How to leave a gap in the Jetour X70 window?

How to Remove the Cigarette Lighter?

The cigarette lighter consists of two parts: an outer ring and an inner ring. To use it, press the inner ring down until it reaches the required temperature, at which point it will automatically pop back to its original position. You can then pull it out by gripping the outer ring. Alternatively, you can remove the cigarette lighter by pressing the inner ring down and pulling it out directly. Here is some information about cigarette lighters: 1. Generally, cigarette lighters are mainly used in places where open flames are prohibited, such as factories and workshops, where smoking requires the use of a cigarette lighter. Additionally, besides lighting cigarettes, car cigarette lighters can also be equipped with a car inverter, which converts the car's 12V, 24V, or 48V DC power into 220V/50Hz AC power for use with ordinary electrical appliances. 2. It is best to use a split-type car inverter, with the appliance power limited to below 150W, ensuring the output current does not exceed the battery current. The cigarette lighter socket is an electronic device similar to a multi-hole household power socket, which connects to the car's power supply via a plug and provides multiple cigarette lighter ports.

5

Share

What is the difference between 1.8L and 1.8T?

1.8T and 1.8L both refer to an engine displacement of 1.8 liters, where the 'T' indicates that the engine is turbocharged. Therefore, 1.8T means a 1.8-liter turbocharged engine, while 1.8L simply denotes a 1.8-liter naturally aspirated engine without turbocharging. Here is some information about turbocharging: 1. The primary function of a turbocharger is to increase the engine's air intake, thereby enhancing its power and torque output, making the car more powerful. 2. When a turbocharger is installed on an engine, its maximum power output can increase by 40% or more compared to the same engine without a turbocharger. This means that the same engine can generate greater power after being turbocharged. 3. Taking the most common 1.8T turbocharged engine as an example, after turbocharging, its power output can reach the level of a 2.4L engine, but its fuel consumption is not significantly higher than that of a 1.8L engine. In another sense, this improves fuel economy and reduces exhaust emissions.

10

2

Share

What is the main function of a clutch?

The main function of an automotive clutch is to gradually engage the connection between the engine and the transmission, ensuring smooth vehicle startup. It temporarily disconnects the link between the engine and the transmission to facilitate gear shifting and reduce impact during gear changes. During emergency braking, the clutch can separate to prevent overload in the transmission system, providing a certain protective effect. Here is information about clutches: 1. Driving section. The driving section consists of components such as the flywheel, clutch cover, and pressure plate. This part is connected to the engine crankshaft. The clutch cover is bolted to the flywheel, and torque is transmitted between the pressure plate and the clutch cover via 3-4 drive straps. 2. Driven section. The driven section is composed of single, dual, or multiple friction discs, transmitting the power from the driving section to the transmission input shaft through friction. The driven disc consists of three basic parts: the driven disc body, friction linings, and the driven disc hub. 3. Pressure mechanism. The pressure mechanism mainly consists of coil springs or diaphragm springs, rotating together with the driving section. Supported by the clutch cover, it presses the pressure plate against the flywheel, thereby clamping the driven disc between the flywheel and the pressure plate. Coil springs are divided into two types: circumferentially arranged and centrally arranged. A clutch with a cylindrical or conical spring arranged at the center is called a central spring clutch. 4. Operating mechanism. The clutch operating mechanism starts from the clutch pedal in the driver's compartment and ends at the release bearing inside the clutch. Its function is to convert the human force on the pedal into thrust that pushes the release sleeve. It can be categorized into mechanical, hydraulic, assisted, and servo types.

17

3

Share

How to Use a Wheel Alignment Machine?

First, park the vehicle on a level surface, check if the tire pressure on both sides is the same, and adjust if necessary. Then, install the sensors, turn the steering wheel left and right as instructed by the computer, and check the data for the front and rear axles. After that, install the brake lock and secure the steering wheel. Next, lift the vehicle and make necessary adjustments to the toe-in, caster, and camber of the front axle based on the computer's data, followed by checking and adjusting the toe-in of the rear axle. After tightening the bolts, perform a test drive. Here are the functions of a wheel alignment machine: 1. Increase driving safety. 2. Reduce tire wear. 3. Keep the steering wheel straight when driving straight, maintaining straight-line driving. 4. The steering wheel automatically returns to center after turning. 5. Enhance the sense of driving control. 6. Reduce fuel consumption. 7. Decrease wear and tear on suspension components.

1

0

Share

What is ETC on the highway?

Highway ETC (Electronic Toll Collection) translates to electronic toll collection, which is a non-stop toll collection system. Highways are equipped with one or more ETC lanes. ETC toll collection method: Through microwave-based dedicated short-range communication between the vehicle's RFID tag installed on the windshield and the microwave antenna in the ETC lane at the toll station, the system uses internet technology to conduct background settlement processing with the bank. This allows vehicles to pass through bridge and road toll stations without stopping to pay tolls. Banks install this type of ETC express card with a post-payment system. ETC application conditions are as follows: Provide the original and photocopy of the vehicle owner's valid ID card and vehicle registration certificate. For the photocopy of the driver's license, the page with the most recent annual inspection stamp must be copied. Submit a bank debit card application form, which will be used to bind the ETC card. After receiving the card, you can go to a designated bank branch to collect and install the ETC onboard device for free, with no charges during the process. Applicants must be between 18 and 60 years old and own a vehicle registered under their name.

4

Share

Which is better between SL and SN engine oil?

Engine oil grades are classified into SA, SB, SC, SD, SE, SF, SG, SH, SJ, SL, SM, and SN levels. The later the letter in the alphabet, the higher the grade, with SN being the highest grade of engine oil currently available. Therefore, SN-grade engine oil is superior to SL-grade engine oil, and the higher the grade, the better. Here is some information about engine oil: 1. API (American Petroleum Institute) is the abbreviation for the American Petroleum Institute. The API grade represents the quality grade of engine oil. It uses a simple code to describe the working capability of engine oil. 2. Engine oil grades are classified into SA, SB, SC, SD, SE, SF, SG, SH, SJ, SL, SM, and SN levels. The later the letter in the alphabet, the higher the grade, with SN being the highest grade of engine oil currently available. 3. SJ is the standard from the 1990s, SL is the standard from 2001, SM is the standard from 2004, and SN is the standard from 2010.

12

1

Share

How to leave a gap in the Jetour X70 window?

How to Remove the Cigarette Lighter?

What is the difference between 1.8L and 1.8T?

What is the main function of a clutch?

How to Use a Wheel Alignment Machine?

What is ETC on the highway?

Which is better between SL and SN engine oil?

The Difference Between Hybrid and Plug-in Hybrid Vehicles

Does the Oxygen Sensor Need Regular Cleaning?

What are the consequences of engine oil burning?

What Causes Engine Noise When Accelerating?