How to Lift Up Car Wipers?
3 Answers
Here are the steps to lift up the wipers: 1. Turn off the engine or power supply of the car; 2. Within 10 seconds, pull the wiper switch toward the steering wheel (windshield washer operation); 3. The wipers will automatically move to the middle position of the windshield, at which point you can manually lift them up. 4. After turning on the power, press the wiper switch once to automatically reset them. Here are some precautions for using wipers: 1. Always turn off the windshield wipers in dry weather! 2. Avoid frequently cleaning the wiper blades, as this can damage the graphite layer and may cause noise. 3. When replacing wipers or lifting them up, always remember to turn off the power, otherwise the wipers may swing and cause injury. 4. If there are stubborn or hard contaminants on the windshield, clean them manually. These substances can easily damage the wiper blades, resulting in poor wiping performance. In severe cases, the wiper motor may also be affected. 5. When lifting the wiper blades during car washing or routine cleaning, hold the "backbone" of the wiper blade and gently place it back. Do not let it snap back abruptly.
As a veteran driver with twenty years of experience, I must tell you that setting the wipers upright isn't difficult, but you need to know the trick. First, make sure the car is turned off and the key is removed. Then, within a few seconds after turning off the engine, operate the wiper stalk near the steering wheel to make the wipers stop in the middle of the windshield. At this point, you can gently lift the wiper arm by hand. Never do this while the engine is running, as the wipers might snap back violently and damage the motor or blades. Especially in winter, this prevents the wipers from freezing and avoids blade tearing when starting the car in the morning. Different car models have slightly different procedures—for example, Japanese cars allow direct operation after shutdown, while some German cars require turning the key to the ACC position before operating the wiper switch. Regularly check the condition of your wiper blades and replace them when worn to maintain clear visibility. In short, maintaining a car is like maintaining a household—being meticulous saves money.
Friends, if you're a new driver, let me guide you step by step on how to safely position your wipers. First, make sure the car engine is completely turned off. Then locate the wiper control stalk near the steering wheel - gently tap it once within 15 seconds after turning off the ignition, and the wipers will stop in the maintenance position. At this point, you can carefully lift the wiper arm upward with gentle motion, avoiding excessive force that might damage the linkage. Never attempt this operation while the wipers are running, as it risks scratching the windshield or causing personal injury. If you're unsure about the location or the wipers don't respond, don't panic - simply check your vehicle's manual or search online for model-specific instructions. Positioning the wipers upright helps prevent winter freezing and makes window cleaning easier during car washes. As a bonus tip: regularly clean debris off your wiper blades to extend their service life - it's both safer and more economical.
