How to Lift Up the Car Wiper?
2 Answers
Here are the steps to lift up the car wiper: 1. Start the vehicle; 2. Turn off the engine again, and within one minute after turning it off, quickly push the lever on the right side of the steering wheel upward twice; 3. The wiper will then stop in the upward position, entering maintenance mode; 4. Next, you can manually lift the wiper until it is in a vertical position relative to the car, completing the operation of lifting the wiper; Wiper maintenance methods are as follows: 1. Regularly replenish the cleaning fluid in the windshield washer reservoir. If the wiper is not used for a long time, it may become deformed due to pressure, causing issues such as shaking, noise, and incomplete cleaning during the first few cycles of operation. These problems will disappear after continuous use, which is normal. 2. After each use of the wiper, it is best to lift the wiper arm once after parking and return the wiper to its original state. The wiper blade should be almost perpendicular to the glass to reduce the probability of rubber deformation.
From my over ten years of driving experience, lifting the wiper blades vertically is actually a practical technique aimed at protecting the wiper blades from damage. It's especially useful before car washes or in snowy conditions to prevent freezing or scratching the windshield. Here's how to do it: first, turn off the engine and wait for the wipers to automatically return to their resting position at the bottom. Then, gently grasp the base of the wiper arm and lift it upward—this will position the wiper vertically and keep it stable. Avoid using excessive force to prevent damaging the motor or other components. Different car models may have slight variations; for instance, my older car allows direct lifting, while newer models might require turning the ignition knob to a specific mode. This method is also handy during regular maintenance, making it easier to replace wiper blades or clean them. I recommend checking the wiper arm connections monthly for any looseness to prevent wear and tear from affecting safety. In short, these simple steps can save you hassle and money while extending the lifespan of the components.
