How to Lift the Wipers on a Sylphy?

1 Answers
LaHarmony
07/29/25 5:38pm
Sylphy wiper lifting method: First, press the ACC switch to power on the car, then quickly push the wiper switch upward twice. At this point, the wipers will automatically move to the middle of the windshield, allowing you to lift them from the center position. Car wipers are tools installed on the front windshield of motor vehicles to prevent rain and other debris from obstructing the driver's view. The key to ensuring wipers function effectively is maintaining sufficient moisture in the rubber wiper blades. The Sylphy is a sedan series launched by Dongfeng Nissan Passenger Vehicle Company, with body dimensions of 4641mm in length, 1815mm in width, and 1447mm in height.
Was this review help?
10
3
Share
More Forum Discussions

Are the high and low beams of the Haval H6 integrated?

Haval H6's low and high beams are integrated, sharing a single bulb, and the light transition process is built into the bulb. Introduction to Car Headlights: Commonly known as headlamps, they include low and high beams. The primary function is for nighttime driving illumination. Low beams are used for urban roads with streetlights, while high beams are for roads without streetlights or highways in rural areas. There is also a high-low beam switch used for signaling or overtaking. Introduction to Position Lights: Mainly used at night to display the width and length of the vehicle, alerting other drivers and pedestrians to its presence. When visibility is poor through the rearview mirror or during rainy or foggy weather, position lights should be turned on to enhance driving safety. Introduction to Daytime Running Lights: To avoid increasing the battery load, it is not advisable to use headlights during the day. Hence, daytime running lights were developed specifically for daytime driving to alert other vehicles and pedestrians for safety. Typically, daytime running lights use white LED lights, which are energy-efficient, not too bright, and serve as a warning.
7
1
Share

What are the symptoms of transmission problems?

Below are the symptoms of car transmission problems: 1. Gear shifting impact and shaking while driving: This situation usually occurs in manual transmission cars. When the car is driving above 40 km/h, you can release the clutch directly when shifting gears without causing gear engagement failure or jerking. Therefore, if there is impact and shaking during gear shifting and acceleration, it indicates a problem. 2. High engine speed but insufficient power during driving: If the car delays 2-4 seconds to accelerate after stepping on the throttle, it is largely because the transmission has not engaged the "gear," causing the engine to run at high speed without power. In such cases, the fault cause needs to be checked. 3. Shaking phenomenon during smooth acceleration: Sometimes during acceleration, you may feel severe shaking in the car, which may indicate that the transmission is already damaged. Under normal circumstances, smooth acceleration should not cause jerking or shaking unless there is a problem with the car parts. Therefore, such situations should be checked. 4. Weak starting and slow acceleration: Normally, a car has sufficient power when starting. After releasing the clutch, the car should reach a speed of about 10 km/h. If the car still moves slowly after fully releasing the clutch, it is very likely that the transmission has a problem. 5. Feeling the gear engagement only after 2 seconds: Delayed gear engagement is likely due to burnt forward clutch plates.
20
4
Share

What does 'trip' mean in Volkswagen?

In Volkswagen and some models of other brands, the 'trip' button corresponds to the function of trip mileage, which records the mileage of each trip. Press and hold the 'trip' button to reset (clear) the trip mileage for the current journey. Introduction to ODO: The corresponding 'odo' stands for total mileage, with the full form being odograph or odometer. The total mileage cannot be reset. Introduction to trip: The smallest unit of trip mileage is 0.1 kilometers. The basic calculation method is the fuel consumption per 100 kilometers, which is also a parameter provided by the manufacturer. It is calculated by dividing the actual fuel consumption by the actual mileage traveled. That is, the fuel consumption per 100 kilometers equals the fuel consumption (liters) divided by the mileage traveled (kilometers) multiplied by 100.
4
0
Share

What is the ground clearance of the Envision S?

Buick's midsize SUV, the Envision S, is equipped with a MacPherson independent front suspension, and its ground clearance is 18.8 centimeters. Ground clearance of family sedans: Theoretically, the minimum ground clearance of ordinary family sedans generally ranges between 11-15 centimeters. Based on this parameter, a higher ground clearance (usually above 13 centimeters) indicates relatively better off-road performance, but slightly poorer stability at high speeds. Ground clearance below certain values: If the ground clearance is below 110 millimeters, the vehicle will have stable handling on highways but poor off-road capability. Some modern cars are equipped with air suspension systems that can automatically adjust the ground clearance, perfectly balancing both stability and off-road performance.
11
1
Share

How many liters of brake fluid does the Rapid require?

Manual bleeding requires 1 liter; automatic fluid exchange machines require 3 liters. Brake fluid levels should always be maintained between the MAX and MIN marks on the reservoir. Reasons for replacing automotive brake fluid: Moisture or contaminants from air can enter through the reservoir vent, lowering the fluid's boiling point. Prolonged braking during extended drives may cause vapor lock in brake lines, resulting in reduced braking force or failure. Characteristics of automotive brake fluid: Low freezing point: maintains good fluidity in cold temperatures; extremely high boiling point; resists vapor lock under high temperatures; minimal quality deterioration; non-corrosive to metals and won't soften rubber components.
17
0
Share

Where is the origin of Audi?

Audi headquarters: Ingolstadt, an industrial city in Bavaria, Germany, located on the banks of the Danube. Main Audi models: Audi is a renowned automobile developer and manufacturer, with its logo consisting of four interlocking rings. Currently a subsidiary of Volkswagen Group, its headquarters are located in Ingolstadt, Germany. Main models include Audi A1, Audi A3, Audi A4, Audi A5, Audi A6, Audi A7, Audi A8, Audi Q1, Audi Q2, Audi Q3, Audi Q5, Audi Q7, Audi Q8, Audi TT, Audi R8, as well as the S and RS performance series. About Audi: The Audi Group includes the parent company and its subsidiaries: Audi Hungaria, quattro GmbH, Lamborghini Automobili, and Cosworth Technology, Audi Brasil, and Audi Senna. Additionally, Audi has production plants in China, Malaysia, South Africa, and other locations.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.