How to Lift Up Car Windshield Wipers?

Can You Drive on the Highway During the Break-in Period?

You can drive on the highway during the break-in period. However, proper methods and precautions are necessary. Modern vehicles undergo a cold break-in process before leaving the factory, which primarily involves the engine being run on specialized machinery driven by an electric motor. Therefore, highway driving is permissible, but it's crucial to control both the vehicle speed and engine RPM, with the latter generally not exceeding 3,000 RPM. Precautions for driving a new car on the highway: 1. Speed Control: Although the car has undergone a cold break-in, it hasn't been broken in through actual driving. Thus, it's essential to control the speed on the highway, preferably keeping it under 100 km/h. Additionally, manage the driving duration to avoid prolonged high-speed driving, taking breaks at service areas along the way. 2. Smooth Driving: Avoid sudden acceleration and hard braking on the highway. Emergency braking not only impacts the braking system but also affects the chassis and engine. Maintain smooth driving to prevent abrupt stops, using gentle braking and preferably employing the technique of intermittent braking. 3. Proper Gear Usage: When driving on the highway, for manual transmission cars, use gears flexibly and avoid prolonged low-gear driving. For automatic transmission cars, make reasonable use of the S gear and manual mode.

11

2

Share

How to disassemble the rear seat of a Kia K3?

The rear seat back of the Kia K3 has fixed screws, and the disassembly method is mainly as follows: 1. In the gap between the seat and the backrest. 2. Use a twelve-socket wrench to remove the screws inside. 3. Then the seat can be removed. Extended content: 1. In terms of appearance. The Kia K3 fully incorporates the family-style tiger roar design language, making the exterior extremely visually impactful. The family-style grille is embellished with serrated chrome trim, combined with the sharp-looking front headlight group, it appears very aggressive. The horizontal front bumper is a common design for current sports cars, which can significantly stretch the visual width and make the visual effect more sporty. 2. In terms of interior. The Kia K3 retains the center console design of the overseas version of the K3, including the new-style multifunctional steering wheel, floating center console screen, air conditioning vents, and center console panel. In addition, the domestic K3 has been optimized in some configurations, such as using an electronic handbrake to replace the mechanical handbrake of the overseas version, and the new car is also equipped with rear air conditioning vents.

19

2

Share

How to Use Android Screen Mirroring in BMW Cars?

First, open the phone settings, find the device connection, then locate and click on the wireless screen mirroring option, and wait for the system to search for the car's code. Meanwhile, click on the multimedia option on the central control screen, select the mobile device, and then choose the new device. Next, select screen sharing, and after clicking, the car's code will be displayed. At this point, the same code will also appear on the phone. Then select it, and after selection, the central control screen will display whether to connect. Choose to connect, and the connection will be successful. Once connected, the phone screen will be successfully mirrored onto the central control screen. The advantage of screen mirroring is that it makes it easier for us to watch movies, videos, etc. Next, let's focus on how to connect an Apple phone to CarPlay and what to do if the connection fails. First, find the mobile device in the car's multimedia system, select the new device, and click on the Apple CarPlay option. Then, open the phone settings, click on the general settings, and select CarPlay. Search for the car's code, and once found, click on the corresponding code. The car will then prompt whether to confirm the connection; click confirm. At this point, the phone will require Bluetooth pairing. Note that both Bluetooth and WiFi need to be turned on simultaneously. At this stage, the phone will prompt whether to allow the phone's contacts to sync with CarPlay; click allow. The car will then display "Do you wish to use Apple CarPlay?" Many people select the top option here, which is why many fail to connect. The correct choice is the bottom option: "Confirm prompt and connect with CarPlay." After clicking, the phone will ask "Do you want to use CarPlay?" Select "Use CarPlay." This will successfully connect to CarPlay. If CarPlay fails to connect, it is recommended to try connecting with a different phone or restart the phone and follow the above steps again. If it still doesn't connect, try pressing and holding the car system's volume button until the system turns off and restarts, which may resolve the issue. Additionally, after selecting CarPlay on the phone, you can choose to forget the car and reconnect. On the car's side, you can delete the phone device from the multimedia's mobile device list and reconnect. Following these steps will ensure a successful connection.

18

1

Share

What is the wiring method for car audio?

First, connect the power supply. Connect the positive terminal from the battery to the positive terminal of the amplifier (+12V), and connect the GND to the negative terminal. Additionally, connect the control wire (to the ACC key). Then, connect the audio source. Take the audio source from the CD player or DVD, output it from the CD player to a high-to-low frequency converter, and then connect it to the amplifier. For using car audio at home, you first need a 220V AC to 12V DC regulated power supply with a current of 3A or higher. A car CD player combines CD, radio, and amplifier functions, so you only need to buy two speakers. For better sound quality, you can purchase four speakers, but you should also consider the number of channels supported by the car CD player. Low-end car CD players only support two speakers. Speakers should be 4 ohms, which is the most common impedance for car audio. Although 6-ohm and 8-ohm speakers can be used, they may not perform well and could potentially damage the equipment. Generally, the back of a car audio system has a complex socket, and without the corresponding plug, connecting the power supply and speaker outputs can be time-consuming and labor-intensive. It is recommended to purchase the corresponding socket on Taobao based on the audio model to make wiring more convenient. Finally, for aesthetic purposes, it is advisable to prepare a casing for the audio system. For most new head units on the market, the wire colors at the rear are defined according to international standards. Yellow: 12V power supply, connected to the constant live wire; Red: Power-on wire, connected to the ACC power line controlled by the key; Black: Ground, connected to the chassis or ground wire; Blue: Radio antenna activation wire, connected to the electric antenna activation wire or antenna amplifier power supply; Blue with white stripe: Remote power-on control wire, connected to the amplifier, processor, etc.; Orange: Illumination wire, connected to the car's small light wire; Pink: Mute wire, connected to the mute control terminal of other electronic devices; White: Front left speaker positive wire; White with black stripe: Front left speaker negative wire; Gray: Front right speaker positive wire; Gray with black stripe: Front right speaker negative wire; Purple: Rear right speaker positive wire; Purple with black stripe: Rear right speaker negative wire; Green: Rear left speaker positive wire; Green with black stripe: Rear left speaker negative wire.

