How to Lift the Wiper Blades on a Volkswagen?

2 Answers
Carol
07/24/25 1:44am
Turn off the engine, and within 10 seconds, activate the windshield washer switch. The wipers will automatically move to the middle of the windshield. Then, hold the wiper arm firmly and lift it up. When resetting, hold the spine of the wiper blade and gently place it back; avoid snapping it back abruptly. Below is some related information about wipers: 1. The wiper system includes a motor, reducer, four-bar linkage, wiper arm spindle, and wiper blade assembly. Wipers are devices used to remove raindrops and dust from the vehicle's windshield, improving the driver's visibility and enhancing driving safety. Due to legal requirements, almost all vehicles worldwide are equipped with wipers. 2. The power source of the wiper is the motor, which is the core of the wiper system. Proper use and maintenance of the front wipers are crucial for the motor's longevity. When the rain stops, do not turn off the wipers immediately. If the windshield is covered with mud splashes from the vehicle ahead, turning them on again would only spread the mud. Every night when parking, make sure to clean the front windshield thoroughly. Developing this habit can significantly benefit the wiper's performance and lifespan.
Was this review help?
11
4
Share
JoelDella
08/10/25 9:21pm
I often drive Volkswagen cars, and setting the wipers upright is for cleaning the windshield or replacing new wiper blades. The steps are quite simple: first, park the car securely, turn off the engine, make sure the ignition is off, and then immediately operate the wiper control lever by pulling it down once and holding it for a moment. At this point, the wipers will automatically rise to the service position, allowing you to easily wipe the glass. Remember not to operate it while the car is still running to avoid scratching the glass. Doing this regularly can extend the life of the wiper blades, especially during rainy seasons, as clean wiper blades provide better visibility for safer driving. It's recommended to check them monthly to prevent sudden failure from affecting your driving.
Was this review help?
11
1
Share
Expand All
More Forum Discussions

What should be paid attention to when doing the first car maintenance?

Driver's license; maintenance manual; warranty manual; owner's ID card; vehicle's driving license; vehicle's purchase invoice are all the things needed for the first car maintenance. The first maintenance is carried out after driving about 5,000 kilometers, which refers to the first maintenance after the vehicle is driven. The precautions are: make an appointment with the 4S shop in advance. The first maintenance refers to the first maintenance after the new car is driven, and the specific time varies from car to car. The first maintenance is carried out after driving about 5,000 kilometers. The car needs to participate in the first maintenance in time, neither in advance nor delayed. The realization of the first maintenance marks that the running-in period of the car has now ended, and it can be driven according to the standard load and normal speed required by the car. The time of the first car insurance is calculated according to the date of picking up the car. There are two indicator values for the first maintenance time: mileage and time. See which comes first, the first is the standard. The first maintenance items include: changing the engine oil, oil filter, cleaning the air filter, checking whether various oil levels are normal, checking whether the generator belt and wiper blades are damaged, checking whether the tire pressure is normal, checking whether the tires are damaged, bulging, etc. Time required: It takes about 2 hours to complete all the work. The most important thing for the first maintenance of a new car is to change the engine oil and oil filter. When changing the engine oil, the oil filter element must be replaced together. When choosing the engine oil, you must refer to the "Model Use and Maintenance Manual", and different models have different regulations on the engine oil label. Maintenance precautions: Do not rinse the inside of the car body with water: Many people will arrange and clean the car by themselves during the holidays, and rinse with water and scrub with a cloth. Here, it needs to be reminded that the inside of the car body does not need to be rinsed directly with water. If the floor mat is dirty, you can use a vacuum cleaner, or take it out, brush and wash it with detergent, dry it, and then put it back. There are many through holes in the grooves under the rubber mats on the floor of the cab. After the water enters, it will not dry by wind, but will flow to the gearbox and other parts through the through holes for erosion and corrosion. The good practice is to clean with a vacuum cleaner and then scrub with a cloth to prevent water accumulation. Do not mix different brands of antifreeze: When the antifreeze in the car is in short supply, it is recommended that you release the antifreeze as soon as possible and add the same brand of antifreeze from the beginning. Because the brands of antifreeze are different, their chemical functions are also very different. Various functional preservatives will corrode other functional preservatives. Different brands of antifreeze use different preservatives. Do not mix them to avoid unnecessary trouble. Do not lubricate the tire bolts and nuts: When the bolts of the running car are rusty, they are usually oiled so that they can work normally again. In order to prevent the bolts and nuts on the wheels from rusting, some people apply lubricating oil to the bolts and nuts, but it brings necessary risks to safe driving. When the car is running at high speed, the bolts and nuts are simply lifted or even dropped, resulting in driving failure. When the fuel injection car is promoted, there is no need to step on the accelerator: The promoter of the fuel injection car is different from that of ordinary cars. Its fuel injection control device can actively adjust the fuel supply according to the temperature and working conditions of the promoter, so that the promoter can be promoted smoothly.
19
5
Share

What are the causes and solutions for abnormal engine belt noise?

