How to Lift the Wiper Blades on the Geely Boyue?

1 Answers
LeJasper
07/29/25 9:36pm
Method to lift the wiper blades on the Geely Boyue: 1. Operate the wiper switch on the center console, first move the wiper switch to the lower right position; 2. After moving it to the lower right, the wipers will automatically stop in this position, allowing them to be lifted. The Boyue is a compact SUV under Geely Auto, with dimensions of 4519mm in length, 1831mm in width, and 1694mm in height, and a wheelbase of 2670mm. In terms of power, the Geely Boyue is equipped with a 1.8TL4 engine, delivering a maximum power of 184 horsepower and a peak torque of 300 Nm, paired with a 7-speed dual-clutch transmission. The vehicle's suspension system combines a front MacPherson strut independent suspension with a rear multi-link independent suspension.
Was this review help?
8
4
Share
More Forum Discussions

What are the causes of abnormal noise in the transmission?

Introduction to the causes of transmission noise: 1. Wear and damage of bearings. When bearings wear out, their clearance increases and their fitting accuracy decreases; when bearings are damaged, abnormal noise will occur due to their inability to operate normally, and may even cause damage to the transmission components, leading to further faults. 2. Abnormal gear meshing clearance. This can be caused by wear of transmission components or the use of parts with low precision during replacement, resulting in excessive clearance; or by overly tight gear clearance during assembly. 3. Metal peeling on gear tooth surfaces, broken gear teeth, or misalignment during assembly. 4. Insufficient lubricant leading to poor lubrication. The corresponding lubricant should be replaced. 5. Water ingress into the transmission. If not repaired in time, it may cause noise problems over time.
11
0
Share

What are the differences between the 2019 Passat and the 2020 Passat?

The differences between the 2019 Passat and the 2020 Passat lie in the fuel tank capacity: the 2019 Passat has a fuel tank capacity of 66 liters, while the 2020 Passat has a fuel tank capacity of 68.5 liters. Both the 2019 Passat and the 2020 Passat are mid-sized 4-door 5-seater sedans, with body dimensions of length 4933mm, width 1836mm, height 1469mm, and a wheelbase of 2871mm. Both models are equipped with a 1.4T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 110 kW and a maximum torque of 250 Nm.
3
2
Share

How Many Days in Advance Can You Renew Your Driver's License?

You can renew your driver's license up to 90 days before its expiration date. The renewal process must be completed at the local vehicle management office. Required documents for renewal include your ID card, driver's license, medical examination certificate, and photos. The vehicle management office is primarily responsible for handling vehicle registration, modification, transfer, mortgage, and deregistration, as well as driver's license applications, replacements, renewals, verifications, and other related services for vehicles and drivers. According to the regulations on the application and use of motor vehicle driver's licenses, drivers must apply for a renewal at the vehicle management office where the license was issued or another office within 90 days before the expiration of their current driver's license.
8
2
Share

What is the correct sequence for parking and turning off an automatic transmission vehicle?

Automatic transmission vehicle parking and shutdown sequence: 1. Depress the brake pedal to ensure the vehicle is completely stopped, then shift into N (Neutral) gear; 2. Engage the parking brake; 3. Shift into P (Park) gear and release the brake pedal; 4. Turn off all unnecessary electrical devices in the vehicle; 5. Verify the gear is in P position, all non-essential electrical devices are turned off, and the steering wheel is straightened; 6. Rotate the key counterclockwise to the end position, or press the engine start/stop button once to switch the ignition to OFF position. Important note: The parking brake must be engaged before shifting into P gear. This practice allows the parking brake to handle the parking load, thereby reducing stress on the transmission system.
13
3
Share

What Causes Fluctuating Car Coolant Temperature?

The reasons for fluctuating car coolant temperature are: 1. Scale buildup on the contact surface between the coolant temperature sensor and the coolant; 2. Aging of the thermistor; 3. Malfunctioning voltage regulator; 4. Short circuit in the temperature gauge heating coil; 5. Needle rubbing against the gauge face. Causes of high coolant temperature include: 1. Poor engine cooling; 2. Prolonged use without cleaning internal and external radiator deposits, affecting coolant circulation and heat dissipation; 3. Damaged fan or other cooling components. Consequences of high temperature are: 1. Accelerated engine wear and reduced oil lubrication effectiveness; 2. Potential radiator rupture due to excessive heat; 3. Increased engine block temperature that may cause cylinder head/block deformation or damage with prolonged exposure.
17
5
Share

What car is represented by two W's?

The logo with two W's stands for Hafei Automobile. Harbin Hafei Automobile Industry Group Co., Ltd., abbreviated as Hafei Automobile, is a subsidiary of China Changan Automobile Group. It is a pioneer and foundational player in the manufacturing and R&D of mini vehicles in China, serving as a key production enterprise and R&D base in the Chinese automotive industry. The company's main products include the Hafei Zhongyi V5, Junyi, Luzun Xiaobawang, Minyi series of micro buses and trucks, the Lobo series of mini cars, the Saibao and Saibao series of economy cars, and new energy vehicles. The Hafei Lobo and Hafei Saibao have won the Integrated Innovation Award at the China Automotive Independent Innovation Achievements Ceremony.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.