How to Lift Up the Wiper Blades on the Sylphy?

1 Answers
LaPiper
07/29/25 9:09pm
The method to lift up the wiper blades on the Sylphy is: 1. Press the ACC switch to power on the vehicle; 2. Quickly push the wiper switch upward twice; 3. Lift the wipers from the middle position. The Sylphy is a compact 4-door 5-seater sedan with body dimensions of 4631mm in length, 1760mm in width, 1503mm in height, and a wheelbase of 2700mm. It is equipped with a 1.6L naturally aspirated engine and a 5-speed manual transmission, delivering a maximum power of 90 kW and a maximum torque of 155 Nm. The drivetrain is front-wheel drive, with a MacPherson strut front suspension and a torsion beam rear suspension.
Was this review help?
20
2
Share
More Forum Discussions

Why Do Motorcycles Experience Death Wobble?

The cause of death wobble is generally an unreasonable weight distribution between the front and rear of the motorcycle, where the rear carries too much load, making the front too light. When encountering bumps or unstable road conditions, this can trigger the motorcycle's death wobble. Here’s more about death wobble: 1. Definition of Death Wobble: When the intensity of speed wobble or tank slapping becomes too great, the rider completely loses control, potentially being thrown off, and the bike falls—this is called Death-wobble. 2. Consequences of Death Wobble: Once death wobble occurs, it is almost unavoidable, making it extremely dangerous.
8
4
Share

What is Clutch Free Play?

Clutch free play refers to the preset gap between the release bearing and the release lever when the clutch is engaged. Its purpose is to prevent clutch slippage caused by the inability of the release lever to move backward after the clutch driven disc wears thin. The following is an introduction to the clutch: 1. Clutch location: The clutch is located inside the flywheel housing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch serves as the input shaft of the transmission. 2. Clutch operation method: While driving, the driver can press or release the clutch pedal as needed to temporarily disconnect or gradually engage the engine with the transmission, thereby cutting off or transmitting the engine's power input to the transmission.
6
1
Share

How to Replace the Battery in a Buick Envision Key Fob?

Buick Envision key fob battery replacement steps are: 1. Press the button on the transmitter to release the key. 2. Insert a flat tool into the bottom of the transmitter to separate it into two halves. 3. Press the battery and slide it toward the bottom of the transmitter to remove it. 4. Insert the new battery with the positive side facing the back cover. Press the battery down until it snaps into place. 5. Reassemble the battery cover by pressing it back together. Additional notes: 1. When replacing the battery, avoid touching any circuits inside the transmitter. Static electricity from your body may damage the transmitter. 2. The battery model for the Buick Envision key fob is CR2032.
12
0
Share

What is coasting in neutral while driving?

Coasting in neutral while driving refers to the operation method where the driver shifts the gear lever into the neutral position while the vehicle is in motion, disengaging the clutch between the engine and the drive wheels, allowing the vehicle to move by inertia. Some car owners, for convenience, shift into neutral when going downhill, relying solely on brakes to control speed, which poses significant safety risks. If this is done on a long downhill slope, the braking system may overheat and suddenly fail, leading to an accident. The correct approach is to engage the appropriate gear based on the actual speed, utilizing engine braking, and occasionally supplementing with brakes. This method is both safer and extends the lifespan of the braking system.
15
3
Share

Advantages of CVT Transmission?

CVT Transmission has the following advantages: 1. CVT can compensate for transmission losses, allowing the engine to always operate at its highest efficiency, thereby reducing fuel consumption and emissions. 2. CVT operates smoothly without the jerking sensation caused by gear shifts. 3. CVT has fewer failures and lower usage costs. 4. CVT has 25% fewer moving parts compared to other transmissions. 5. CVT is more affordable, but repairs can still be expensive. 6. CVT transmission fluid requires less frequent changes than automatic transmissions. 7. CVT transmission supports power output of any torque size.
12
2
Share

What is the purpose of windshield washer fluid?

Windshield washer fluid serves the following purposes: 1. Cleaning performance: Windshield washer fluid is formulated with various surfactants and additives. Surfactants typically have functions such as wetting, penetrating, and solubilizing, thereby achieving the effect of cleaning and removing dirt. 2. Anti-freeze performance: The presence of alcohol and ethylene glycol in windshield washer fluid significantly lowers the freezing point of the liquid, providing anti-freeze properties and quickly dissolving frost and ice. Additional information about windshield washer fluid: 1. Windshield washer fluid is commonly known as car windshield cleaning fluid and is considered a consumable in automotive use. 2. High-quality windshield washer fluid mainly consists of water, alcohol, ethylene glycol, corrosion inhibitors, and various surfactants.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.