How to Lift the Wiper Blades on a Magotan?

1 Answers
VonGeorge
07/30/25 4:57am
Here are the steps to lift the wiper blades on a Magotan: 1. After turning off the vehicle or cutting the power, within 10 seconds, pull the wiper switch toward the steering wheel. 2. The wiper blades will automatically move to the middle of the windshield, then manually lift them up. 3. Finally, turn on the power and operate the wiper switch to reset them. Below are the steps to replace the wiper blades: 1. After entering the car, turn on the ignition switch (do not start the vehicle). Within 3 seconds of turning off the ignition switch, push the wiper switch downward once. The wiper will then move, and the wiper arm will rise until it stops, allowing you to replace the wiper blades. 2. After completing the maintenance, turn on the ignition switch again (this time, do not turn it off). Manually push the wiper switch once, and the wiper will return to its initial position.
Was this review help?
9
4
Share
More Forum Discussions

How long is the validity period of a driving test permit?

The validity period of a driving test permit is three years. Applicants must complete both the subject two and subject three tests within this period. If the tests are not completed within the validity period, the passed subject results will be invalidated. Relevant regulations and precautions are as follows: Relevant Regulations: Individuals applying to learn driving on designated grounds and roads must obtain a learning driving permit as required. The validity period of the learning driving permit is three years, and applicants must complete both the subject two and subject three tests within this period. If the tests are not completed within the validity period, the passed subject results will be invalidated. The starting date is the date when the subject one test is passed. Precautions: No more than five attempts for failed tests: Within the validity period of the driving test permit, the number of scheduled attempts for the subject two and subject three road driving skill tests must not exceed five each (meaning a total of ten test opportunities). If the fifth scheduled test is still not passed, the results of other previously passed subjects will be invalidated, and the student must start over from subject one.
18
3
Share

Is a Tire Pressure of 160 kPa Caused by a Puncture?

A tire pressure of 160 kPa is not necessarily caused by a puncture. Apart from a puncture, there could be other reasons, such as issues with the tire valve core, leading to slow air leakage. Hazards of Low Tire Pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption; Heavier steering wheel and tendencies to drift, which are factors detrimental to driving safety; Increased movement of various parts of the tire, causing abnormal heat due to excessive rolling; Reduced functionality of the cords and rubber, leading to delamination or cord breakage, excessive friction with the rim, causing damage to the bead area and abnormal wear; Exponentially increased friction between the tire and the ground, rapid rise in tire temperature, softening of the tire, and a sharp decline in strength. High-speed driving may result in a blowout; Increased deformation of the tire body, prone to cracks on the sidewalls, along with flexing movements, leading to excessive heat, accelerating rubber aging, fatigue of the cord layers, cord breakage, and increased tire contact area, accelerating shoulder wear. Methods to Address Insufficient Tire Pressure: If no visible damage is found, simply inflate the tire to normal pressure and reset the tire pressure system; If a puncture is discovered upon inspection, promptly drive to a tire shop for repair and reinflation; If the tire pressure warning reappears after inflation without any holes in the tire, it may be due to air leakage caused by a deformed rim. It is recommended to inspect and replace the rim.
9
4
Share

What engine is used in the Trumpchi GS5?

Trumpchi GS5 uses a 1.5-liter turbocharged engine with the specific model number 4A15J1, which complies with the China VI vehicle emission standards. In terms of power: The maximum horsepower of this engine in the Trumpchi GS5 is 169 hp, with a maximum power of 124 kW and a maximum torque of 265 Nm. The Trumpchi GS5 is a mid-size SUV produced by GAC Motor. In terms of body dimensions, the Trumpchi GS5 measures 4695 mm in length, 1885 mm in width, and 1700 mm in height. In terms of transmission, the Trumpchi GS5 is equipped with a 6-speed automatic transmission across all variants.
9
1
Share

How to use the S gear in Q5?

The operation method of the S gear in Q5 is: press the S gear button, push the gear lever forward to upshift, and pull it backward to downshift. Q5 is a medium-sized 5-door 5-seat SUV with a body length of 4629mm, width of 1898mm, height of 1655mm, and a wheelbase of 2807mm. It is equipped with a 2.0T turbocharged engine, paired with an 8-speed automatic manual transmission. The Q5 features front-engine four-wheel drive, with a five-link independent suspension at the front and a trapezoidal link-type independent suspension at the rear. The body structure is of a load-bearing type, and the trunk volume is 540 liters.
2
5
Share

What are the new traffic restriction regulations in Guangzhou in 2020?

2020 Guangzhou traffic restriction regulations implement a 'drive four days, stop four days' management measure, divided into driving calculation cycles and non-driving calculation cycles. In the controlled area, the driving calculation cycle starts from the driving day, allowing continuous driving for a maximum of 4 days within any 4-day period. The specific restricted boundaries include: Daguan Road, East Ring City Expressway, Pearl River Waterway, Yagang Avenue, South China Expressway Phase III, South China Expressway Phase III Auxiliary Road, Jianpeng Road, Tongtai Road, Guangzhou Avenue North, South China Expressway Phase II, Guangshan Road, as well as the following bridges and tunnels entering the above areas: Luoxi Bridge, Hedong Bridge, Zhoutouzui Tunnel, Pearl River Tunnel, Pearl River East Bridge, and Jinshazhou Bridge.
2
2
Share

Which country produces the BMW 730?

The BMW 730 is produced in Munich, Germany, and is an imported model of BMW. The dimensions of the BMW 730 are 5223mm in length, 1902mm in width, and 1498mm in height, with a wheelbase of 3210mm. In terms of power, the BMW 730 is equipped with a 2.0-liter turbocharged engine, delivering a maximum horsepower of 265, a maximum power of 195 kW, and a maximum torque of 400 Nm. For safety features, the BMW 730 comes standard with front and rear side airbags, tire pressure monitoring, brake force distribution system, brake assist system, lane departure warning system, and active braking system, among others.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.