Here are the causes of abnormal engine belt noise: 1. Mostly caused by aging of various belt groups in the engine: or issues with the tensioner leading to overly loose belts, resulting in friction noise, belt slippage, etc. 2. Major belt groups and tensioners inside the engine: such as the engine timing belt, alternator belt, circulating water pump belt, air conditioning belt, power steering pump belt, etc. 3. Caused by the contact surfaces between the belt and pulley becoming too smooth. 4. When the engine speed changes rapidly. Here are methods to solve abnormal engine belt noise: 1. Check if the accessories driven by the belt have bearing damage, seizure, excessive play, or increased accessory power consumption. 2. Replace the belt, or lightly sand the contact surfaces between the pulley and belt with 100-grit sandpaper (light sanding is sufficient).
7
5
Share

Can the Air Conditioning Be Turned On When the Car Is Powered On?

You can turn on the air conditioning when the car is powered on. Here are the details: Compressor Function: The air conditioning can be turned on without starting the engine, but the air blown out by the blower is just natural air. The air conditioning compressor is driven by the engine's power, so when the car is turned off, the compressor naturally stops working. The natural air blown by the blower is powered by the battery, and excessive use of the blower may drain the battery over time. This applies only to traditional fuel-powered vehicles. Interlock Mechanism: Modern cars are equipped with an interlock mechanism that automatically cuts off most auxiliary circuits when the engine is turned off, including the air conditioning and blower. Leaving the air conditioning on after turning off the engine can easily damage it. The next time you start the car, the load from the air conditioning may cause excessive strain on the engine, leading to potential damage.
18
4
Share

How to cancel previous records when re-registering after the driving test has expired?

There is no remedy for an expired driver's license test, and there is no need to cancel the records at the vehicle management office. Here is the relevant information: 1. Regulations on the Application and Use of Motor Vehicle Driver's Licenses: According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," candidates must pass Subject 1 to obtain a learning driving permit before they can proceed with the practice and tests for Subjects 2 and 3. The validity period of the learning driving permit is three years. If Subjects 2 and 3 are not completed within the specified time, the passed subject scores will be invalidated. 2. Automatic Cancellation: In the past, it was indeed necessary to personally visit the vehicle management office to cancel the student records if the driver's license test expired. However, the process has now been simplified. If all subject tests are not completed within three years of obtaining the learning driving permit, the system will automatically cancel the student's record information and clear the learning records.
17
0
Share

Is it necessary to display the compulsory insurance label?

Whether the compulsory insurance label needs to be displayed mainly depends on whether the compulsory insurance policy is electronic: 1. Electronic compulsory insurance policy: For example, in Beijing, Shanghai, Jiangsu Province, Hubei Province, Shanxi Province, Foshan City, Yunnan Province, Shandong Province, etc., it is not required to display the label. 2. Non-electronic compulsory insurance policy: To be on the safe side, it is best to display the label as required. Information about compulsory insurance is as follows: 1. Compulsory insurance: The compulsory traffic accident liability insurance for motor vehicles is a mandatory liability insurance where the insurance company compensates for personal injury, death, and property losses (excluding passengers and the insured) caused by the insured motor vehicle in a road traffic accident within the liability limit. 2. Significance: This insurance is China's first compulsory insurance system implemented by national law, with premiums uniformly stipulated by the state. The main factor affecting the price of compulsory insurance is the 'number of car seats'.
12
5
Share

What is the actual fuel consumption of the 1.4T Tharu?

The fuel consumption of the 1.4T Tharu is 8.04L/100km. Below are the specific details about the Volkswagen Tharu: 1. In terms of power: The Volkswagen Tharu offers two powertrain options, equipped with 1.4T and 2.0T turbocharged engines respectively. The 1.4T engine delivers a maximum power of 110kw and a maximum torque of 250 Nm, while the 2.0T engine produces a maximum power of 137kw and a maximum torque of 320 Nm. 2. Engine: The Volkswagen Tharu uses a turbocharged engine. Compared to a naturally aspirated engine, a turbocharged engine operates under high-pressure forced intake, making the working process more complex. A high-compression-ratio engine does not necessarily require high-octane fuel, as there is no direct relationship between the engine's compression ratio and the fuel octane rating used.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.