How to Lift the Wiper Blades on the Tayron?
2 Answers
The steps to lift the wiper blades on the Tayron are as follows: 1. Press the start button to power on the vehicle (do not start the engine). 2. After about 5 seconds when the vehicle completes its self-check, press the engine button again to turn off the power. 3. Within 10 seconds, pull the wiper switch toward the steering wheel (the windshield washer operation), and the wiper blades will automatically move to the middle of the windshield. Then, manually lift them up. Wiper blade maintenance methods are as follows: 1. When using the wipers to remove dust from the windshield on sunny days, always spray windshield washer fluid to avoid dry wiping. 2. If there are stubborn or hard contaminants on the glass, clean them manually. 3. When lifting the wiper blades during car washing or routine cleaning, hold the "back" of the wiper blade and gently return it. Do not let it snap back abruptly. 4. In winter, use an ice scraper to remove ice from the windshield before using the wipers to avoid putting extra strain on them.
As a Tayron owner, I can tell you there's a specific procedure for activating these hidden wipers in the upright position. Within 10 seconds after turning off the ignition, immediately push the wiper stalk downward once - this will make the wipers automatically rise and stop vertically at the center of the windshield, clear of the hood. You can then gently lift the wiper arms to replace rubber blades or clear snow accumulation, which is especially useful for preventing winter freeze-ups in northern regions. After servicing, simply restart the vehicle or operate the wiper switch to make them automatically return to their parked position. Timing is crucial - missing this window will prevent the wipers from reaching the center position.
