How to Know When to Replace Brake Fluid?

1 Answers
LaJohn
07/29/25 10:17pm
Methods to determine if brake fluid needs replacement are: 1. Open the brake fluid reservoir cap; if the fluid appears turbid or black, it needs replacement; 2. After driving at a normal speed above 40km/h, apply sudden braking; if the braking distance significantly increases, replacement is required; 3. If braking feels soft or unstable during normal driving, replacement is needed. Brake fluid should be replaced every two years or approximately every 30,000 kilometers. The functions of brake fluid are: 1. It has a very low freezing point, ensuring good fluidity at low temperatures; 2. It has an extremely high boiling point, preventing vapor lock at high temperatures; 3. It does not cause corrosion to metal or rubber.
Was this review help?
8
3
Share
More Forum Discussions

Will I Get Points Deducted for Stopping in a Right-Turn Lane for 30 Seconds?

Stopping for 30 seconds at a right-turn lane at an intersection, if it affects the passage of vehicles behind, is considered illegal parking but does not result in point deduction. Below is the principle of how electronic surveillance captures red-light running: 1. First photo: When the front wheels of the vehicle press over the induction coil on the ground, the electronic system captures the first photo of the vehicle. 2. Second photo: When the rear wheels of the vehicle press over the induction coil on the ground, the electronic system captures the second photo of the vehicle. 3. Third photo: When the vehicle passes through the intersection and presses over the induction coil on the opposite side of the ground, the electronic system captures the third photo of the vehicle. Below is additional related information: 1. Penalty: Running a red light is a violation of traffic signal rules. Motor vehicle drivers who pass through intersections in violation of traffic signal rules will face corresponding penalties. 2. Red-light running: Typically, if the vehicle stops after crossing the stop line, crossing the line will not result in a penalty. However, if the vehicle does not stop and continues forward, it will be penalized for running a red light.
20
1
Share

How to Determine if a Car's Oil-Gas Separator is Faulty?

If a car's engine experiences shaking after cold starts, burning engine oil, or the engine fault light comes on due to an overly rich air-fuel mixture, it can be determined that the car's oil-gas separator is faulty. It is recommended to promptly visit a 4S shop for inspection to avoid affecting driving safety. Relevant information about the oil-gas separator is as follows: Introduction: The oil-gas separator is a device that separates crude oil and associated natural gas produced from oil wells. The oil-gas separator is placed between the submersible centrifugal pump and the protector, separating free gas from the well fluid. The liquid is sent to the submersible centrifugal pump, while the gas is released into the annular space between the tubing and casing. Function: The oil-gas separator is one of the important components of the entire submersible electric pump system. Its primary function is to serve as the suction inlet for oil and gas entering the multi-stage centrifugal pump. Secondly, before the gas-liquid mixture enters the multi-stage centrifugal pump, the separator removes free gas from the well fluid, thereby reducing the impact of gas on the working characteristics of the submersible electric pump, preventing cavitation and gas lock in the centrifugal pump, and ensuring the normal operation of the multi-stage centrifugal pump.
4
0
Share

How to Drive a Manual Transmission Car for Better Fuel Efficiency?

When going uphill, the engine traction force Fe=Fz+F31, and the car maintains a constant speed; when Fe>Fz+F31, the car accelerates, and the engine requires fuel to do work. As long as you don't stomp on the gas or brakes aggressively, the fuel consumption difference is minimal. Therefore, for cars equipped with cruise control, enabling it on good roads with light traffic to maintain Fe=Fz+F31 and keep the car moving at a constant speed can slightly improve fuel efficiency, though the effect is not significant. On flat roads, F31=0, and Fe=Fz, the car maintains a constant speed; when Fe>Fz, the car accelerates, and the engine requires fuel to do work. Similarly, using cruise control to maintain Fe=Fz and keep the car moving at a constant speed can slightly improve fuel efficiency, though the effect is not significant. (Note: On flat roads, many taxi drivers aggressively step on the gas and then coast in neutral. Long-term observations show that fuel consumption decreases noticeably at lower speeds. However, this method can lead to loss of control at higher speeds and is not recommended.) When going downhill, Fe+F31=Fz, and the car maintains a constant speed; when Fe+F31>Fz, the car accelerates. When F31≥Fz, the engine doesn't require any fuel to do work, and the car can move forward.
9
3
Share

What is the weight of the Mazda CX5?

The weight of the Mazda CX5 typically refers to its curb weight, which varies depending on the model. Currently, there are 10 models of the Mazda CX5 available for sale, with specific weights as follows: The 2022 2.5L Automatic AWD Premium model weighs 1677kg; The 2022 2.5L Automatic 2WD Premium model weighs 1593kg; The 2022 2.0L Automatic 2WD Elegance model weighs 1558kg; The 2022 2.5L Automatic 2WD Smart model weighs 1593kg; The 2020 2.0L Automatic 2WD Comfort model weighs 1514kg; The 2020 2.0L Automatic 2WD Smart model weighs 1535kg; The 2020 2.0L Automatic 2WD Premium model weighs 1553kg; The 2020 2.5L Automatic 2WD Premium model weighs 1593kg; The 2020 2.5L Automatic AWD Premium model weighs 1657kg; The 2020 2.5L Automatic AWD Flagship model weighs 1677kg. The Mazda CX5 is equipped with two types of engines: a lower-displacement 2.0L naturally aspirated engine and a higher-displacement 2.5L naturally aspirated engine. The transmission options include a 6-speed MT manual transmission and a 6-speed automatic transmission with manual mode. The fuel consumption ranges approximately from 6.7L to 7.7L per 100 kilometers.
16
3
Share

Are OEM Wheels Cast or Forged?

OEM wheels are cast. Below is an introduction to the ET value related to wheels: 1. Meaning: The ET value of a wheel refers to the offset between the mounting surface and the centerline of the wheel rim, simply called the offset. The J value represents the shape and height of the wheel flange. 2. Introduction to ET value types: A zero-offset wheel means the mounting surface of the wheel is located at the centerline of the wheel; a positive-offset wheel indicates the distance between the mounting surface and the wheel center is towards the outer side; a negative-offset wheel means the distance between the mounting surface and the wheel center is towards the inner side.
19
0
Share

What type of engine oil is used in the Land Rover Range Rover Sport?

Land Rover Range Rover Sport uses Mobil 1 0W40 engine oil. Below is relevant information: 1. Introduction: The Land Rover Range Rover is a luxury SUV under the Land Rover brand. Meticulously designed, the Range Rover has become the most sophisticated Land Rover ever. Utilizing the latest body and chassis technologies, its all-terrain performance is elevated to another level, whether in terms of the breadth of off-road capabilities and passability or on-road handling and comfort. 2. Overall Design: The vehicle retains the classic boxy exterior design, with its greatest strengths being spacious interiors, excellent handling, and fuel efficiency. It is equipped with three different engines, each with its own advantages, delivering robust power performance overall and enhancing the experience for both passengers and drivers.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.