cable. Adjust the angle of the brake arm rotation. Note: When adjusting the rotation angle, it may be necessary to clean the brake drum and brake shoe lining if they are contaminated with oil.
17
5
Share

How to Turn on the Air Conditioning for Cooling in a Cayenne?

After starting the car's ignition, wait for 5-10 minutes until the water temperature rises to the normal level, at which point you can turn on the heating. Adjust the air conditioning's circulation mode to the internal circulation setting. Press the AC button to turn on the air conditioning. Set it to the cooling mode, indicated by the blue zone. Adjust the air conditioning to a suitable fan speed setting. For heating, direct the airflow towards the front and footwell areas; for cooling, direct the airflow towards the front.
15
1
Share

How to Activate the Lift Mode on Land Rover Discovery 4?

After starting the vehicle, it remains in the middle position, and the lift button is in the off state. When the speed exceeds 140km/h or the vehicle is put into sport mode, the vehicle lowers by 10mm, and the lift button remains off. Manually press the lift button, and it will stay illuminated. When the speed exceeds 40km/h, the vehicle automatically returns to the middle position. Note: If you plan to lift the vehicle with a jack, it's advisable to lock the air suspension in advance.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.