How to lift the wipers of the CS35?

1 Answers
DeIker
07/30/25 7:46am
To lift the wipers of the CS35: 1. Turn the key from the ON position to the OFF position, and within 5 seconds, move the wiper lever from the OFF position upward to the MIST position, holding it in the MIST position for more than 1 second; 2. The wipers will enter maintenance mode, moving upward a certain distance, allowing you to lift the wiper arms and wipers. Taking the 2017 Changan CS35 as an example, it belongs to the small SUV category, with body dimensions of length 4170mm, width 1810mm, height 1670mm, a wheelbase of 2560mm, a fuel tank capacity of 52 liters, and a curb weight of 1270kg.
Was this review help?
18
2
Share
More Forum Discussions

Is the Lynk & Co 03 1.5T a three-cylinder engine?

The Lynk & Co 03 1.5T engine is a three-cylinder engine, which provides sufficient power for the car and delivers a strong sense of acceleration. Below is more information about three-cylinder engines: 1. A three-cylinder engine consists of three cylinders arranged in a row inside the engine, sharing a common crankshaft to output power. It converts the chemical energy inside the engine into mechanical energy, transforming the heat from burning gasoline into thermal energy. This thermal energy expands within the sealed cylinders, pushing the pistons and converting thermal energy into mechanical energy. 2. The simple structure of the three-cylinder engine makes the car excel in fuel efficiency regulation. The engine's compact size and high power density result in greater thermal efficiency. Compared to four-cylinder engines of similar displacement, three-cylinder engines offer faster power response and stronger performance, especially at low RPMs.
14
1
Share

How to turn off the Roewe RX5 large screen?

Roewe RX5 large screen shutdown method is as follows: When the vehicle power is not turned on, briefly press the power button to start the system. If the system was in playback mode when the vehicle power was turned off last time, the system will automatically start up when the power is turned on again. If the system was in standby mode when the vehicle power was turned off last time or was shut down without the vehicle power being turned on, briefly press the power button on the control panel to start the system after turning on the vehicle power again. Extension: When the system is on, press and hold the power button on the system control panel for more than 10 seconds, and the system will automatically restart. When the vehicle power is not turned on, briefly press the power button to shut down the system. When the vehicle power is turned off, the system will automatically shut down. Standby mode: When the vehicle power is on, press and hold the power button for 2 seconds to put the entertainment system into standby mode, which can pause the operation of the entertainment system.
16
4
Share

How to Understand Traffic Signals?

Green means go, red means stop, and yellow warns of an impending signal change. Here is an introduction to traffic signals: 1. Green Signal The green signal indicates permission to proceed. According to the "Regulations for the Implementation of the Road Traffic Safety Law," when the green light is on, vehicles and pedestrians are allowed to proceed, but turning vehicles must not obstruct the passage of straight-moving vehicles and pedestrians. 2. Yellow Signal When the yellow light is on, vehicles that have already crossed the stop line may continue to proceed. The yellow signal's meaning lies between the green and red signals, having both a prohibition and a permission aspect. When the yellow light is on, it warns drivers and pedestrians that the passage time is ending and will soon switch to red. Vehicles should stop behind the stop line, and pedestrians should not enter the crosswalk. 3. Red Signal Stop driving.
16
5
Share

What does the NORMAL mode in a car mean?

NORMAL in a car refers to the standard driving mode, which is the most commonly used mode. In this mode, the car's performance is balanced, achieving the best compromise between fuel economy, quietness, and power performance, making it suitable for city driving. Modern automatic transmissions are designed to meet different driving requirements and adapt to various road conditions. The electronic control unit incorporates different shift logics, and a mode selection switch is provided on the control panel, allowing drivers to choose the transmission control mode. Common automatic transmission control modes include: ECONOMY mode: This control mode is designed to optimize fuel economy. When the automatic transmission operates in ECONOMY mode, the shift pattern ensures the engine runs within the most fuel-efficient speed range, thereby improving fuel efficiency. POWER mode: This control mode is designed to maximize the car's power performance. In this mode, the automatic transmission's shift pattern keeps the engine operating within the high-power range, enhancing the car's power performance and climbing ability. SNOW mode: Some automatic transmission models feature a "snowflake" button near the gear lever, which activates the SNOW mode. This mode uses programmed settings to start the transmission in second gear, ensuring smoother and gentler torque output and reducing the likelihood of tire slippage on icy roads. SPORT mode: The electronic control unit increases the engine speed to maintain sufficient torque and enhance power performance, though at the cost of higher fuel consumption. This mode temporarily boosts engine power for quick acceleration, effectively acting as an acceleration, hill-climbing, or overtaking gear. In SPORT mode, the engine speed rises sharply. Additionally, high engine speeds in SPORT mode can help clear carbon deposits, but prolonged use is not recommended as it increases transmission load, raises temperature, and accelerates wear. INDIVIDUAL mode: This mode allows drivers to customize various module responses, typically including steering wheel weight, chassis stiffness, throttle response, transmission reaction, engine mode, steering system mode, and exhaust system mode.
12
0
Share

What are the methods for starting on a slope in Subject 2?

Subject 2 slope starting methods are as follows: 1. Handbrake method: After stopping on the slope, keep the foot brake pressed, depress the clutch, and pull the handbrake tight. Ensure the handbrake can hold the car on the slope before releasing the foot brake. Press the accelerator to make the engine roar loudly, maintain the throttle, and slowly release the clutch. The engine sound will gradually weaken as the clutch is released. When the engine sound just quiets down, keep both feet still, release the handbrake, and complete the slope start. 2. Half-clutch method: When practicing this method, after stopping on the slope, lift the clutch until the car body shakes, then release the brake without pressing the accelerator. Rely solely on the clutch to keep the car hovering on the slope, and use fine adjustments to move the car forward or backward. The key to this practice is gentle and delicate footwork. 3. One-foot dual-use method: This method requires the right foot to operate both the accelerator and brake simultaneously. Generally, press the brake with the heel and the accelerator with the toe. While revving the engine, slowly release the clutch with the left foot. When you feel the car tends to move forward, lift the heel off the brake, continue to accelerate and release the clutch, completing the slope start.
5
5
Share

What is the tire model size of the Haval H6?

The Haval H6 model has two tire specifications: 235/60R18 tires and 235/55R19 tires. All Haval H6 models come with 225/65R17 tires. The numbers in the tire model indicate the load index of a single tire. The higher the index, the greater the load capacity the tire can withstand. More detailed information is as follows: 1. 235/60R18 tires: The tire width is 235mm, the aspect ratio is 60%, meaning the section height is 60% of the width, and the rim diameter is 18 inches. 2. 235/55R19 tires: The tire width is 235mm, the aspect ratio is 55%, meaning the section height is 55% of the width, and the rim diameter is 19 inches. 3. If the vehicle is severely overloaded or fitted with tires with a load index that is too low, the risk of a tire blowout increases significantly. The last letter in the tire model represents the speed rating of the tire. If the vehicle speed exceeds the speed rating of the chosen tire, the tire will be on the verge of a blowout.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.