How to Lift the Windshield Wipers on a Car?

[BethanyFitz]

To lift the windshield wipers on a car, follow these steps: 1. Turn off the car engine, then within 10 seconds activate the windshield washer fluid switch by pulling the wiper stalk toward the driver's side (some models use a physical button instead); 2. After pressing the washer fluid switch, the wipers will automatically move to the middle position on the windshield - simply lift them vertically by hand; 3. To reset them, reverse these steps. Windshield wipers are blade structures installed in front of the windshield, composed of components like the motor, reducer, four-bar linkage mechanism, wiper arm spindle, and wiper blade assembly. Their primary function is to clear rain, snow, and dust that obstruct visibility from the windshield.

[VanJune]

As an ordinary car owner, I'd like to share my personal experience: Lifting the wiper blades is mainly to prevent snow and ice from sticking to the windshield in winter. The steps are quite simple: First, make sure the engine is turned off and the wiper system stops operating; then gently lift the wiper arm from the windshield with your hand and position it vertically at a right angle. Move slowly to avoid damaging the washer nozzle or sensors with excessive force. Different car models vary – some older cars allow direct lifting, like mine; modern cars may have a service mode, activated by quickly flicking the wiper switch after turning off the engine to stop it in the middle position before lifting. I recommend doing this during every car wash or seasonal change, while also checking the wiper blades for wear. This practice can extend their lifespan and make windshield cleaning easier. Overall, don't overcomplicate it – beginners can simply refer to the owner's manual for guidance, with operational safety being the top priority.

[VanAyla]

I often DIY car repairs, and lifting the wiper blades is a routine task. The key lies in safe operation: first, turn off the engine and the wiper system to avoid accidental activation and injury; second, manually lift the wiper arm vertically, being careful not to press against the glass edge or the washer nozzle. If there's a service function, it's even better—briefly activate the switch after turning off the engine to position the wipers conveniently. From my experience with multiple car models, this action not only prevents freezing but also makes it easier to replace the blades or clean debris at the base of the wiper arm. Additional tip: regularly check if the wiper rubber is aging to prevent leaks; handle gently to avoid damaging the car. In short, it's a practical skill that saves on repair costs.

[DeMatthew]

Lifting the wiper blades is easy: After parking and turning off the engine, switch off the wipers, then gently lift them vertically from the windshield by hand, being careful not to damage anything. This prevents the rubber blades from sticking to the glass in snowy or icy conditions. I use this method for daily maintenance to save time on upkeep. It's recommended to do this quickly, and remember that procedures may vary slightly between car models—always prioritize safety during operation.