···
Log in / Register

How to Lift Windshield Wipers in Snowy Weather?

4 Answers
DelEloise
09/07/25 5:13am

In snowy weather, it is advisable to lift the windshield wipers. However, when lifting the wipers, be cautious because after turning off the engine, the wipers automatically return to their lowest position, making it impossible to lift them. To resolve this, switch the wipers to maintenance mode so they stop at their highest position, allowing you to lift them. Once lifted, ensure the wipers are secure and won't snap back down to avoid damaging the windshield. Additional details are as follows: 1. After snowfall, use the wipers to clear snow from the windshield. If the wipers were not lifted beforehand, they may freeze to the windshield. 2. In snowy conditions, using the wipers to clear snow is difficult. Forcing them to operate can lead to severe consequences such as wiper deformation, rubber blade damage, or motor burnout.

Was this review help?
15
2
Share
StAnastasia
09/19/25 4:32am

Lifting the wipers on a snowy day is actually quite simple, but safety must be prioritized. First, ensure the car's engine is completely turned off, as the wiper arms might accidentally activate and cause injury during the operation. Then, locate the base of the wiper arms near the bottom of the windshield, where there's usually a small movable joint. Gently grip the wiper arm and slowly lift it to a vertical position, keeping it slightly away from the glass. Avoid using excessive force to prevent damaging the wiper rubber or scratching the glass. In cold winter weather, this practice prevents the wipers from freezing to the windshield, making snow removal easier and extending their lifespan. If you own a premium vehicle, it might feature a "maintenance mode" that automatically raises the wipers when activated from inside the car—super convenient. In short, make it a habit to do this before snowfall or after parking to avoid regrets when heading out late at night.

Was this review help?
16
1
Share
Expand All
LouisDella
11/02/25 4:53am

I noticed many people forget to lift their wiper blades in snowy weather, which is actually a crucial habit. The main purpose is to prevent the rubber components from freezing stiff onto the windshield—otherwise, forcing them loose could damage the wiper blades, and replacements aren’t cheap. The steps are simple: after turning off the engine, stand in front of the car and slightly raise the wiper arms. They don’t need to be vertical at 90 degrees; just lift them enough to create a gap from the glass to avoid being weighed down by snow buildup. I also recommend doing this every time you park outside in cold conditions to minimize wiper wear and avoid repair hassles. Additionally, check if the wiper blades are worn—replacing them with new rubber strips in winter is ideal for more efficient snow clearing. Developing small preventive habits like this can significantly extend your car’s longevity.

Was this review help?
5
4
Share
Expand All
DelSimon
12/16/25 4:57am

How to lift the wipers in snowy weather? I'm just an ordinary car owner and didn't know at first. Turn off the engine, don't touch anything while it's running. Walk to the front of the car, grab the middle of the wiper arm and gently lift it up—not too forcefully, place it vertically with a soft motion. This way the wipers won't stick to the glass, making it easier to clean after snow covers them and preventing them from freezing together. It's simple to do, just practice a few times in normal conditions and you'll get used to it.

Was this review help?
12
1
Share
Expand All
More Forum Discussions

What are the disadvantages of a horizontally opposed engine?

The horizontally opposed structure is relatively complex, and there are issues such as oil lubrication that are difficult to resolve. Due to gravity, the horizontally positioned cylinders cause oil to flow to the bottom, leaving one side of the cylinders inadequately lubricated. The high-precision manufacturing requirements also lead to higher maintenance costs. Additionally, the wider engine body makes it less favorable for layout. Introduction to automotive engines: 1. The automotive engine is the device that provides power to the vehicle, serving as the heart of the car and determining its power, fuel efficiency, stability, and environmental friendliness. 2. Depending on the power source, automotive engines can be categorized into diesel engines, gasoline engines, electric vehicle motors, and hybrid engines, among others.
7
5
Share

Correct Parking Sequence for Automatic Transmission Vehicles

Automatic transmission parking sequence is as follows: 1. After entering the parking space, first press the brake and shift to N gear, then engage the handbrake, release the foot brake and turn off the engine, finally shift to P gear and remove the key. 2. Automatic transmission, as the name implies, means the driver does not need to manually shift gears - the vehicle will automatically select the appropriate gear based on driving speed and traffic conditions. 3. The gear shifting method for automatic transmission vehicles: first turn on the power without starting the engine, then press the brake and shift gears - not directly to D gear but first to N gear before ignition, then shift from N to D gear, release the handbrake, lift the foot brake and start moving.
4
4
Share

What is the valve clearance for the 465 engine?

The intake valve clearance for the 465 engine is 0.20mm, and the exhaust valve clearance is 0.25mm. The following is an introduction to engine-related content: 1. Energy conversion: An engine is a machine that can convert other forms of energy into mechanical energy, including internal combustion engines (reciprocating piston engines), external combustion engines (Stirling engines, steam engines, etc.), jet engines, electric motors, etc. For example, an internal combustion engine typically converts chemical energy into mechanical energy. 2. Device: An engine can refer to both the power generation device and the entire machine including the power device (e.g., gasoline engines, aircraft engines). The engine was first developed in the UK, so the concept of the engine originates from English, and its original meaning refers to "a mechanical device that generates power."
20
1
Share

Does Replacing the Rear Bumper Affect the Car?

Replacing the rear bumper does affect the car, but the impact is minimal. The function of a car bumper: A car bumper is a safety device designed to absorb and mitigate external impacts, protecting the front and rear of the vehicle. Many years ago, car bumpers were made of steel plates stamped into channel steel, riveted or welded to the frame longitudinal beams, leaving a significant gap between the bumper and the body, which looked quite unattractive. Methods to prevent bumper damage: The corners of the bumper are the most vulnerable parts of the car's exterior. Drivers with poor spatial awareness may easily scrape these corners, leaving them covered in scratches. To protect these areas, corner rubber guards can be used—simply attach them to the corners of the bumper.
20
0
Share

What causes abnormal noise when starting with a dry dual-clutch transmission?

There are three main reasons for abnormal noise when starting with a dry dual-clutch transmission. Bearing wear and damage: When a bearing is damaged, it cannot operate normally, resulting in abnormal noise and even damaging the transmission components, which can worsen the issue. This can be caused by wear on transmission components or the use of replacement parts with insufficient precision, such as excessive clearance between worn or new gears and the original gears. Poor lubrication: In this case, the corresponding lubricant should be replaced; otherwise, it will accelerate transmission wear and shorten its service life. Loose transmission bolts: Vibrations during use can loosen the bolts, so regular inspections are recommended.
16
5
Share

Will speeding on national highways always be captured by cameras?

Speeding on national highways will always be captured by cameras. Definition of speeding: Driving at 45 km/h on a road with a speed limit of 40 km/h falls within the range of exceeding the speed limit by 10% to 20%. According to the new traffic regulations, for violations where the speed exceeds the limit by less than 50% on a road with a speed limit of 40 km/h, traffic police will only issue a warning without imposing a fine or deducting points. Precautions for driving: When driving, it is necessary to observe the speed limit indicated by roadside signs, markings, and other indicators. Additionally, always monitor the speedometer on the vehicle's dashboard to avoid committing speeding violations.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.