How to Lift the Wiper Blades on a BMW X1?

1 Answers
AaronMarie
07/30/25 7:45am
The steps to lift the wiper blades on a BMW X1 are: 1. Ensure the car is turned off; 2. Press the start button to power on the vehicle without pressing the brake or starting the engine; 3. Wait for 5 seconds, then turn off the power; 4. Push the wiper control lever upward and hold it at the top for more than 3 seconds. At this point, the wipers will stand up, and you can then lift them away. As a mid-cycle refresh model, the BMW X1 maintains the same proportions as the current model, with the addition of some family-style elements in certain details. The iconic double-kidney grille is larger in size, paired with a sporty front bumper design, delivering a strong visual impact.
Was this review help?
19
2
Share
More Forum Discussions

What should be paid attention to when driving a motor vehicle on icy and snowy roads?

Precautions for driving a motor vehicle on icy and snowy roads: 1. Slow down and drive cautiously, especially on snow-covered and icy roads. Pass through icy surfaces steadily at a reduced speed; 2. Avoid sudden braking, as it can easily cause skidding or rear-end collisions; 3. The temperature difference between the inside and outside of the vehicle is significant in snowy conditions, leading to fogging on the windows. Ensure clear visibility inside the vehicle; 4. When turning, yield to pedestrians and other vehicles to prevent accidents, especially on icy and snowy roads where slippery conditions make it difficult to stop; 5. Windshield wipers can easily freeze in snowy weather. Do not use them until they are thawed to avoid damaging the motor; 6. Many roads may be icy. Vehicles with very low ground clearance should avoid passing through to prevent getting stuck or damaging the undercarriage.
9
0
Share

Does exposing a car to direct sunlight in summer have any impact on the vehicle?

Exposing a car to direct sunlight in summer does have an impact on the vehicle. The effects include: 1. It can trigger the release of pollutants from various sources, which may become carcinogenic over time; 2. UV rays can accelerate the aging of plastic parts, rubber components, and paint. Methods to prevent car exposure to sunlight: 1. Park the car in a shaded area; 2. Allow the interior to ventilate with the outdoors; 3. Use a sunshade to cover the front of the car. Summer tire maintenance tips: 1. Regularly remove stones or debris from the tread grooves to prevent deformation of the tire crown; 2. Prevent tire blowouts; 3. Check if the tire pressure is within the standard range, neither too high nor too low; 4. If frequently driving on highways, ensure regular tire rotation.
12
1
Share

What Does Japanese Car Mean?

Japanese cars refer to vehicles produced in Japan or manufactured by Japanese brands in other regions. Major brands include: Toyota, Nissan, Honda, Subaru, Mazda, Mitsubishi, Isuzu, Suzuki, etc. Taking the Toyota Camry as an example, its body dimensions are 4885mm in length, 1840mm in width, and 1455mm in height, with a wheelbase of 2825mm, and it features a front-engine, front-wheel-drive layout. The Toyota Camry is equipped with a 2.0L naturally aspirated engine paired with a CVT continuously variable transmission. This engine delivers a maximum power of 131kW and a peak torque of 210Nm. Additionally, the engine incorporates hybrid injection technology and utilizes an aluminum alloy cylinder head and block.
8
1
Share

How to Stop at Traffic Lights While Driving a Manual Transmission Car?

Manual transmission car stopping method at traffic lights: First release the throttle and let the vehicle's weight drag to decelerate, then immediately downshift according to the speed, press the clutch, then brake, shift to neutral, and pull up the handbrake. When the light turns green, press the clutch fully with your left foot, step on the brake with your right foot, shift into first gear, gently apply throttle with your right foot, lift the clutch to the semi-engaged position with your left foot, give a little more throttle with your right foot, then slowly release the clutch with your left foot to start moving. Manual transmission gear indicators show 1, 2, 3, 4, 5, R, while automatic transmission gear indicators show P, R, N, D, S, L, M. Manual transmission cars require manual gear shifting for starting, accelerating or decelerating, while automatic transmission cars only need deeper throttle for higher speed and lighter throttle for lower speed, without manual shifting or frequent clutch operation with the left foot.
12
5
Share

How to reset the tire pressure warning light on Volkswagen Bora?

Method to reset the tire pressure warning light on Volkswagen Bora: First, locate the SET button marked either in front of the gear lever or on its right side. Turn on the vehicle's ignition, then press the SET button and hold it for three seconds. The tire pressure indicator light on the dashboard will automatically turn off. The Bora's tire pressure monitoring system activates automatically, functioning to continuously monitor the tire pressure in real-time while driving. It alerts the driver in case of tire leaks or low pressure to ensure driving safety. The Volkswagen Bora has a body length of 4663mm, width of 1815mm, height of 1462mm, and a wheelbase of 2688mm. It is equipped with a 1.2T turbocharged engine paired with a 7-speed dual-clutch transmission. This engine delivers a maximum power of 85kW and a maximum torque of 200Nm.
9
2
Share

Is It Advisable to Buy a Car with a Replaced Radiator Support Frame?

It is acceptable to purchase a car with a replaced radiator support frame. If only the radiator support frame or some energy-absorbing collision components are damaged and subsequently replaced, and the overall condition of the vehicle remains good without any damage to structural components like the frame rails, there should be no safety hazards or impact on driving performance. Such a vehicle falls within an acceptable range, making it a viable purchase. Methods to check if the radiator support frame has been replaced include: 1. Inspect for any deformation, rust, or signs of disassembly; 2. Check for the presence of original manufacturer markings; 3. Examine whether the mounting holes or locating holes are deformed; 4. Look for any signs of breakage, cutting, or re-welding.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.