How to Lift the Wiper Blades on a BMW X1?

2 Answers
ClaireRose
07/24/25 5:00am
Turn on the ignition switch of the BMW X1, only powering it without starting the engine, and wait for 5 seconds before turning off the ignition again. Pull the wiper lever upward past the pressure point and hold it for about 3 seconds until the wiper blades come to rest in an almost vertical position. Precautions for using wiper blades are as follows: 1. Maintain cleanliness. If streaks appear on the windshield, the wiper blades may be dirty. Use a towel dampened with alcohol to wipe the dirty parts of the wiper blades. Cleaning them once a month can improve the performance of the wipers. 2. Check the rubber. If there is a harsh noise from the windshield, the rubber of the wiper blades may have hardened, worn out, or cracked. If the wear is not particularly severe, the owner can use sandpaper to smooth out the uneven surfaces. 3. Avoid direct sunlight. Park the car in a shaded area, such as a garage, where it is not exposed to the sun. Summer is particularly harsh on cars, but some owners leave their vehicles exposed to direct sunlight, which only accelerates the aging of the wiper blades.
Was this review help?
15
1
Share
McAdriana
08/11/25 12:39am
Last time when I cleaned the wiper blades of my BMW X1 by myself, I figured out a simple method. You need to park the car, turn off the engine, and pull out the key to ensure the car is completely powered off. Then, within a few seconds, quickly press the wiper control stalk on the right side of the steering wheel upwards (the momentary position) and release it immediately. At this point, the wipers will automatically stop in the middle of the windshield, allowing you to easily lift them up. BMW designed this feature to protect the wiper arms from being exposed when parked, preventing them from getting scratched or hit by foreign objects. Once lifted, washing the car or replacing the blades becomes very convenient. After completing the task, restart the car and press the wiper switch to let it operate once, and everything will return to normal. If you accidentally force the wipers, you might damage the motor or wiring, so it's safest to follow the steps patiently. Additionally, BMW's intelligent system ensures worry-free daily use, but such small tasks during car washing can always be handled by yourself.
Was this review help?
16
1
Share
Expand All
More Forum Discussions

How to Turn Off Auto Start-Stop on a 2019 Sagitar?

19 Sagitar Auto Start-Stop deactivation method is as follows: 1. Locate the switch: First, find the Auto Start-Stop switch position. On the 2019 Sagitar, the switch is located in front of the gear lever, featuring a button with a circle containing a capital A and OFF below it. 2. Deactivation method: The Auto Start-Stop system is automatically enabled when the ignition is turned on. To deactivate it, simply press the button (note: the light indicates deactivation when illuminated). Below is how the Start-Stop system works: When the vehicle stops due to traffic congestion or at an intersection, the driver presses the brake pedal and shifts to neutral. The engine idles without being in gear; the anti-lock system's wheel speed sensors show zero; the electronic battery sensor indicates sufficient energy for the next start. When these three conditions are met, the engine automatically shuts off. When the traffic light turns green, releasing the brake or turning the steering wheel will immediately restart the engine, allowing the driver to accelerate, all while remaining in D gear.
15
4
Share

What are the differences between the three series of Monroe shock absorbers?

The three series of Monroe shock absorbers are GAS-Magnum, Sensa-Trac, and Reflex. The differences between these three series are as follows: Different exterior colors: GAS-Magnum is often referred to as the 'yellow shock' due to its yellow exterior color; Sensa-Trac has a black exterior; Reflex is Monroe's more premium product with a gray exterior. Different classifications: GAS-Magnum is a gas-charged single-direction shock absorber; Sensa-Trac is commonly known as a road-feel shock absorber and is a double-tube hydraulic shock absorber; Reflex is a hybrid gas-oil double-direction shock absorber. Different comfort levels: GAS-Magnum offers decent comfort but is not suitable for aggressive driving. It is less prone to oil leakage if the length is properly matched. Due to its affordable price, many repair shops recommend this product. Sensa-Trac is stiffer with a shorter stroke, making it more suitable for high-speed highway driving, providing better control of body posture during quick lane changes. However, it offers poor comfort on bumpy roads and is not suitable for lifted vehicles. Reflex can adjust comfort levels based on road conditions.
1
3
Share

How Long Can a Car Be Parked on a Slope?

