How to Lift the Wiper Blades on the Sylphy?
4 Answers
To lift the wiper blades on the Sylphy, pull the wiper switch inward to activate the maintenance mode, which stops the wipers halfway, allowing them to be lifted. Below are detailed specifications about the Sylphy: 1. Vehicle Positioning: The Sylphy is a mid-size sedan under Dongfeng Motor Co., Ltd., with dimensions of 4641*1815*1450mm (L*W*H) and a wheelbase of 2712mm. 2. Powertrain: Equipped with a 1.6L naturally aspirated engine compliant with China's National VI emission standards, delivering a maximum power of 99kW (135 horsepower) and a peak torque of 159Nm, paired with a CVT transmission. 3. Smart Features: Features the new Nissan-Connect super-intelligent system, including an 8-inch HD capacitive touchscreen, voice control for vehicle functions (online entertainment, navigation, Bluetooth calls, dashcam, and air conditioning), and remote monitoring and control via a smart app for door locks, lights & horn, engine, and air conditioning.
I've been driving my Sylphy for over three years, and every time I replace the wiper blades, I have to first raise the wipers. The key is to operate immediately after turning off the car. Within 10 seconds, push the control lever all the way down and hold it for three to four seconds—the wipers will automatically rise to the middle position, making it easy to lift them. Last time during heavy snowfall, I raised them in advance, which effectively prevented them from freezing to the windshield. Remember to place a soft cloth on the windshield to avoid damage from rebound. However, procedures may vary by model year, so it's best to check the manual to confirm the steps. Avoid forcing the wiper arms to prevent motor damage.
Last week, I learned how to set the wipers upright when replacing the wiper blades on my Sylphy. It only works if you act immediately after turning off the engine. First, ensure the car is completely powered off, then quickly press and hold the wiper lever on the right side of the steering wheel downward. You'll soon hear the motor sound, and the wipers will stop in the upright position. This makes it easier to operate the wrench during replacement without touching the edge of the hood. Remember to clean any sand or gravel from the wiper arms before starting, and gently place them back to avoid spring deformation. Regularly checking the condition of the rubber blades during car washes can extend their lifespan, as worn-out blades not only fail to clean properly but can also damage the windshield.
To enter maintenance mode for the vertical wipers on the Sylphy, press and hold the wiper control lever in the downward position within 10 seconds after turning off the engine. Wait until the wiper blades rise to the middle of the windshield before manually lifting them. It's best to raise them after parking in high summer temperatures to keep the rubber strips away from the scorching glass and delay aging. Be careful not to let the hood press on the wiper arms during operation. When restoring, test the wiper function first to confirm they have returned to position. My classic Sylphy manual has specific illustrations, and the new models may have operation prompts in the central control screen settings.
