How to Lift the Wiper Blades Up?

1 Answers
JosiahAnn
07/25/25 2:15pm
To lift the wiper blades up: 1. Hold the middle part of the wiper blade and lift it upward; 2. Pull the wiper blade to the end and stand it upright. The function of the wiper blades is to remove raindrops and dust attached to the vehicle's windshield, improving the driver's visibility and enhancing driving safety. Wiper blades are blade-like structures installed in front of the windshield, consisting of a motor, reducer, four-link mechanism, wiper arm spindle, and wiper blade assembly. The characteristics of wiper blades are: 1. Heat-resistant, cold-resistant, acid and alkali resistant, and corrosion-resistant; 2. Can fit the windshield well, reducing the burden on the motor; 3. Low noise, strong water repellency, soft material that does not scratch the windshield.
Was this review help?
9
5
Share
More Forum Discussions

What number to call when blocked by another car?

When blocked by another car, you can notify the owner through the following methods: 1. Call the 114 hotline to request the owner to move their vehicle. You need to provide your license plate number and phone number to 114, along with the other party's license plate number. 114 will then notify the owner via SMS or phone call to move their vehicle. 2. Use the One-Click Vehicle Move service: This is a convenient service launched by the 12123 traffic management department. When you need a vehicle moved, using this function allows the 12123 system to automatically match the vehicle information in the database, query and retrieve the owner's phone number in the background, and then send a move notification to the owner via SMS or APP message push. 3. Dial 122 or 110 to seek assistance from the traffic-specific hotline, which will help contact the owner and inform them of the current situation. The traffic-specific hotline will then reach out to the owner.
20
3
Share

How to Replace the Key Battery for Nissan X-Trail?

Press the button on the back of the key to remove the mechanical key. Use a flat-head screwdriver to open the battery cover, revealing the battery. Replace the key battery without touching the internal circuits and electronic contacts. Ensure the positive side of the battery faces the bottom of the casing when installing it, then close the cover. Finally, test the buttons to check if the functions are working properly. Here is some related information about the X-Trail key: 1. The battery model for the Nissan X-Trail remote key is CR2025. You can replace it yourself, but be careful not to touch the internal circuits and electronic contacts during the process, as this could damage the circuits and render the key inoperable. 2. After bringing the smart key into the car, the smart key system warning light will blink for 10 seconds and then turn off. If the smart key system warning light blinks green, it indicates that the smart key battery is nearly depleted. When the smart key battery is depleted or there are strong radio waves in the operating area, the operational range of the smart key system may decrease, and the smart key may not function properly.
20
3
Share

Does the JAC Refine S3 have a heated mirror function?

The JAC Refine S3 is equipped with a heated mirror function. By rotating the mirror adjustment button to the heating position, the mirrors will automatically heat up based on the external temperature. The heated mirror function is particularly useful during rainy or snowy weather. When activated, the heater behind the mirror quickly warms the surface, gradually removing rainwater or fog, eliminating the need for frequent manual wiping by the driver and thus reducing driving hazards. How to use the heated mirror function: There are generally two ways to activate the heated mirror function. One is combined with the electric mirror adjustment button—simply rotate the knob to turn it on. The other is located on the air conditioning control panel—pressing the heating button will activate it. No manual angle adjustment is required, as the driver's side has a dedicated adjustment button. Principle of the heated mirror function: After pressing the button, the electric heater behind the mirror glass rapidly heats up to a fixed temperature within minutes, typically between 35-60 degrees Celsius. Heat is then distributed across the left and right mirrors. As the temperature rises and evaporation occurs, water droplets on the mirror surface shrink, and fog gradually dissipates, effectively defrosting the mirror. However, in heavy rain, the effect may diminish and become less noticeable. Precautions for using the heated mirror function: The heated mirror function works by incorporating electric heating wires into the mirror, which consume a significant amount of power. When using this feature, ensure the vehicle is running to avoid draining the battery, which could lead to insufficient power for starting the car. Other methods for defogging mirrors include: Opening windows for air circulation: Slightly lowering both side windows allows air to flow between the interior and exterior, reducing the temperature difference and gradually eliminating fog. Adjusting the car's air conditioning to the appropriate setting can also direct warm air toward the mirrors for defogging.
11
0
Share

What Causes Shaking When Shifting Gears in an Automatic Transmission?

Automatic transmission shaking when shifting gears occurs for the following reasons: The reason why the car body shakes violently after shifting gears in an automatic transmission car is that the gear oil in the transmission is relatively viscous and dense, and the transmission part receives the power from the engine more noticeably, causing the car to shake significantly. Once the car starts moving, the temperature of the gear oil in the transmission rises, the gear oil becomes thinner, and the density decreases, improving the situation. Additional information: The low-speed gear transmission in automatic transmission cars is almost entirely hydraulic, not gear-driven. During the first gear shift, since the car has been stationary overnight, the gear oil in the transmission is relatively viscous and dense, and the transmission part receives the power from the engine more noticeably, causing the car to shake significantly.
1
4
Share

Where is the air conditioning filter located in the new Qashqai?

Nissan Qashqai air conditioning filter location is as follows: 1. Remove the decorative panel on the right side of the driver's seat, starting from top to bottom for easier access; 2. The replacement method is the same for both 08 and 10 models, with the white obstruction in the 10 model not affecting filter replacement. The filter cover is connected to gray sealing foam, featuring a handle in the middle. The bottom of the cover has a clip - simply hook it with your finger to detach the cover. 3. Once the cover is removed, you can pull out the air conditioning filter. Note: Filters have front and back orientations. While OEM filters are marked with front/back indicators, aftermarket filters typically have an extra thin material on the short edge of the frame. The correct installation direction is with this protruding material facing outward at the top. 4. Filter installation can be challenging due to the awkward position. You may bend the filter toward the front of the vehicle during insertion. After fully inserting, pull the filter back and forth a few times to ensure proper positioning. Finally, replace the cover to complete installation.
1
3
Share

What Causes a Vehicle to Suddenly Stall While Driving?

Generally, sudden stalling while driving is caused by an empty fuel tank, electrical issues, ignition coil failure, or fuel pump damage. Here is some relevant information: 1. There are many reasons why a car may stall. If the stalling is not very sudden and the car first feels like it is struggling to get fuel, with the situation worsening until it stalls, this is mostly due to a fuel system issue. If the stalling is very sudden, it is often an electrical problem, such as a burnt-out ignition coil, a blown fuse, or damage or disconnection of key sensors. A specific diagnosis can only be obtained by taking the car to a 4S shop for inspection. 2. After discovering the stall, depending on the road conditions at the time, if there is no emergency, you can slowly apply the brakes to prevent rear-end collisions. After the speed decreases, gently steer the vehicle toward the roadside lane. Note that the brakes should be applied continuously, with increasing pressure—do not release and reapply them, as this will deplete the remaining vacuum, making it impossible to brake again.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.