How to Locate Your Car Position?

What Causes Severe Shaking When Stopping in D Gear on a Mondeo?

Significant continuous shaking in D gear that immediately improves when shifting to N gear may be related to aging shock absorption rubber. Specific causes: This could be due to interference between the engine, transmission, exhaust pipe, and the underbody or chassis, or aging, cracked shock absorption rubber, which transmits the engine's normal vibrations directly into the cabin. Common issues include insufficient clearance between the engine's lower part and the underbody, where neutral gear maintains some gap, but shifting to D gear causes engine displacement and direct contact with the underbody. Other causes include aging or cracked engine shock absorption rubber, deformed exhaust pipes, or aging exhaust pipe hanger rubber. Solutions: Typically, such issues can be resolved by prying open a certain part of the engine or exhaust pipe, which immediately eliminates the shaking.

2

0

Share

What is the appropriate tire pressure for the Roewe RX5?

The appropriate tire pressure for the Roewe RX5 is generally between 2.3-2.5 bar. According to the international GBT2978-2008 standard, the standard tire pressure for standard tires is 2.4-2.5 bar. In summer, it is generally recommended to follow the lower limit of the standard tire pressure, such as 2.4 bar for standard tires. However, if the car is often parked outdoors, the tire pressure can be slightly lower than the standard by about 0.1 bar to prevent tire blowouts due to high temperatures. There are generally three reasons for abnormal tire pressure: Abnormal tire pressure: Usually, an alarm will be triggered if the pressure is below 1.8 bar or above 3.0 bar. In such cases, tire inspection and pressure adjustment are necessary. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure monitoring system is not reset in time, it will continue to record the previous data, causing the tire pressure monitoring indicator to light up. In this case, simply reset the tire pressure. Damaged tire pressure sensor: The tire pressure sensor, which is used to monitor tire pressure, is directly installed inside the tire and connected to the tire inflation valve. If the sensor is damaged during driving, it can also cause the tire pressure warning light to illuminate. For sensor damage, the only solution is to replace it with a new one.

6

5

Share

What does the yellow exclamation mark on the Roewe dashboard mean?

When a yellow exclamation mark appears on the car dashboard, there are four possible scenarios: general faults, automatic transmission faults, abnormal tire pressure, and lighting faults. Below is a detailed analysis of these four situations: General Faults: A triangle with an exclamation mark inside indicates that the car's general performance, components, or functions have malfunctioned. Common issues include parking sensor failure, fuel cut-off system intervention or malfunction, external light failure, engine oil pressure sensor failure, etc. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside is the automatic transmission fault warning light, indicating that the transmission has a fault or the transmission fluid is below the normal range. The transmission fluid should be replaced promptly. Abnormal Tire Pressure: An exclamation mark inside a horizontal line under a bracket represents the tire pressure monitoring warning light. This light turns on when the car's tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling that a car light has malfunctioned. Solution: Visit a 4S shop as soon as possible for inspection and repair, or conduct a self-check. Focus on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue. Additionally, a red exclamation mark inside a circle with brackets indicates a brake system warning, primarily signaling brake system failure or low brake fluid levels. Immediate inspection of the brake system is required to avoid accidents.

1

3

Share

Reasons Why an Automatic Car Doesn't Move When in D Gear and Accelerator is Pressed

If an automatic car doesn't move after shifting to D gear and pressing the accelerator, it is likely caused by the following reasons: 1. Sensor error: The transmission shift valve position sensor signal is incorrect, causing the vehicle to fail to recognize the current gear; 2. Transmission malfunction: Issues with the shift valve, incomplete gear engagement, blocked oil passage; failure of the transmission solenoid valve and electronic module; insufficient transmission fluid or low internal oil pressure; 3. Brake malfunction: Brake lock-up preventing the wheels from moving forward, accompanied by abnormal noises when accelerating; parking brake not released or not fully released; engine failure.

9

0

Share

What to do if the left turn signal is not working?

Left turn signal not working, the method for making a left turn: 1. Left turn and straight are separate lanes: If there is a dedicated left turn signal, it is a violation. If the left turn signal and straight signal light up together, then a green straight signal means the left turn is also green. If the signal is broken and the left turn signal does not light up, you can still make a left turn, this does not count as running a red light; 2. Left turn + straight shared lane: If there is no left turn signal, making a left turn is not a violation; 3. Penalty: There are no detailed provisions in the "Road Traffic Safety Law of the People's Republic of China" for not driving in the prescribed lane, but Article 90 stipulates: If a motor vehicle driver violates the road traffic safety laws and regulations regarding road traffic rules, they shall be given a warning or fined not less than 20 yuan but not more than 200 yuan.

4

Share

What is the difference between WSBK and MotoGP?

Here are the differences between WSBK and MotoGP: 1. Regulations: MotoGP and WSBK follow two different sets of technical rules, both established by Dorna and governed by FIM. MotoGP has fewer restrictions, allowing manufacturers more freedom in designing engine structures and chassis. Modern MotoGP bikes extensively use ultra-light and highly specialized materials such as carbon fiber, titanium, and magnesium alloys. 2. Minimum weight: The weight limit for MotoGP is 157Kg, while WSBK has a limit of 168Kg.

15

1

Share

How to Locate Your Car Position?

What Causes Severe Shaking When Stopping in D Gear on a Mondeo?

What is the appropriate tire pressure for the Roewe RX5?

What does the yellow exclamation mark on the Roewe dashboard mean?

Reasons Why an Automatic Car Doesn't Move When in D Gear and Accelerator is Pressed

What to do if the left turn signal is not working?

What is the difference between WSBK and MotoGP?

Where is the rearview mirror heating switch located on the Tiggo 8plus?

What are the original spark plug models for the Roewe RX5?

What does the yellow triangle exclamation mark on the dashboard mean?

Does the Fista have remote one-touch window lowering?