How to Lift the Wiper Blades on the Volkswagen Lamando?

1 Answers
RyleeFitz
07/29/25 11:35am
To lift the wiper blades on the Volkswagen Lamando, follow these steps: 1. Turn off the car; 2. Within 10 seconds, activate the windshield washer switch; 3. Pull the wiper lever directly toward the driver; 4. After pressing the windshield washer switch, the wipers will automatically move to the center of the windshield; 5. Manually lift the wiper blades. Taking the 2021 Volkswagen Lamando as an example, its body dimensions are: length 4615 mm, width 1826 mm, height 1425 mm, wheelbase 2656 mm, and fuel tank capacity 51 liters. The 2021 Volkswagen Lamando is equipped with a 1.4T turbocharged engine, delivering a maximum power of 96 kW and a maximum torque of 225 Nm, paired with a 7-speed dual-clutch transmission.
Was this review help?
1
5
Share
More Forum Discussions

Is the 2005 Honda CR-V an imported model?

Yes. Here is the relevant information: 1. Honda CR-V: The Honda CR-V is a classic urban SUV model produced by Dongfeng Honda Automobile Company. Adhering to the development philosophy of "easy and enjoyable driving anytime, anywhere," the CR-V has won the affection of over 11 million owners in more than 160 countries since its debut 25 years ago. 2. Exterior: The new model features upgraded aesthetics, available in four body colors: Starry Night Blue, Crystal Black, Brilliant White, and Elegant Gold. The CR-V Hybrid e+ comes with blackened headlights connected to a horizontal chrome trim, creating a strong sense of layering. At the rear, a full-width chrome trim connects with LED taillights, enhancing recognition and visual width. It also features exclusive PHEV badges, fully showcasing its stylish and technological appeal.
3
0
Share

What car series is the Cerato?

Cerato belongs to the Dongfeng Yueda Kia car series. Here is the relevant information: 1. Cerato: The design of the Cerato's center console appears very simple, with each function arranged quite reasonably, allowing drivers to quickly familiarize themselves without an operation manual. The air conditioning knobs have been improved compared to the older model, now featuring stepless adjustment, precise to 0.5 degrees Celsius, enabling more accurate temperature control for the driver and passengers. 2. Engine: The Cerato is equipped with an engine that uses CVVT technology. After recalibration, it achieves a maximum output power of 82kw at 6000rpm and a maximum output torque of 145Nm at 4500rpm. This CVVT engine can automatically delay the closing and advance the opening of the valves, ensuring the most complete combustion of the fuel mixture, thereby achieving optimal power output. The Cerato 1.6L takes 11.81s to accelerate from 0 to 100km/h, slightly slower than the 1.6L Peugeot 207.
18
5
Share

Should the AOFF in an automatic transmission be kept on or off?

Automatic transmission AOFF is generally kept on. AOFF is the button to turn off the auto start-stop function in a car. Enabling the auto start-stop function can reduce exhaust emissions and save fuel, which is why many cars are now equipped with it. Here are detailed explanations about the auto start-stop function: 1. Cars equipped with the auto start-stop function have a button to turn it off. Pressing this button can deactivate the auto start-stop. The button to turn off the auto start-stop is not actually labeled as 'aoff', but rather features a circle with an 'A' inside and 'OFF' below the circle, indicating the deactivation of the auto start-stop. 2. In cars with the auto start-stop function, when waiting at a red light, the system will shut off the engine as long as the battery has sufficient charge and the engine coolant has reached the normal operating temperature. If the battery charge is insufficient, the auto start-stop system will not function.
1
5
Share

What are the reasons for a gasoline generator starting and then stalling after a while?

Gasoline generator starting and then stalling after a while can be caused by the following reasons: 1. Sensor: Disconnect the oil sensor connection line. If the gasoline engine can start, replace the oil sensor. 2. Ignition system issue: Remove the spark plug and pull-start without load, observe the spark condition. A white-red spark is normal; if there is no spark, replace the spark plug or ignition coil. 3. Fuel supply system issue: Check if the fuel has water contamination. If water is present, clean the carburetor with gasoline. Check if fuel is entering the cylinder. Inspect the fuel supply line for air leaks, and try adjusting the choke position to see if it can start. 4. Valve system issue: Remove the spark plug and tightly cover the air filter hole with your finger, then pull-start a few times. If no compressed gas rushes out, it indicates a problem with the energy conversion system or the valve system.
11
5
Share

What does PHEV mean?

Plug-in hybrid electric vehicles (PHEVs) add battery packs and electric motors to the original gasoline-powered layout, or are equipped solely with battery packs and electric motors. They charge the battery packs by plugging in, enabling the electric motor and gasoline engine to drive the vehicle simultaneously or operate in pure electric mode. Below is an introduction to plug-in hybrid electric vehicles: 1. Plug-in hybrid electric vehicles are a new type of hybrid electric vehicle. Unlike traditional hybrids that combine gasoline power with electric drive, PHEVs share the same driving principles and units as electric vehicles, with the only difference being the inclusion of an engine onboard. 2. The difference between plug-in hybrid electric vehicles and regular hybrid vehicles: Regular hybrids have very small battery capacities, supplying/recovering energy only during start/stop and acceleration/deceleration, cannot be charged externally, and cannot drive long distances in pure electric mode. PHEVs have relatively larger batteries, can be charged externally, can drive in pure electric mode, and switch to hybrid mode (mainly powered by the internal combustion engine) when the battery is depleted, while also charging the battery as needed. In practical applications, plug-in hybrids offer greater flexibility and convenience.
5
2
Share

Where is the engine control module located in a 2005 Honda Accord?

The body control module of the Honda Accord is located in the engine compartment, behind the left headlight. It is a white metal square box with two sets of multi-wire harnesses plugged into it. Here is some relevant information: 1. Engine: Equipped with a 2.4L inline 4-cylinder gasoline engine, producing 120 kW (170 hp) and 220 Nm of torque. The engine features i-VTEC technology, multi-point fuel injection, and requires 92-octane or higher gasoline. It comes with a traditional 5-speed AT automatic transmission or a 5-speed manual transmission. Body structure: Front-engine, front-wheel drive, front double-wishbone independent suspension, rear multi-link independent suspension, unibody construction, and mechanical hydraulic power steering. 2. Accord: The seventh-generation Accord produced by Guangqi Honda is the second-generation Accord manufactured domestically in China, produced from 2003 to 2007. The 2004 model was launched at the end of 2003, with engine options including a 2.0L inline 4-cylinder VVT-i engine (model K20A1), a 2.4L inline 4-cylinder VVT-i engine, and a 3.0L V6 engine.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.