How to Lift the Wiper of Golf 7?

2 Answers
ORebecca
09/04/25 5:38am
To lift the wiper of Golf 7, insert the key and turn it slightly to make the wiper move forward, then activate the wiper maintenance mode. Taking the 2021 Golf as an example, its body dimensions are: length 4296mm, width 1788mm, height 1471mm, with a wheelbase of 2636mm and a fuel tank capacity of 51 liters. The 2021 Golf is equipped with a 1.2T turbocharged engine, delivering a maximum power of 85kW and a maximum torque of 200Nm, paired with a 7-speed dual-clutch transmission. It features a front suspension type of MacPherson independent suspension and a rear suspension type of torsion beam non-independent suspension.
Was this review help?
20
5
Share
DiAlan
09/16/25 6:37am
I've been driving a Golf 7 for many years and always lift the wipers before washing to prevent glass scratches or motor damage. The method is: turn the key to the ON position without starting the engine; immediately push the wiper lever to the wash position once; then turn off the key; the wipers will automatically stop in the service position; at this point gently manually flip up the wiper arms. The whole process should be steady and quick, avoid operation when battery power is low. After completion, clean the wiper blades and pivot areas, regularly check blade wear, and handle blade replacement accordingly. This maintenance extends service life, especially preventing winter freezing. Remember to operate on level ground, avoid brute force, and protect vehicle safety. In practice, I find the Golf 7's design quite user-friendly – beginners will get familiar after a few attempts.
Was this review help?
18
5
Share
Expand All
More Forum Discussions

What is the fuel consumption of the WEY Mocha?

wey mocha's fuel consumption is 9.4-10.4L/100km. The currently available Mocha models include five variants: the 2021 2.0T Front-Wheel Drive Special Rich Edition, Front-Wheel Drive NOH Smart Navigation Edition, Front-Wheel Drive Special Mellow Edition, All-Wheel Drive Special Rich Edition, and All-Wheel Drive Special Mellow Edition. The official NEDC combined fuel consumption is slightly lower than the actual fuel consumption, ranging from 7.0-7.5L/100km. Among vehicles in the same class, the Lynk & Co 01 has an NEDC combined fuel consumption of 7.4-7.8L/100km, the Wildlander's NEDC combined fuel consumption is 7.4-7.8L/100km, the Mazda CX-5's NEDC combined fuel consumption is 7.4-7.8L/100km, the Kia KX5's NEDC combined fuel consumption is 6.7-7.4L/100km, and the Tang's NEDC combined fuel consumption is 9.0L/100km. A vehicle's fuel consumption is directly influenced by five major factors: driving habits, the vehicle itself, road conditions, natural wind, and environmental temperature. The specifics are as follows: Driving habits: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle before encountering a red light can increase fuel consumption. The vehicle itself: Vehicles with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements typically produce more power, requiring more gasoline to burn and perform work. Heavier vehicles also have higher fuel consumption because greater weight requires more driving torque. Road conditions: Driving on unpaved roads, muddy roads, soft surfaces, or mountainous roads increases resistance, leading to higher fuel consumption. Natural wind: Driving against the wind or on windy days increases the vehicle's resistance, resulting in higher fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily during cold starts, requiring more gasoline to be injected for combustion, which increases fuel consumption. Additionally, in low temperatures, the engine's computer controls higher idle speeds to warm up the engine, which also increases fuel consumption.
7
0
Share

How to reset the maintenance light on Audi Q3?

Ignition switch Turn off the ignition switch, shut down the engine, and hold the right button "0.0" (reset) with your left hand while turning on the ignition switch. Reset When "SERVICE" appears on the dashboard display, press the left button "SET" (setting) within 20 seconds to reset. Reset completed When "SERVICE-IN-10000MI" appears on the dashboard display, it indicates the reset is completed. Find a technician You can ask the automotive technician to reset it when replacing car parts.
11
3
Share

How to Deal with Jerking Sensation When Starting the Changan Eado?

Start the car in P gear The dual-clutch transmission oil has high viscosity. If starting in N gear, the clutch will receive higher drag torque, causing the vehicle to move slowly. No need to warm up the car After the engine starts, you can shift into gear and drive without warming up the car. If the road is clear, you can accelerate immediately to allow the transmission to shift into higher gears more quickly. Fast upshifts, slow downshifts The dual-clutch transmission shifts up quickly but shifts down slowly. When driving this type of vehicle, acceleration and deceleration must be very clear to give the transmission clear signals for shifting up or down.
20
4
Share

Does the Great Wall M2 have hidden features?

Great Wall M2 does not have hidden features. Great Wall M2 interior: The new M2 has minimal changes in appearance, but the interior changes are more noticeable, featuring a digital instrument panel that exudes a strong sense of technology. It can also display various vehicle information such as gear shift prompts and tire pressure values. Great Wall M2 configuration: The new car is equipped with Bosch 9.0 version ESP electronic stability program, 4-probe parking radar, and a visual reversing camera, significantly enhancing active safety performance. Additionally, it includes cruise control, a multifunctional leather steering wheel, a 12-speaker audio system, and an 8-inch central control LCD screen integrating MP5/GPS/Bluetooth/reversing camera functions.
20
1
Share

What Causes the Noise When Releasing the Brake Pedal?

Reasons for noise when releasing the brake pedal are as follows: If it is a squealing noise: First, check if the brake pads are worn out (the wear indicator is making noise). If the brake pads are new, check for any foreign objects caught between the brake disc and the brake pads. Uneven hardness of the brake disc or the presence of metals like copper can cause the brake pad surface to become uneven. If it is a dull noise: It is mostly due to issues with the brake caliper, such as worn guide pins or detached spring plates. If it is a hissing noise: If the hissing noise persists, check for brake drag. Poor caliper retraction can cause prolonged friction between the disc and the pad, leading to abnormal noise under certain conditions.
5
4
Share

Why is the Vezel consuming more and more fuel?

Using ethanol gasoline, frequent traffic congestion in urban areas, low winter temperatures, rapid acceleration, heavy loads, speeding, high engine oil viscosity, ultra-short distance driving, etc., can all lead to higher fuel consumption. The following are some tips to reduce fuel consumption: Good Driving Habits: Since driving habits vary among drivers, different drivers driving the same car on the same route will have different fuel consumption. Good driving habits help reduce fuel consumption. Regularly Check Parts: If air filters, fuel filters, and lubricating oil filters are not replaced for a long time, they can become clogged with impurities, affecting performance and leading to increased fuel consumption.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.