How to Lift the Wiper Blades on a Nissan Sylphy?

1 Answers
LeArthur
07/29/25 11:50am
Nissan Sylphy wiper blades can be lifted by following these steps: 1. Park and turn off the engine; 2. Pull the wiper switch downward; 3. Move the wiper blades to the middle of the windshield and manually lift them. Taking the 2021 Nissan Sylphy as an example, it is a compact car with body dimensions of 4631mm in length, 1760mm in width, and 1503mm in height, a wheelbase of 2700mm, a fuel tank capacity of 50 liters, and a curb weight of 1188kg. The 2021 Nissan Sylphy features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 122PS, a maximum power of 90kW, and a maximum torque of 155Nm, paired with a 5-speed manual transmission.
Was this review help?
12
1
Share
More Forum Discussions

What grade of gasoline does the Polo use?

Volkswagen Polo generally recommends using high-quality gasoline with an octane rating of 92 or higher. More information about the Volkswagen Polo is as follows: 1. The Volkswagen Polo uses an all-aluminum engine, which makes the engine lighter in weight, has good thermal conductivity, and is beneficial for increasing the compression ratio. 2. The compression ratio of the Volkswagen Polo reaches 10.5:1. The direct advantage of a high compression ratio is increased cylinder pressure, more thorough atomization of the fuel-air mixture, and improved combustion efficiency. 3. If a high-compression-ratio engine uses low-octane gasoline, it can cause a sharp increase in cylinder temperature, incomplete combustion of gasoline, severe engine vibration, resulting in reduced power output, damage to engine components, increased fuel consumption, and weak driving performance.
19
0
Share

What are the differences between Yaris L and Vios?

The differences between GAC Toyota Yaris L and FAW Toyota Vios are as follows: 1. Different exterior dimensions: FAW Toyota Vios: Length*Width*Height mm 4420*1700*1490; GAC Toyota Yaris L: Length*Width*Height mm 4440*1710*1490. 2. Different engines: FAW Toyota Vios: 81kW engine; GAC Toyota Yaris L: 73kW 1.3L naturally aspirated engine. 3. Different tire specifications: FAW Toyota Vios: Tire specification 185/60-R15; GAC Toyota Yaris L: Tire specification 175/65-R14.
6
4
Share

What does the 'auto' display on the car mean?

The 'auto' button in the car refers to the automatic air conditioning mode. Here is some relevant information about car air conditioning: 1. Function of car air conditioning: Car air conditioning refers to the air conditioning device installed in the car, which can cool, heat, ventilate, and purify the air inside the compartment, providing a comfortable environment for passengers, reducing driver fatigue, and improving driving safety. 2. Principle of car air conditioning: Car air conditioning generally includes refrigeration devices, heating devices, and ventilation devices. This combined system makes full use of the limited space inside the car. Car air conditioning mainly consists of a compressor, electronically controlled clutch, condenser, evaporator, expansion valve, receiver-drier, pipes, condenser fan, vacuum solenoid valve, idle speed controller, and control system.
15
3
Share

What Causes the Brake Noise in Nissan Sylphy?

Nissan Sylphy brake noise may be caused by the following reasons: 1. The use of low-quality or overly hard brake pads. If inferior or excessively hard brake pads are used, they may produce noise when rubbing against the brake disc during braking. 2. Presence of sand or foreign objects between the brake pads and brake disc. Due to the unique design of disc brakes, some sand and foreign objects may inevitably get between the brake pads and disc, causing noise during braking. 3. Severe wear of the brake disc. Using low-quality brake pads or having hard foreign objects between the pads and disc can lead to abnormal wear of the brake disc. 4. Brake pad warning. Some brake pads come with electronic warnings, while some lower-end vehicles use warning tabs. If the brake pads wear down to the warning line, they will produce noise.
12
5
Share

What is the fuel consumption of the Passat 2.0T?

Passat 2.0T has a combined fuel consumption of 6.3-6.7L/100km. There are currently 8 models of Passat 2.0T available for sale: 330TSI Elite Edition, Starlight Elite Edition, Luxury Edition, Starlight Luxury Edition, Starlight Premium Edition, and Premium Edition, all with a combined fuel consumption of 6.3L/100km. The 380TSI Luxury Edition and Flagship Edition have a combined fuel consumption of 6.7L/100km. The above figures are NEDC combined fuel consumption values, which represent the fuel consumption data measured under the NEDC test procedure. Actual fuel consumption is higher than these values, ranging from 8.0-9.1L/100km.
9
1
Share

How often should the Tiida fuel filter be replaced?

Tiida fuel filter should be replaced every 30,000 kilometers. More information about the fuel filter is as follows: 1. The main function of the fuel filter is to filter out impurities in gasoline, and it can be divided into carburetor type and electronic injection type. 2. The fuel filter can filter out solid impurities such as iron oxide and dust or water contained in gasoline, which not only reduces the chance of the fuel injector being blocked by impurities but also ensures the quality of gasoline flowing into the fuel system, thereby optimizing engine performance and providing protection for the engine. Additional information: The Tiida is a hatchback under Dongfeng Nissan, with body dimensions of 4393mm in length, 1766mm in width, and 1524mm in height, and a wheelbase of 2700mm.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.