How to Locate a Mercedes-Benz Car Using a Mobile Phone?

2 Answers
Fred
07/24/25 8:20pm
Methods to locate a Mercedes-Benz car using a mobile phone: 1. Activate the Intelligent Interconnect Service; 2. Bind the mobile phone with the car to enable vehicle location; 3. If the vehicle is unlocked and the mobile phone is not nearby, the mobile app will emit a warning sound. In addition to the mobile phone location feature, Mercedes-Benz cars also allow users to check the vehicle's status via a mobile phone, including driving mileage, remaining fuel, fuel consumption, range, driving route, etc. The Mercedes-Benz G-Class has body dimensions of 4857mm in length, 1931mm in width, and 1962mm in height, with a wheelbase of 2890mm, positioning it as a mid-to-large SUV. The Mercedes-Benz G-Class is powered by a 4.0T twin-turbocharged engine, paired with a 9-speed automatic transmission (with 1 reverse gear), which shifts faster than a 7-speed automatic transmission. It delivers a maximum horsepower of 421PS and a maximum torque of 610Nm, with a top speed of 210km/h and an official 0-100km/h acceleration time of 5.9 seconds.
Was this review help?
11
3
Share
DelaneyDella
08/11/25 11:06am
Speaking of using mobile phone positioning for Mercedes-Benz cars, I’m quite familiar with the Mercedes me APP. As a frequent Mercedes driver, here’s some practical experience: First, download the official Mercedes APP to your phone, available for both iOS and Android, and register a free account. Then, follow the prompts to pair your vehicle, usually by entering the VIN or scanning a QR code—it only takes a few minutes. Once paired, tap the map button in the APP, and the car’s location will appear immediately, making it easy to find if you forget where you parked, like in a shopping mall. This feature relies on GPS and the car’s network, offering high accuracy with minimal error. An added bonus is the ability to remotely unlock the car or adjust the AC temperature, which is pretty cool. Just remember to keep the APP updated and maintain the vehicle’s online subscription service (some premium features may cost extra), otherwise, the connection might be unstable. I recommend new owners give it a try—it’s high-tech and saves time. It’s made outings much smoother, with vehicle status clear at a glance. The setup is simple; just follow the tutorial the first time, and you’ll be good to go. Mercedes really nailed this thoughtful design.
Was this review help?
9
2
Share
Expand All
More Forum Discussions

Why does the Boyue shake when starting cold?

The reasons for the Boyue shaking when starting cold include low temperature, inaccurate air-fuel mixture ratio, severe carbon deposits, and ignition coil failure. Taking the inaccurate air-fuel mixture ratio as an example: it exists in both open-loop and closed-loop control. If the car's computer makes a judgment error, its control over the air-fuel mixture and ignition timing through the actuators will be inaccurate, thereby reducing the car's power output and causing shaking. The Boyue is a model under Geely Auto, with body dimensions of 4519mm in length, 1831mm in width, and 1694mm in height, and a wheelbase of 2670mm. In terms of appearance, the Boyue's front face design follows Geely's family-style "water ripple" grille. Considering the sense of power of an SUV, the designer reduced the number of grids, making the overall look more concise and the edges more distinct.
8
2
Share

How to Determine if the Timing Chain is Stretched?

It is impossible to determine if the timing chain is stretched by yourself, but a 4S dealership can read the crankshaft sensor and camshaft sensor. If there is an alarm indicating operational delay, it may indicate a potential issue with the timing chain stretching. The timing chain works by connecting the sprockets of components such as the crankshaft and camshaft with a high-strength metal chain, ensuring synchronized operation. Due to the high-speed movement between metal parts, wear is rapid and temperatures are high, necessitating the design of an appropriate lubrication system for cooling and lubrication. Additionally, the use of timing chains in engine design also presents the issue of friction noise between metal parts. To address this, manufacturers must take various measures, such as designing optimized chains.
20
5
Share

How to Detect When the Battery is Fully Charged?

Detecting when the battery is fully charged can be determined by the charging time. Typically, a household car battery has a capacity of around 60Ah, and the required charging current is one-tenth of the battery capacity, which is 6A. Charging at this current usually takes about 3 to 5 hours to fully charge the battery. If a lower current is used for charging, it may take around 10 hours to fully charge. A battery, also known as an accumulator, is a type of cell that works by converting chemical energy into electrical energy. It mainly consists of lead and its oxides as electrodes, with a sulfuric acid solution as the electrolyte. Types include lead-acid batteries, nickel-iron batteries, and nickel-cadmium batteries.
2
1
Share

Where to Find the Tire Pressure Markings on Tires?

Tire pressure markings can be found on the sidewall of the tire. These markings typically indicate the maximum load capacity of a single tire and the maximum safe inflation pressure under normal conditions. For example, if the sidewall reads MAX.PRESS.350kPa, it means the maximum safe inflation pressure for the tire under normal conditions is 350kPa. Similarly, MAX.Load615KG indicates the maximum load capacity of a single tire is 615KG. The normal tire pressure range is generally between 2.3 to 2.5 bar, but the standard pressure may vary depending on the vehicle model. Additionally, tire pressure can be influenced by seasonal temperature, driving conditions, and vehicle load.
18
1
Share

How Many Times Can a Cross-Province Temporary License Plate Be Applied For?

Cross-province temporary license plates can only be applied for once. Temporary license plates mainly come in two types: temporary license plates for use within an administrative jurisdiction and temporary license plates for use across administrative jurisdictions. Temporary license plates for use within an administrative jurisdiction can be applied for three times, each time valid for 15 days. However, temporary license plates for use across administrative jurisdictions can only be applied for once, with a validity period not exceeding 30 days. Documents required for obtaining a temporary license plate: Identity proof of the vehicle owner and the agent; proof of the vehicle's origin; the whole vehicle factory certificate for domestically produced motor vehicles or the import certificate for imported motor vehicles; and the vehicle identification number (frame number) and engine number rubbing mold. After reviewing the above documents and ensuring they comply with regulations, and after passing the safety and technical performance inspection of the vehicle, the vehicle management office will issue a temporary driving license plate, specifying the validity period and the start and end locations. Notes on vehicle license plates: If the owner chooses to receive the license plate by mail, it will take longer for the license plate to arrive, typically 3-4 days for mailing. Therefore, while waiting for the official license plate, it is important to pay attention to the validity period of the temporary license plate. Once the temporary license plate is about to expire, it is necessary to promptly apply for a replacement.
16
0
Share

How to Start on a Slope with Manual Transmission and Electronic Handbrake?

The method for starting on a slope with manual transmission and electronic handbrake is: 1. Press the handbrake button to engage the handbrake and hold the car, then shift into 1st gear; 2. Slowly lift the clutch pedal with your left foot, and once the clutch pedal reaches the engagement point, pause briefly; 3. At this point, gradually press the accelerator pedal with your right foot, and when you feel the car has a forward momentum, release the electronic handbrake. The electronic handbrake is a technology that achieves parking brake through electronic control. Its working principle is the same as that of a mechanical handbrake, both relying on the friction generated between the brake disc and brake pads to control parking braking, except that the control method has changed from the previous mechanical handbrake lever to an electronic button. Manual transmission refers to a manual gearbox (MT), also known as manual transmission, where the gear lever is manually operated to change the gear meshing device inside the transmission, altering the transmission ratio to achieve gear shifting.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.