How to Lift the Wipers on the Tiguan?

How to Reset the Tire Pressure Light on Great Wall Ora?

Turn on the power again, then locate the SET button under the driver's seat and press it for three seconds before turning off the power. The tire pressure light will then be reset. If the tire pressure light comes on while driving, remain calm and do not panic. Immediately reduce your speed, avoid sharp steering and sudden braking, and check the tires right away.

8

1

Share

How to Reset the Power Window After Power Loss on Mazda6

After power loss, each window of the Mazda6 requires individual resetting for one-touch functionality. First, lower the window completely, then press and hold the up button. Upon reaching the top, continue holding until a click sound is heard before releasing to complete the setup.

13

0

Share

What is the secret to parallel parking with a 30cm gap?

Sit in the car and adjust the seat and mirrors, then remember how wide the 30cm gap appears in the right rearview mirror. Use a fixed reference point on the car to align with the edge line—this could be a wiper node, a hood reinforcement rib, or a specific point on the dashboard.

7

3

Share

What is the difference between explosion-proof ratings CT4 and BT4?

The differences between explosion-proof ratings CT4 and BT4 are: 1. Different levels: The explosion-proof rating of CT4 explosion-proof motors is ExdIICT4, while the explosion-proof rating of BT4 explosion-proof motors is ExdIIBT4, with a protection level lower than CT4 explosion-proof motors. 2. Different application scopes: CT has the widest range of applications. 3. Different applicable gas environments: CT is an explosion-proof rating for acetylene and hydrogen levels. If the environment contains gases such as acetylene or hydrogen, CT-level explosion-proof motors must be used. BT, however, cannot be used in workplaces with acetylene gas and is only a medium-level explosion-proof definition.

1

0

Share

What are the causes of engine noise in the Peugeot 4008?

The cause of engine noise in the 4008 may be a damaged timing chain. Here is a detailed introduction about automobile engines: 1. Overview: The automobile engine is the device that provides power for the car, determining its power, economy, stability, and environmental friendliness. Depending on the power source, automobile engines can be divided into diesel engines, gasoline engines, electric vehicle motors, and hybrid power systems. 2. Others: Common gasoline and diesel engines are both reciprocating piston-type internal combustion engines, capable of converting the chemical energy of fuel into mechanical energy for piston movement and outputting power. Gasoline engines have high rotational speeds, are lightweight, produce less noise, are easy to start, and have lower manufacturing costs. Diesel engines have higher compression ratios, greater thermal efficiency, and better economic performance and emission performance than gasoline engines.

3

5

Share

What Causes the Buzzing Sound in the Engine Compartment When Braking?

The following are three possible reasons for abnormal noise when braking: Issues with the vehicle's brake fluid: The brake fluid may be insufficient or overdue for replacement. Loose brake fluid lines could lead to leakage, causing abnormal noise in the engine compartment when braking. This situation requires professional repair at a specialized shop. Sand or debris in the brake discs: Normally, new cars shouldn't produce abnormal noise when braking. If the car hasn't been driven many kilometers and the brakes are already making noise, it’s likely due to sand or metal particles getting into the brakes. In this case, stepping on the brakes will produce a harsh sound. You can try rinsing them with a high-pressure water gun during car washing. If that doesn’t work, the brakes may need to be disassembled for cleaning. Hard brake pads: Some new cars may produce noise when braking, especially when braking lightly. This is usually because the brake pad material is relatively hard. The noise typically disappears when braking harder. Generally, this situation can be ignored until the pads have worn in after some use.

2

4

Share

How to Lift the Wipers on the Tiguan?

How to Reset the Tire Pressure Light on Great Wall Ora?

How to Reset the Power Window After Power Loss on Mazda6

What is the secret to parallel parking with a 30cm gap?

What is the difference between explosion-proof ratings CT4 and BT4?

What are the causes of engine noise in the Peugeot 4008?

What Causes the Buzzing Sound in the Engine Compartment When Braking?

How to Parallel Park by the Roadside?

How to Reset the Maintenance Light on Mitsubishi Outlander?

How to Solve the Abnormal Noise When Pressing the Accelerator?

How to Reset the Tire Pressure Light on a 2018 Hyundai ix25?