It is not recommended to park a car on a slope for more than 24 hours. While occasional parking on a slope is acceptable, doing so frequently can cause significant damage to the vehicle and even pose safety hazards. Parking on a slope for extended periods can negatively impact the car's braking system and suspension, potentially leading to severe damage or even failure. When parking on a slope, the handbrake is the first component to suffer damage. Prolonged use can cause fatigue in the handbrake cable, reducing its effectiveness. Additionally, parking on a slope affects the suspension. The side of the suspension facing downhill bears greater pressure, which over time can lead to uneven aging and stiffness between the front and rear suspension, compromising ride comfort. When parking on a slope, it is advisable to position the car facing uphill. This helps protect the front suspension, front wheel brakes, and front tires, as well as prevent water from entering the exhaust pipe. The car's braking system, also known as the automotive brake system, allows the driver to decelerate or stop the vehicle as needed. It ensures that a stationary car remains stable in various road conditions and helps maintain a steady speed when driving downhill. The braking system only functions when the engine is running. Most vehicles today use a front disc and rear drum braking system, while some models feature a four-wheel disc braking system.
17
0
Share

What is the actual fuel consumption of the Mazda CX-5?

The Mazda CX-5 2.0I model has a fuel consumption of 8.0 liters per 100 kilometers, while the 2.5I model consumes 10.5 liters per 100 kilometers. Here are some details about the Mazda CX-5: 1. Body dimensions: The car measures 4555 mm in length, 1842 mm in width, 1685 mm in height, and has a wheelbase of 2700 mm. 2. Powertrain: (1) 2.0L naturally aspirated engine: It delivers 155 horsepower and a maximum torque of 200 Nm, with the maximum power achieved at 6000 rpm and the maximum torque at 4000 rpm. (2) 2.5L naturally aspirated engine: It produces 196 horsepower and a maximum torque of 252 Nm, with the maximum power achieved at 6100 rpm and the maximum torque at 4000 rpm. 3. Suspension: The Mazda CX-5 uses a MacPherson strut front suspension and a multi-link independent rear suspension. 4. Models: The Mazda CX-5 is available in both front-wheel drive and all-wheel drive versions, with the all-wheel drive models equipped with an on-demand four-wheel drive system.
14
5
Share

What is the top speed of the Ford Mustang?

Ford Mustang has a top speed of 233 kilometers per hour. Here are the relevant details: 1. Introduction: The Ford Mustang is a sports car launched by Ford Motor Company. The Mustang's original car platform belonged to the second-generation North American Ford Falcon. 2. Exterior: The iconic extended hood and shorter rear deck mark 40 years of history, just as these classic design styles have become the Mustang's signature since the 1960s: the C-shaped side scoops, the triple-element taillights, and the galloping horse emblem in the middle of the grille. 3. Interior: The cockpit benefits from Ford's investment in car interiors, and like the exterior styling, it is stunning everywhere. The extraordinary design concept revisits the Mustang's history with modern manufacturing materials and facilities, including the industry's first color-configurable instrument panel, pushing personalization to the extreme. The stylish and functional interior design and its precise craftsmanship set a new standard for sports car design.
16
5
Share

Where is the air conditioning filter of the new 308 located?

The air conditioning filter of the new Peugeot 308 is not located in the glove compartment on the passenger side. Instead, it is situated where the passenger's left leg would be. There is a small cover in this area. After removing the small cover and opening the plastic interior panel, you can see the air conditioning filter box. Opening this box allows you to replace the air conditioning filter. Here is some related information about the air conditioning filter: 1. Scope of application: An air filter is a type of filter. It is mainly used for air filtration in engineering vehicles, automobiles, agricultural vehicles, laboratories, sterile operating rooms, and various precision operating rooms. 2. Effects of unfiltered air: When the engine is operating, it needs to intake a large amount of air. If the air is not filtered, the dust suspended in the air will be drawn into the cylinders, accelerating the wear of the piston assembly and the cylinders. Larger particles entering between the piston and cylinder can cause severe "cylinder scoring," which is particularly serious in dry and sandy working environments. 3. Function: The air filter is installed in front of the carburetor or intake pipe to filter out dust and sand particles from the air, ensuring that sufficient and clean air enters the cylinders.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.