13

5

Share

Can an ETC card be transferred to another vehicle?

ETC cannot be used when changing vehicles: ETC is dedicated to a specific vehicle. If both the vehicle and license plate are changed, the owner should first go to the bank to unbind the original ETC-linked bank card. If the new vehicle needs to use ETC, a new ETC pass card must be applied for. When passing through the highway, if the license plate number does not match the information in the card or the tag, passage will not be allowed, and the card will be added to the issuing bank's ETC blacklist. The owner must bring their original ID card and vehicle registration certificate to the issuing bank's ETC service point to remove the blacklist. If the vehicle is changed but the license plate remains the same, simply take the ETC device to the service point to update the license plate number, engine number, and other information, then reinstall it. ETC stands for Electronic Toll Collection. To apply for ETC, the owner must provide their valid ID card and vehicle registration certificate (original and photocopy). If the application is made by a proxy, the proxy's valid ID card is also required. The photocopy of the vehicle registration certificate should include the page with the most recent annual inspection stamp. A bank card for deducting highway toll fees is also required. Applicants must be between 18 and 60 years old and own the vehicle. Here are some precautions for installing ETC: Do not obstruct the driver's view; it is best to install it behind the rearview mirror: Many car models have steeply angled windshields, which can reduce the driver's field of vision. Installing ETC without considering this may increase blind spots. Installing it behind the rearview mirror on the right side can avoid obstructing the view. Avoid affecting charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement, as it has a built-in solar panel for self-charging. Therefore, avoid installing it on the blackened areas of the windshield or where the solar panel might be blocked. Do not remove it randomly after installation: The button in the middle of the adhesive is an anti-tamper lever connected to a switch. Once installed, the windshield presses the lever in. If removed, the lever will pop out, triggering the switch and locking the electronic tag, rendering it unusable. Unlocking requires visiting an ETC service point. This mechanism prevents multiple vehicles from sharing one device. When using ETC, note the following: The ETC transaction sensing range is 8 meters. To avoid paying for the vehicle ahead due to its faulty ETC device, maintain a distance of at least 10 meters. The ETC lane recognizes vehicles at speeds of up to 20 km/h; exceeding this speed may result in failed transactions. If using a debit card linked to ETC, insufficient balance may also cause transaction failure.

10

2

Share

Does the Passat come with a panoramic sunroof?

The Passat 2019 330TSI Elite Edition to the 2019 380TSI Flagship Edition, a total of 7 models, all come with a panoramic sunroof. Below is some information about this car: 1. Exterior. The new car adopts Volkswagen's latest design language, with a large inverted trapezoidal grille connected to deep blackened headlights. The chrome trim running across the front of the car is just right, belonging to the type that looks better and more stylish the more you see it. The side profile has many changes compared to the current model, with the C-pillar lines extending to the rear, bringing a strong sense of aerodynamics and a somewhat coupe-like appearance. 2. Interior. The new Passat's center console slightly tilts toward the driver's seat, with smooth and straight lines, a neat style, and a well-organized functional button area, still carrying a strong family feel. The leather seats feature gradient diamond patterns to highlight a sense of luxury, and the rear seats of the Luxury Edition and above models come with aviation-style headrests. 3. Safety features. The new Passat comes standard with front and side airbags for the front seats, while higher-end models are equipped with rear side airbags and knee airbags. In terms of active safety, the new car comes standard with tire pressure monitoring and brake pad wear monitoring, and the Luxury Edition and above models are equipped with a blind-spot monitoring system. 3. Powertrain. The new Passat is equipped with a 1.4T and 2.0T high/low-power engine. The 1.4T engine has a maximum power of 110kW (150PS) and a peak torque of 250N·m; the 2.0T low-power model has a maximum power of 137kW (186PS) and a peak torque of 320N·m; the 2.0T high-power model has a maximum power of 162kW (220PS) and a peak torque of 350N·m, paired with a 7-speed dual-clutch transmission.

6

2

Share

How to Lift Up Car Windshield Wipers?

Can You Drive on the Highway During the Break-in Period?

How to disassemble the rear seat of a Kia K3?

How to Use Android Screen Mirroring in BMW Cars?

What is the wiring method for car audio?

Can an ETC card be transferred to another vehicle?

Does the Passat come with a panoramic sunroof?

Where is the Smart Air Filter Located?

What is the purpose of the laser lights on highways?

Can the Car Charger Be Left Plugged In All the Time?

What are the effects of low engine oil?