How to lift up the wiper of Nissan New Sylphy?
4 Answers
The method to lift up the wiper of Nissan New Sylphy is: 1. Do not manually force it, first operate the wiper switch by turning it to the lower right; 2. At this time, you can see that the wiper of the New Sylphy has three directions to turn: upwards, lower right, and towards the center console; 3. After turning the wiper switch to the lower right, the wiper will default to swinging to the center; 4. At this point, you can lift up the wiper. The length, width, and height of the Nissan New Sylphy are 4641mm, 1815mm, and 1450mm respectively, with a wheelbase of 2712mm. The body type is a 4-door, 5-seater sedan, and the transmission is a CVT continuously variable transmission.
I recently lifted the wipers on my Sylphy, mainly to prevent them from freezing before washing the car. The method is quite simple: first, completely turn off the engine, wait a few seconds for the system to power down, then quickly push the wiper control lever upward or press it downward—the direction depends on the model manual. For the new Sylphy, it's usually an upward push. At this point, the wipers will automatically enter maintenance mode and stop midway, allowing you to easily lift them. This trick is designed to prevent extra wear caused by winter freezing or aging wiper blades during car washes. The Sylphy is quite user-friendly in this regard, as no tools are needed. If the operation fails, it might be due to mistiming or insufficient battery power—restart the car and try again, but avoid forcing the wiper arms to prevent damage. Regular maintenance like this can extend the lifespan of the wiper blades and make car washing more convenient.
As a DIY car owner, I researched the steps to lift the wipers on the Sylphy, with the key being to enter maintenance mode. After turning off the engine, operate the wiper control lever within ten seconds—for the new Sylphy, it's recommended to push it toward the steering wheel to keep it in the lifted position. At this point, gently lift the wiper arm to raise it. The entire process requires no tools and avoids damage to the wiper blades or windshield. Note that for models with automatic wipers, do not attempt this while driving; only perform the operation when parked safely. Doing this a few times during regular car washes or seasonal maintenance can help reduce wear. Other cars may have similar features, but Nissan's design is more thoughtful—once you get the operation right, there won't be any issues. Practice a few times to get familiar with it.
If it's your first time doing this, don't be nervous. The operation is very simple: turn off the car engine, wait five or six seconds for the power to completely cut off, then immediately push the control lever upward. This will automatically stop the wipers, and then you can gently lift the wiper arm. The maintenance mode of the new Sylphy is designed to be very convenient, precisely to avoid damaging components by pulling hard. Once lifted, it's safer for washing the car or removing snow, and the wiper blades are under less pressure. I was also worried about messing it up at first, but after trying, I found it super easy—there are even diagrams in the manual. Remember to only operate on flat ground, and don't forget to regularly check and replace worn wiper blades.
