How to Locate Your Vehicle?

What to Do When One-Touch Window Control Fails?

Window one-touch control failure can be resolved by resetting the one-touch window function. The malfunction may occur due to issues with the window lifting system or a power interruption caused by the car battery recharging. One-touch window control refers to a system where the car window glass can be fully opened or closed with a single press of a button. Vehicles equipped with this feature have a two-stage window control switch: the first stage operates like a standard power window, while the second stage allows the window to automatically open or close completely with just one press and release of the button.

4

2

Share

What is the function of a voltage regulator?

The function of a voltage regulator is to stabilize the fluctuating power supply voltage that fails to meet the requirements of electrical equipment within its set value range, enabling various circuits or electrical devices to operate normally at their rated working voltage. A voltage regulator consists of components such as a voltage adjustment circuit, control circuit, and servo motor. When the input voltage or load changes, the control circuit performs sampling, comparison, and amplification, then drives the servo motor to rotate, thereby altering the position of the voltage regulator's carbon brush. Voltage regulators can be widely applied in industrial and mining enterprises, oil fields, railways, construction sites, schools, hospitals, post and telecommunications, hotels, research institutions, and other sectors where stable power supply voltage is required for electronic computers, precision machine tools, computed tomography (CT) scanners, precision instruments, experimental devices, elevator lighting, imported equipment, and production lines.

13

1

Share

How Many Kilometers Should a Gasoline Filter Be Replaced?

Gasoline filters should be replaced every 30,000 kilometers. If the fuel contains a high level of impurities, the replacement interval should be shortened accordingly. The specific replacement timing can be referred to the vehicle's manual. Gasoline filters are divided into two types: external and internal. Most vehicles use external filters, which are simple to replace—the connections between the gasoline filter and the fuel lines are secured with clips, allowing for easy removal and insertion. The primary function of the gasoline filter is to remove impurities from the fuel. It is located on the inlet side of the fuel pump, where the working pressure is relatively low, and typically features a nylon casing. For fuel-injected engines, the gasoline filter is located on the outlet side of the fuel pump, where the working pressure is higher, and usually comes with a metal casing.

13

1

Share

What Causes the Engine to Stall When Accelerating?

Reasons for engine stalling when accelerating: 1. Dirty throttle body with contaminants: This condition reduces or causes the throttle plate to stick during acceleration, leading to stalling. The solution is to clean or replace the throttle body and perform throttle matching. 2. Faulty ignition coil, open or short circuit: For ignition coil troubleshooting, when visual inspection and resistance measurement fail to provide accurate diagnosis, replace with a new ignition coil. 3. Clogged fuel filter: Restricted fuel flow during acceleration. Replacing the fuel filter resolves this acceleration stalling issue. 4. Faulty mass air flow sensor: Requires replacement. 5. Fuel pump malfunction.

10

0

Share

Can Different Car Antifreeze Be Mixed Together?

Car antifreeze should not be mixed together. Different brands of coolant contain various types of additives such as corrosion inhibitors, rust inhibitors, antifoaming agents, and dyes, each with distinct chemical compositions. Mixing them can lead to chemical reactions, causing sedimentation, scaling, and corrosion, which may harm the engine's lifespan. Antifreeze is designed to prevent the coolant from freezing during cold winter conditions, which could otherwise crack the radiator or damage the engine block. It is a specially formulated coolant containing unique additives, primarily used in liquid-cooled engine cooling systems, offering excellent properties such as freeze protection in winter, boil-over prevention in summer, and year-round anti-scaling and anti-corrosion benefits.

18

1

Share

What is the tire pressure for the Geely Emgrand GS?

The normal tire pressure range for the Geely Emgrand GS is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. This data is based on the international GBT2978-2008 standard. The Geely Emgrand GS is equipped with an active tire pressure monitoring system (TPMS), which automatically monitors tire pressure while driving. However, it does not display the specific pressure or temperature values for each tire, only the TPMS warning symbol and an abnormal tire pressure warning symbol. When tire pressure is abnormal, the Geely Emgrand GS tire pressure warning light will illuminate. Generally, a tire pressure exceeding 2.8 bar is considered too high, while a pressure below 2.0 bar is too low. Hazards of overinflated tires: Reduced friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread pattern, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overstretches tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement in various parts of the tire, causing abnormal heat due to excessive rolling; weakens the function of cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, damaging the tire bead and causing abnormal wear; multiplies friction with the ground, rapidly raising tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in a blowout. If the tire pressure monitoring indicator light (a yellow symbol with an irregular circle, no stamp on top, four small spikes below, and an exclamation mark inside) illuminates, there are generally three possible reasons: Abnormal tire pressure: Typically, an alarm is triggered when pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the system will still record the previous data, causing the tire pressure monitoring light to illuminate. Simply reset the tire pressure to resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, installed inside the tire and connected to the inflation valve, monitors tire pressure. If the sensor is damaged due to impact while driving, the tire pressure warning light will illuminate. Damaged sensors must be replaced with new ones.

3

5

Share

How to Locate Your Vehicle?

What to Do When One-Touch Window Control Fails?

What is the function of a voltage regulator?

How Many Kilometers Should a Gasoline Filter Be Replaced?

What Causes the Engine to Stall When Accelerating?

Can Different Car Antifreeze Be Mixed Together?

What is the tire pressure for the Geely Emgrand GS?

How to Replace the Antifreeze in a Buick Regal?

Where is the ignition coil relay of Nissan Teana located?

How to Turn Off the Radio in Emgrand GL?

How to Turn Off the Radio in a Sagitar?