How to Lift Up the Windshield Wiper?
2 Answers
The method to lift up the windshield wiper is: 1. Turn off the engine or power; 2. Push the wiper switch towards the steering wheel; 3. Once the wiper blade automatically moves to the middle position, you can manually lift it up. The method to replace the wiper is: 1. Lift the wiper arm from the windshield and keep it perpendicular to the windshield; 2. Press the tab and remove the old wiper blade; 3. Insert the new wiper and rotate it until the hook snaps into place. The functions of the wiper include: 1. Helping the vehicle maintain a safe distance from the centerline of the left lane; 2. Assisting the driver in determining the position of the left wheels; 3. Helping to judge the position of the right wheels; 4. Aiding in estimating the distance between the right side of the vehicle and the roadside; 5. Assisting in parallel parking; 6. Removing raindrops and dust attached to the vehicle's windshield.
As a seasoned driver with over a decade of experience, I always lift my windshield wipers before winter to prevent freezing. The process is simple: first, turn off the engine and ensure the car is completely powered down to avoid accidental wiper activation, which could injure someone or damage the motor. If your car has a service mode, refer to the user manual or look up an online tutorial—for example, quickly flicking the wiper stalk to the washer position for a few seconds after turning off the engine will park the wipers upright in the middle. If not, manually lift the wiper arms to a vertical angle, doing so gently and slowly to avoid scratching the windshield or damaging the springs. I always take the opportunity to check the rubber blades for cracks or hardening and apply de-icer spray if needed to prolong their lifespan. The whole process takes just a minute or two, but remember never to do it with the engine running—safety first. This small maintenance habit saves a lot on repair costs, especially in northern regions where winter freezing is common.
