How to License a Motorcycle Without a Residence Permit?

1 Answers
MacDawson
07/29/25 11:06pm
Without a residence permit, you cannot license a vehicle. You need to obtain a residence permit first before you can proceed with the vehicle licensing process according to the required procedures. If you want to license a motorcycle outside your household registration location, you must first obtain a residence permit to complete the licensing. There are two ways to obtain a residence permit: 1. Proxy service: Have the motorcycle dealer handle it for you, and you can get it in a few days, but this residence permit can only be used for licensing. 2. Self-application: First, obtain a residency certificate from your residential property management center, then take your property ownership certificate or purchase contract along with a one-inch photo to the local police station to apply. This method is free of charge, but it takes about 25 days to process.
Was this review help?
4
2
Share
More Forum Discussions

Should the Cayenne use 95 or 98 octane fuel?

The engine in the Cayenne model specifies a minimum fuel octane rating of 95, so this vehicle can use gasoline with an octane rating of 95 or higher. Precautions for refueling: It is important to note that gasoline should not be mixed. The higher the octane rating of the fuel used in the car, the more completely the gasoline will burn, resulting in better performance in terms of power. Do not use low-octane gasoline for this vehicle: Because this car is equipped with a turbocharged engine, the engine's compression ratio is too high. During operation, it requires higher-octane gasoline to provide power. If low-octane gasoline is used, the engine will experience knocking, and the car's power will be reduced.
15
4
Share

Is the Jeep Cherokee a four-wheel drive?

Jeep Cherokee has both four-wheel drive and two-wheel drive versions. Structure of the four-wheel drive version: The Cherokee's Active-Drive intelligent four-wheel drive system is based on AAM's EcoTrac four-wheel drive system, which mainly consists of two parts: PTU (Power Take-Off) and RDM (Rear Drive Module). The PTU is connected to the transmission and can transfer or disconnect power to the RDM within 0.2 seconds to save fuel. The RDM achieves dynamic torque distribution between the front and rear wheels through TTD (Torque Transfer Device). Features of the four-wheel drive version: The main difference between the Cherokee's Active-Drive-I four-wheel drive system and the Active-Drive-II is the lack of a low-range gear (low-speed four-wheel drive) function. According to the data, another feature of this four-wheel drive system is the ability to completely disconnect the central driveshaft to save fuel.
11
1
Share

What is the meaning of BMW?

BMW stands for Bayerische Motoren Werke AG, which means Bavarian Motor Works. BMW is produced by the Bavarian Motor Works, representing the pure pedigree from the state of Bavaria. The style of the logo: The logo features the three letters BMW inside a circular ring, with the central circle divided into four equal parts in blue and white, resembling the blue sky, white clouds, and a continuously rotating propeller. BMW's predecessor was an aircraft engine manufacturing company, and to this day, BMW still produces car engines. The meaning of the logo: It signifies the excellent quality and leading technology of BMW cars, as well as the long history of BMW as a company. It reflects BMW's ability to meet customers' greatest desires with the latest technology and most advanced concepts across vast time and space, while also showcasing the company's dynamic spirit and ever-evolving appearance.
17
5
Share

What is the SAIC Lavida?

SAIC Lavida is the Shanghai Volkswagen Lavida, Volkswagen's first independently developed and designed A-segment car. Lavida's Exterior: The front face design of the Lavida differs significantly from Volkswagen's previous A-segment models, particularly its unique teardrop-shaped headlights. The headlight cluster design of the Lavida gives a sense of déjà vu, as its design concept originates from Shanghai Volkswagen's 'Nezha' concept car. Additionally, the Lavida's bumper design is also distinctive, with its robust and harmonious curves serving as the highlight of the Lavida's front face. Lavida's Powertrain: In terms of the engine, the Shanghai Volkswagen Lavida is equipped with a 1.6-liter engine derived from the Polo and a 2.0-liter naturally aspirated engine from Volkswagen's new engine platform. Its performance is significantly more advanced than the older 2.0-liter engine found in the Passat.
3
0
Share

What Causes the Car Water Warning Light to Illuminate?

The illumination of the car water warning light indicates that the engine's water temperature is too high. Detailed reasons for the car water warning light turning on are as follows: 1. Coolant issues: The normal operating temperature of an engine is around 90 degrees Celsius. If the temperature is too high, it may be due to insufficient coolant in the antifreeze reservoir or excessive water mixed into the antifreeze. The purpose of antifreeze is to help cool the entire radiator system. When there is a deficiency or too much water, the engine may "overheat." 2. Radiator problems: This includes three aspects: (1) Leakage in the radiator body, corrosion inside the radiator, or damage from impact. Check for any signs of leakage around the engine. (2) Dirt such as mud, lint, or gravel on the radiator surface, or scale from tap water, causing localized temperature increases in the radiator. (3) Leakage in the hoses connected to the radiator, leading to insufficient cooling water and elevated water temperature. 3. Water pump issues: The circulation of cooling water is driven by the water pump, which pressurizes the cooled water from the radiator into the engine water jacket, forcing the heated coolant back to the radiator for cooling. If the water pump fails to operate properly, it cannot generate sufficient pressure to circulate the coolant to the radiator, resulting in poor coolant circulation and excessive water temperature. If the water pump is faulty, it needs to be replaced with a new one.
15
2
Share

What is the method to reset the oil maintenance light on a Jaguar XF?

Jaguar XF oil maintenance light reset method: 1. First press the Jaguar XF's one-touch start button; 2. Use the multifunction buttons on the right side of the steering wheel to navigate to the vehicle information in the instrument panel; 3. Locate the "Recent Alerts" option and press OK to enter; 4. Simultaneously hold down the down button on the right side of the steering wheel and the "i" button on the end of the turn signal stalk, maintaining this action for more than 5 seconds; 5. Restart the vehicle. If the light has not reset, repeat the process. The Jaguar XF is a mid-to-large luxury sedan from Jaguar, with body dimensions of 4961mm in length, 1877mm in width, and 1460mm in height, and a wheelbase of 2909mm. The Jaguar XF features a front-engine, rear-wheel-drive layout, with a front suspension type of double-wishbone independent suspension and a rear suspension type of multi-link independent suspension.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.